On Fri, Nov 10, 2017 at 02:21:23PM +0000, Ard Biesheuvel wrote: > Add a RealTimeClockLib implementation for the NXP PCF8563 as used on > the Socionext Developer Box board. Note that the standard I2C protocol > stack does not support runtime use, so this driver invokes the I2C master > protocol directly. This requires support from the platform side as well, > and so this driver will only attach to a I2C master that has the > gPcf8563RealTimeClockLibI2cMasterProtolGuid protocol installed on its > handle. It is up to the platform to ensure that the driver producing > the I2C master protocol in question is runtime capable, and is not > shared with the I2C protocol stack (i.e., it should not have the I2C > Bus Configuration Management protocol installed as well).
Any chance you can flip the order of this and the subsequent one if this one explicitly won't bind unless... > Contributed-under: TianoCore Contribution Agreement 1.1 > Signed-off-by: Ard Biesheuvel <ard.biesheu...@linaro.org> > --- > Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.c | > 402 ++++++++++++++++++++ > Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.dec | > 29 ++ > Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.inf | > 52 +++ > 3 files changed, 483 insertions(+) > > diff --git > a/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.c > b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.c > new file mode 100644 > index 000000000000..67f8e7de4025 > --- /dev/null > +++ b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.c > @@ -0,0 +1,402 @@ > +/** @file > + > + Copyright (c) 2017, Linaro, Ltd. All rights reserved.<BR> > + > + This program and the accompanying materials > + are licensed and made available under the terms and conditions of the BSD > License > + which accompanies this distribution. The full text of the license may be > found at > + http://opensource.org/licenses/bsd-license.php > + > + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR > IMPLIED. > + > +**/ > + > +#include <PiDxe.h> > +#include <Library/DebugLib.h> > +#include <Library/IoLib.h> > +#include <Library/RealTimeClockLib.h> > +#include <Library/UefiBootServicesTableLib.h> > +#include <Library/UefiLib.h> > +#include <Library/UefiRuntimeLib.h> > +#include <Protocol/I2cMaster.h> > + > +#define SLAVE_ADDRESS (FixedPcdGet8 (PcdI2cSlaveAddress)) > +#define PCF8563_DATA_REG_OFFSET 0x2 > + > +#define PCF8563_SECONDS_MASK 0x7f > +#define PCF8563_MINUTES_MASK 0x7f > +#define PCF8563_HOURS_MASK 0x3f > +#define PCF8563_DAYS_MASK 0x3f > +#define PCF8563_WEEKDAYS_MASK 0x07 > +#define PCF8563_MONTHS_MASK 0x1f > +#define PCF8563_CENTURY_MASK 0x80 > + > +// > +// The PCF8563 has a 'century' flag, which means it could theoretically span > +// 200 years. However, it treats all years divisible by 4 as leap years, > +// including the years 1900 and 2100 (which are not leap years), so the only > +// sane base year is 2000 (which was a leap year). > +// > +#define EPOCH_BASE 2000 > + > +STATIC EFI_HANDLE mI2cMasterHandle; > +STATIC VOID *mDriverEventRegistration; > +STATIC EFI_I2C_MASTER_PROTOCOL *mI2cMaster; > +STATIC EFI_EVENT mRtcVirtualAddrChangeEvent; > + > +#pragma pack(1) > +typedef struct { > + UINT8 VL_seconds; > + UINT8 Minutes; > + UINT8 Hours; > + UINT8 Days; > + UINT8 Weekdays; > + UINT8 Century_months; > + UINT8 Years; > +} RTC_DATETIME; > + > +typedef struct { > + UINT8 Reg; > + RTC_DATETIME DateTime; > +} RTC_SET_DATETIME_PACKET; > +#pragma pack() > + > +typedef struct { > + UINTN OperationCount; > + EFI_I2C_OPERATION SetAddressOp; > + EFI_I2C_OPERATION GetDateTimeOp; > +} RTC_GET_I2C_REQUEST; > + > +typedef EFI_I2C_REQUEST_PACKET RTC_SET_I2C_REQUEST; > +/** > + Returns the current time and date information, and the time-keeping > + capabilities of the hardware platform. > + > + @param Time A pointer to storage to receive a snapshot of > + the current time. > + @param Capabilities An optional pointer to a buffer to receive > the > + real time clock device's capabilities. > + > + @retval EFI_SUCCESS The operation completed successfully. > + @retval EFI_INVALID_PARAMETER Time is NULL. > + @retval EFI_DEVICE_ERROR The time could not be retrieved due to > hardware > + error. > + > +**/ > +EFI_STATUS > +EFIAPI > +LibGetTime ( > + OUT EFI_TIME *Time, > + OUT EFI_TIME_CAPABILITIES *Capabilities > + ) > +{ > + RTC_GET_I2C_REQUEST Op; > + RTC_DATETIME DateTime; > + EFI_STATUS Status; > + UINT8 Reg; > + > + if (Time == NULL) { > + return EFI_INVALID_PARAMETER; > + } > + > + if (mI2cMaster == NULL) { > + return EFI_DEVICE_ERROR; > + } > + > + Reg = PCF8563_DATA_REG_OFFSET; > + > + Op.OperationCount = 2; > + > + Op.SetAddressOp.Flags = 0; > + Op.SetAddressOp.LengthInBytes = 1; > + Op.SetAddressOp.Buffer = &Reg; > + > + Op.GetDateTimeOp.Flags = I2C_FLAG_READ; > + Op.GetDateTimeOp.LengthInBytes = sizeof (RTC_DATETIME); > + Op.GetDateTimeOp.Buffer = (VOID *)&DateTime; > + > + Status = mI2cMaster->StartRequest (mI2cMaster, SLAVE_ADDRESS, > + (VOID *)&Op, NULL, NULL); > + if (EFI_ERROR (Status)) { > + return EFI_DEVICE_ERROR; > + } > + > + Time->Second = BcdToDecimal8 (DateTime.VL_seconds & PCF8563_SECONDS_MASK); > + Time->Minute = BcdToDecimal8 (DateTime.Minutes & PCF8563_MINUTES_MASK); > + Time->Hour = BcdToDecimal8 (DateTime.Hours & PCF8563_HOURS_MASK); > + Time->Day = BcdToDecimal8 (DateTime.Days & PCF8563_DAYS_MASK); > + Time->Month = BcdToDecimal8 (DateTime.Century_months & > PCF8563_MONTHS_MASK); > + Time->Year = BcdToDecimal8 (DateTime.Years) + EPOCH_BASE; > + > + if (DateTime.Century_months & PCF8563_CENTURY_MASK) { > + Time->Year += 100; > + } > + > + if (Capabilities != NULL) { > + Capabilities->Resolution = 1; > + Capabilities->Accuracy = 0; > + Capabilities->SetsToZero = TRUE; > + } > + return EFI_SUCCESS; > +} > + > + > +/** > + Sets the current local time and date information. > + > + @param Time A pointer to the current time. > + > + @retval EFI_SUCCESS The operation completed successfully. > + @retval EFI_INVALID_PARAMETER A time field is out of range. > + @retval EFI_DEVICE_ERROR The time could not be set due due to hardware > + error. > + > +**/ > +EFI_STATUS > +EFIAPI > +LibSetTime ( > + IN EFI_TIME *Time > + ) > +{ > + RTC_SET_I2C_REQUEST Op; > + RTC_SET_DATETIME_PACKET Packet; > + EFI_STATUS Status; > + > + if (mI2cMaster == NULL) { > + return EFI_DEVICE_ERROR; > + } > + > + Packet.DateTime.VL_seconds = DecimalToBcd8 (Time->Second