Hello all, I've some questions regarding iSCSI. Please help me out.
1. If I have added two attempts and are enabled for the same MAC, if the first attempt fails to connect, will the second attempt be tried? 2. If answer to the above is YES, then what's the difference between ISCSI Modes 'Enabled' and 'Enable for MPIO'? 3. In our observation, we've found that the behavior is not same when two attempts are added for IPv4 and IPv6. 4. Are there any standard set of test procedures for ISCSI behavior? The following is the conflict Case 1: Attempt#1------Enabled for MPIO------IPv6-----DHCP Attempt#2------Enabled for MPIO------IPv6-----DHCP Actual behavior: Attempt#2 doesn't show any initiator IPv6 address. Case 2: Attempt 1------Enabled for MPIO------IPv4-----DHCP Attempt 2------Enabled for MPIO------IPv4-----DHCP Actual behavior: Attempt#2 shows Initiator IPv4 address. Please provide your suggestions. Thank you Naveen _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel
