From: Girish Pathak <[email protected]>

There is no functional modification in this change
As preparation for a Change (Rejig of LcdGraphicsOutPutDxe), some
comments are modified and a few new comments are added.
This is to prevent mixing formatting changes with functional
changes.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <[email protected]>
Signed-off-by: Evan Lloyd <[email protected]>
---
 ArmPlatformPkg/Include/Library/LcdPlatformLib.h                                
    | 80 +++++++++++++++-----
 ArmPlatformPkg/ArmVExpressPkg/Library/HdLcdArmVExpressLib/HdLcdArmVExpress.c   
    | 63 ++++++++++++++-
 
ArmPlatformPkg/ArmVExpressPkg/Library/PL111LcdArmVExpressLib/PL111LcdArmVExpress.c
 | 68 ++++++++++++++++-
 ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/HdLcd.c                            
    | 20 +++++
 ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.c             
    |  4 +-
 ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111Lcd.c                         
    | 22 +++++-
 6 files changed, 231 insertions(+), 26 deletions(-)

diff --git a/ArmPlatformPkg/Include/Library/LcdPlatformLib.h 
b/ArmPlatformPkg/Include/Library/LcdPlatformLib.h
index 
72ebcd02ddb321ee0dad51c87ac8ee876d9ca21c..48bdd8a51411137df040aa797fcff272785f7a35
 100644
--- a/ArmPlatformPkg/Include/Library/LcdPlatformLib.h
+++ b/ArmPlatformPkg/Include/Library/LcdPlatformLib.h
@@ -18,9 +18,7 @@
 
 #define LCD_VRAM_SIZE                     SIZE_8MB
 
-//
 // Modes definitions
-//
 #define VGA                               0
 #define SVGA                              1
 #define XGA                               2
@@ -29,9 +27,7 @@
 #define UXGA                              5
 #define HD                                6
 
-//
 // VGA Mode: 640 x 480
-//
 #define VGA_H_RES_PIXELS                  640
 #define VGA_V_RES_PIXELS                  480
 #define VGA_OSC_FREQUENCY                 23750000  /* 0x016A6570 */
@@ -44,9 +40,7 @@
 #define VGA_V_FRONT_PORCH                 (  3 - 1)
 #define VGA_V_BACK_PORCH                  ( 13 - 1)
 
-//
 // SVGA Mode: 800 x 600
-//
 #define SVGA_H_RES_PIXELS                 800
 #define SVGA_V_RES_PIXELS                 600
 #define SVGA_OSC_FREQUENCY                38250000  /* 0x0247A610 */
@@ -59,9 +53,7 @@
 #define SVGA_V_FRONT_PORCH                (  3 - 1)
 #define SVGA_V_BACK_PORCH                 ( 17 - 1)
 
-//
 // XGA Mode: 1024 x 768
-//
 #define XGA_H_RES_PIXELS                  1024
 #define XGA_V_RES_PIXELS                  768
 #define XGA_OSC_FREQUENCY                 63500000  /* 0x03C8EEE0 */
@@ -74,9 +66,7 @@
 #define XGA_V_FRONT_PORCH                 (  3 - 1)
 #define XGA_V_BACK_PORCH                  ( 23 - 1)
 
-//
 // SXGA Mode: 1280 x 1024
-//
 #define SXGA_H_RES_PIXELS                 1280
 #define SXGA_V_RES_PIXELS                 1024
 #define SXGA_OSC_FREQUENCY                109000000  /* 0x067F3540 */
@@ -89,9 +79,7 @@
 #define SXGA_V_FRONT_PORCH                (  3 - 1)
 #define SXGA_V_BACK_PORCH                 ( 29 - 1)
 
-//
 // WSXGA+ Mode: 1680 x 1050
-//
 #define WSXGA_H_RES_PIXELS                1680
 #define WSXGA_V_RES_PIXELS                1050
 #define WSXGA_OSC_FREQUENCY               147000000  /* 0x08C30AC0 */
@@ -104,9 +92,7 @@
 #define WSXGA_V_FRONT_PORCH               (  4 - 1)
 #define WSXGA_V_BACK_PORCH                ( 41 - 1)
 
-//
 // UXGA Mode: 1600 x 1200
-//
 #define UXGA_H_RES_PIXELS                 1600
 #define UXGA_V_RES_PIXELS                 1200
 #define UXGA_OSC_FREQUENCY                161000000  /* 0x0998AA40 */
@@ -119,9 +105,7 @@
 #define UXGA_V_FRONT_PORCH                (  3 - 1)
 #define UXGA_V_BACK_PORCH                 ( 38 - 1)
 
-//
 // HD Mode: 1920 x 1080
-//
 #define HD_H_RES_PIXELS                   1920
 #define HD_V_RES_PIXELS                   1080
 #define HD_OSC_FREQUENCY                  165000000  /* 0x09D5B340 */
@@ -134,10 +118,7 @@
 #define HD_V_FRONT_PORCH                  (  3 - 1)
 #define HD_V_BACK_PORCH                   ( 32 - 1)
 
-//
 // Colour Masks
-//
-
 #define LCD_24BPP_RED_MASK              0x00FF0000
 #define LCD_24BPP_GREEN_MASK            0x0000FF00
 #define LCD_24BPP_BLUE_MASK             0x000000FF
@@ -171,34 +152,85 @@ typedef enum {
   LCD_BITS_PER_PIXEL_12_444
 } LCD_BPP;
 
-
+/** Platform related initialization function.
+  *
+  * @param IN Handle               Handle to the LCD device instance.
+  *
+  * @retval EFI_SUCCESS            Platform initialization success.
+  * @retval !(EFI_SUCCESS)         Other errors.
+**/
 EFI_STATUS
 LcdPlatformInitializeDisplay (
   IN EFI_HANDLE   Handle
   );
 
+/** Reserve VRAM memory in DRAM for the frame buffer
+  * (unless it is reserved already).
+  *
+  * The allocated address can be used to set the frame buffer.
+  * @param OUT VramBaseAddress      A pointer to the frame buffer address.
+  * @param OUT VramSize             A pointer to the size of the frame
+  *                                 buffer in bytes
+  *
+  * @retval EFI_SUCCESS             Frame buffer memory allocation success.
+  * @retval !(EFI_SUCCESS)          Other errors.
+**/
 EFI_STATUS
 LcdPlatformGetVram (
   OUT EFI_PHYSICAL_ADDRESS*                 VramBaseAddress,
   OUT UINTN*                                VramSize
   );
 
+/** Return total number of modes.
+  *
+  * @retval UINT32             Mode Number.
+**/
 UINT32
 LcdPlatformGetMaxMode (
   VOID
   );
 
+/** Set the requested display mode.
+  *
+  * @param IN ModeNumber             Mode Number.
+  * @retval   EFI_SUCCESS            Set mode success.
+  * @retval   EFI_INVALID_PARAMTER   Requested mode not found.
+**/
 EFI_STATUS
 LcdPlatformSetMode (
   IN UINT32                                 ModeNumber
   );
 
+/** Return information for the requested mode number.
+  *
+  * @param IN ModeNumber            Mode Number.
+  * @param OUT Info                 Pointer for returned mode information
+  *                                 (on success).
+  *
+  * @retval EFI_SUCCESS             Success if the requested mode is found.
+  * @retval EFI_INVALID_PARAMETER   Requested mode not found.
+**/
 EFI_STATUS
 LcdPlatformQueryMode (
   IN  UINT32                                ModeNumber,
   OUT EFI_GRAPHICS_OUTPUT_MODE_INFORMATION  *Info
   );
 
+/** Returns the display timing information for the requested mode number.
+  *
+  * @param IN  ModeNumber           Mode Number.
+  * @param OUT HRes                 Pointer to horizontal resolution.
+  * @param OUT HSync                Pointer to horizontal sync width.
+  * @param OUT HBackPorch           Pointer to horizontal back porch.
+  * @param OUT HFrontPorch          Pointer to horizontal front porch.
+  * @param OUT VRes                 Pointer to vertical resolution.
+  * @param OUT VSync                Pointer to vertical sync width.
+  * @param OUT VBackPorch           Pointer to vertical back porch.
+  * @param OUT VFrontPorch          Pointer to vertical front porch.
+
+  * @retval EFI_SUCCESS             Success if the requested mode is found.
+  * @retval EFI_INVALID_PARAMETER   Requested mode not found.
+**/
 EFI_STATUS
 LcdPlatformGetTimings (
   IN  UINT32                              ModeNumber,
@@ -212,6 +244,14 @@ LcdPlatformGetTimings (
   OUT UINT32*                             VFrontPorch
   );
 
+/** Return bits per pixel information for a mode number.
+  *
+  * @param IN  ModeNumber           Mode Number.
+  * @param OUT Bpp                  Pointer to value Bytes Per Pixel.
+  *
+  * @retval EFI_SUCCESS             The requested mode is found.
+  * @retval EFI_INVALID_PARAMETER   Requested mode not found.
+**/
 EFI_STATUS
 LcdPlatformGetBpp (
   IN  UINT32                                ModeNumber,
diff --git 
a/ArmPlatformPkg/ArmVExpressPkg/Library/HdLcdArmVExpressLib/HdLcdArmVExpress.c 
b/ArmPlatformPkg/ArmVExpressPkg/Library/HdLcdArmVExpressLib/HdLcdArmVExpress.c
index 
2041de5f63c72de6f0ce4047420c282507a1d04a..cfe3259d3c737de240350e8c3eab867b80c40948
 100644
--- 
a/ArmPlatformPkg/ArmVExpressPkg/Library/HdLcdArmVExpressLib/HdLcdArmVExpress.c
+++ 
b/ArmPlatformPkg/ArmVExpressPkg/Library/HdLcdArmVExpressLib/HdLcdArmVExpress.c
@@ -44,7 +44,8 @@ typedef struct {
   UINT32                     VFrontPorch;
 } LCD_RESOLUTION;
 
-
+/** The display modes supported by the platform.
+**/
 LCD_RESOLUTION mResolutions[] = {
   { // Mode 0 : VGA : 640 x 480 x 24 bpp
     VGA, VGA_H_RES_PIXELS, VGA_V_RES_PIXELS, LCD_BITS_PER_PIXEL_24,
@@ -94,6 +95,11 @@ EFI_EDID_ACTIVE_PROTOCOL      mEdidActive = {
   NULL
 };
 
+/** HDLCD Platform specific initialization function.
+  *
+  * @retval EFI_SUCCESS            Plaform library initialization success.
+  * @retval !(EFI_SUCCESS)         Other errors.
+**/
 EFI_STATUS
 LcdPlatformInitializeDisplay (
   IN EFI_HANDLE   Handle
@@ -124,6 +130,18 @@ LcdPlatformInitializeDisplay (
   return Status;
 }
 
+/** Reserve VRAM memory in DRAM for the frame buffer
+  * (unless it is reserved already).
+  *
+  * The allocated address can be used to set the frame buffer.
+  *
+  * @param OUT VramBaseAddress      A pointer to the frame buffer address.
+  * @param OUT VramSize             A pointer to the size of the frame
+  *                                 buffer in bytes
+  *
+  * @retval EFI_SUCCESS             Frame buffer memory allocation success.
+  * @retval !(EFI_SUCCESS)          Other errors.
+**/
 EFI_STATUS
 LcdPlatformGetVram (
   OUT EFI_PHYSICAL_ADDRESS*  VramBaseAddress,
@@ -170,6 +188,13 @@ LcdPlatformGetVram (
   return EFI_SUCCESS;
 }
 
+/** Return total number of modes supported.
+  *
+  * Note: Valid mode numbers are 0 to MaxMode - 1
+  * See Section 11.9 of the UEFI Specification 2.6 Errata A (Jan 2017)
+  *
+  * @retval UINT32             Mode Number.
+**/
 UINT32
 LcdPlatformGetMaxMode(VOID)
 {
@@ -178,6 +203,10 @@ LcdPlatformGetMaxMode(VOID)
   return (sizeof (mResolutions) / sizeof (LCD_RESOLUTION));
 }
 
+/** Set the requested display mode.
+  *
+  * @param IN ModeNumber             Mode Number.
+**/
 EFI_STATUS
 LcdPlatformSetMode (
   IN UINT32                         ModeNumber
@@ -227,6 +256,15 @@ LcdPlatformSetMode (
   return Status;
 }
 
+/** Return information for the requested mode number.
+  *
+  * @param IN ModeNumber            Mode Number.
+  * @param OUT Info                 Pointer for returned mode information
+  *                                 (on success).
+  *
+  * @retval EFI_SUCCESS             Success if the requested mode is found.
+  * @retval EFI_INVALID_PARAMETER   Requested mode not found.
+**/
 EFI_STATUS
 LcdPlatformQueryMode (
   IN  UINT32                                ModeNumber,
@@ -267,6 +305,21 @@ LcdPlatformQueryMode (
   return EFI_SUCCESS;
 }
 
+/** Returns the display timing information for the requested mode number.
+  *
+  * @param IN  ModeNumber           Mode Number.
+  * @param OUT HRes                 Pointer to horizontal resolution.
+  * @param OUT HSync                Pointer to horizontal sync width.
+  * @param OUT HBackPorch           Pointer to horizontal back porch.
+  * @param OUT HFrontPorch          Pointer to horizontal front porch.
+  * @param OUT VRes                 Pointer to vertical resolution.
+  * @param OUT VSync                Pointer to vertical sync width.
+  * @param OUT VBackPorch           Pointer to vertical back porch.
+  * @param OUT VFrontPorch          Pointer to vertical front porch.
+  *
+  * @retval EFI_SUCCESS             Success if the requested mode is found.
+  * @retval EFI_INVALID_PARAMETER   Requested mode not found.
+**/
 EFI_STATUS
 LcdPlatformGetTimings (
   IN  UINT32                              ModeNumber,
@@ -296,6 +349,14 @@ LcdPlatformGetTimings (
   return EFI_SUCCESS;
 }
 
+/** Return bits per pixel for a mode number.
+  *
+  * @param IN  ModeNumber           Mode Number.
+  * @param OUT Bpp                  Pointer to value Bits Per Pixel.
+  *
+  * @retval EFI_SUCCESS             The requested mode is found.
+  * @retval EFI_INVALID_PARAMETER   Requested mode not found.
+**/
 EFI_STATUS
 LcdPlatformGetBpp (
   IN  UINT32                              ModeNumber,
diff --git 
a/ArmPlatformPkg/ArmVExpressPkg/Library/PL111LcdArmVExpressLib/PL111LcdArmVExpress.c
 
b/ArmPlatformPkg/ArmVExpressPkg/Library/PL111LcdArmVExpressLib/PL111LcdArmVExpress.c
index 
8d046816454f642bced00e29c4e02093b74afd24..84880e5fd1dfe6f824b27e53926f9bb32ff6cdf7
 100644
--- 
a/ArmPlatformPkg/ArmVExpressPkg/Library/PL111LcdArmVExpressLib/PL111LcdArmVExpress.c
+++ 
b/ArmPlatformPkg/ArmVExpressPkg/Library/PL111LcdArmVExpressLib/PL111LcdArmVExpress.c
@@ -41,7 +41,8 @@ typedef struct {
   UINT32                     VFrontPorch;
 } LCD_RESOLUTION;
 
-
+/** The display modes supported by the platform.
+**/
 LCD_RESOLUTION mResolutions[] = {
   {   // Mode 0 : VGA : 640 x 480 x 24 bpp
       VGA, VGA_H_RES_PIXELS, VGA_V_RES_PIXELS, LCD_BITS_PER_PIXEL_24,
@@ -151,7 +152,11 @@ EFI_EDID_ACTIVE_PROTOCOL      mEdidActive = {
   NULL
 };
 
-
+/** PL111 Platform specific initialization function.
+  *
+  * @retval EFI_SUCCESS            Plaform library initialization success.
+  * @retval !(EFI_SUCCESS)         Other errors.
+**/
 EFI_STATUS
 LcdPlatformInitializeDisplay (
   IN EFI_HANDLE   Handle
@@ -176,6 +181,18 @@ LcdPlatformInitializeDisplay (
   return Status;
 }
 
+/** Reserve VRAM memory in DRAM for the frame buffer
+  * (unless it is reserved already).
+  *
+  * The allocated address can be used to set the frame buffer.
+  *
+  * @param OUT VramBaseAddress      A pointer to the frame buffer address.
+  * @param OUT VramSize             A pointer to the size of the frame
+  *                                 buffer in bytes
+  *
+  * @retval EFI_SUCCESS             Frame buffer memory allocation success.
+  * @retval !(EFI_SUCCESS)          Other errors.
+**/
 EFI_STATUS
 LcdPlatformGetVram (
   OUT EFI_PHYSICAL_ADDRESS*  VramBaseAddress,
@@ -232,6 +249,13 @@ LcdPlatformGetVram (
   return Status;
 }
 
+/** Return total number of modes supported.
+  *
+  * Note: Valid mode numbers are 0 to MaxMode - 1
+  * See Section 11.9 of the UEFI Specification 2.6 Errata A (Jan 2017)
+  *
+  * @retval UINT32             Mode Number.
+**/
 UINT32
 LcdPlatformGetMaxMode(VOID)
 {
@@ -249,6 +273,14 @@ LcdPlatformGetMaxMode(VOID)
   return (PcdGet32 (PcdPL111LcdMaxMode));
 }
 
+/** Set the requested display mode.
+  *
+  * @param IN ModeNumber            Mode Number.
+  *
+  * @retval  EFI_INVALID_PARAMETER  Requested mode not found.
+  * @retval  EFI_UNSUPPORTED        PLL111 configuration not supported.
+  * @retval  !(EFI_SUCCESS)         Other errors.
+**/
 EFI_STATUS
 LcdPlatformSetMode (
   IN UINT32                         ModeNumber
@@ -320,6 +352,15 @@ LcdPlatformSetMode (
   return Status;
 }
 
+/** Return information for the requested mode number.
+  *
+  * @param IN ModeNumber            Mode Number.
+  * @param OUT Info                 Pointer for returned mode information
+  *                                 (on success).
+  *
+  * @retval EFI_SUCCESS             Success if the requested mode is found.
+  * @retval EFI_INVALID_PARAMETER   Requested mode not found.
+**/
 EFI_STATUS
 LcdPlatformQueryMode (
   IN  UINT32                                ModeNumber,
@@ -360,6 +401,21 @@ LcdPlatformQueryMode (
   return EFI_SUCCESS;
 }
 
+/** Returns the display timing information for the requested mode number.
+  *
+  * @param IN  ModeNumber           Mode Number.
+  * @param OUT HRes                 Pointer to horizontal resolution.
+  * @param OUT HSync                Pointer to horizontal sync width.
+  * @param OUT HBackPorch           Pointer to horizontal back porch.
+  * @param OUT HFrontPorch          Pointer to horizontal front porch.
+  * @param OUT VRes                 Pointer to vertical resolution.
+  * @param OUT VSync                Pointer to vertical sync width.
+  * @param OUT VBackPorch           Pointer to vertical back porch.
+  * @param OUT VFrontPorch          Pointer to vertical front porch.
+  *
+  * @retval EFI_SUCCESS             Success if the requested mode is found.
+  * @retval EFI_INVALID_PARAMETER   Requested mode not found.
+**/
 EFI_STATUS
 LcdPlatformGetTimings (
   IN  UINT32                              ModeNumber,
@@ -389,6 +445,14 @@ LcdPlatformGetTimings (
   return EFI_SUCCESS;
 }
 
+/** Return bits per pixel for a mode number.
+  *
+  * @param IN  ModeNumber           Mode Number.
+  * @param OUT Bpp                  Pointer to value Bits Per Pixel.
+  *
+  * @retval EFI_SUCCESS             The requested mode is found.
+  * @retval EFI_INVALID_PARAMETER   Requested mode not found.
+**/
 EFI_STATUS
 LcdPlatformGetBpp (
   IN  UINT32                              ModeNumber,
diff --git a/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/HdLcd.c 
b/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/HdLcd.c
index 
eb0b6fb3fbbc1cb605469433f6c6dcb85bac668c..744dd3d556b5071defc6bcad5a9a30881bcb4b6f
 100644
--- a/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/HdLcd.c
+++ b/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/HdLcd.c
@@ -29,6 +29,12 @@
  *
  **********************************************************************/
 
+/** Initialize display.
+  *
+  * @param  VramBaseAddress        Address of the frame buffer.
+  *
+  * @retval EFI_SUCCESS            Display initialization success.
+**/
 EFI_STATUS
 LcdInitialize (
   IN EFI_PHYSICAL_ADDRESS   VramBaseAddress
@@ -67,6 +73,12 @@ LcdInitialize (
   return EFI_SUCCESS;
 }
 
+/** Set requested mode of the display.
+  *
+  * @param  ModeNumber             Display mode number.
+  * @retval EFI_SUCCESS            Display set mode success.
+  * @retval EFI_DEVICE_ERROR       If mode not found/supported.
+**/
 EFI_STATUS
 LcdSetMode (
   IN UINT32  ModeNumber
@@ -136,6 +148,8 @@ LcdSetMode (
   return EFI_SUCCESS;
 }
 
+/** De-initializes the display.
+**/
 VOID
 LcdShutdown (
   VOID
@@ -145,6 +159,12 @@ LcdShutdown (
   MmioWrite32 (HDLCD_REG_COMMAND, HDLCD_DISABLE);
 }
 
+/** Check for presence of HDLCD.
+  *
+  * @retval EFI_SUCCESS            Platform implements HDLCD.
+  * @retval EFI_NOT_FOUND          HDLCD display controller not
+  *                                found.
+**/
 EFI_STATUS
 LcdIdentify (
   VOID
diff --git a/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.c 
b/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.c
index 
2dd8f39873f77b1c211bff407cabe90c1795b121..c40c8e0fa6f4b5f7798aeb3c8bf3f261f14cb67b
 100644
--- a/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.c
+++ b/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.c
@@ -357,8 +357,8 @@ LcdGraphicsSetMode (
     goto EXIT;
   }
 
-  // The UEFI spec requires that we now clear the visible portions of the
-  // output display to black.
+  /* The UEFI spec requires that we now clear the visible portions of the
+   * output display to black. */
 
   // Set the fill colour to black
   SetMem (&FillColour, sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL), 0x0);
diff --git a/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111Lcd.c 
b/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111Lcd.c
index 
0b0c4204fbc44bc9e90dce3d7b410ce167d9f40c..f8a3c1f8266c0a11f111c3747688defc0d49877c
 100644
--- a/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111Lcd.c
+++ b/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111Lcd.c
@@ -26,6 +26,12 @@
  *
  **********************************************************************/
 
+/** Check for presence of PL111.
+  *
+  * @retval EFI_SUCCESS            Platform implements PL111.
+  * @retval EFI_NOT_FOUND          PL111 display controller not
+  *                                found.
+**/
 EFI_STATUS
 LcdIdentify (
   VOID
@@ -48,6 +54,12 @@ LcdIdentify (
   return EFI_NOT_FOUND;
 }
 
+/** Initialize display.
+  *
+  * @param  VramBaseAddress        Address of the frame buffer.
+  *
+  * @retval EFI_SUCCESS            Display initialization success.
+**/
 EFI_STATUS
 LcdInitialize (
   IN EFI_PHYSICAL_ADDRESS   VramBaseAddress
@@ -63,6 +75,12 @@ LcdInitialize (
   return EFI_SUCCESS;
 }
 
+/** Set requested mode of the display.
+  *
+  * @param  ModeNumber             Display mode number.
+  * @retval EFI_SUCCESS            Display set mode success.
+  * @retval EFI_DEVICE_ERROR       If mode not found/supported.
+**/
 EFI_STATUS
 LcdSetMode (
   IN UINT32  ModeNumber
@@ -123,7 +141,7 @@ LcdSetMode (
 
   // PL111_REG_LCD_CONTROL
   LcdControl = PL111_CTRL_LCD_EN | PL111_CTRL_LCD_BPP (LcdBpp)
-                 | PL111_CTRL_LCD_TFT | PL111_CTRL_BGR;
+               | PL111_CTRL_LCD_TFT | PL111_CTRL_BGR;
 
   MmioWrite32 (PL111_REG_LCD_CONTROL, LcdControl);
 
@@ -134,6 +152,8 @@ LcdSetMode (
   return EFI_SUCCESS;
 }
 
+/** De-initializes the display.
+*/
 VOID
 LcdShutdown (
   VOID
-- 
Guid("CE165669-3EF3-493F-B85D-6190EE5B9759")

_______________________________________________
edk2-devel mailing list
[email protected]
https://lists.01.org/mailman/listinfo/edk2-devel

Reply via email to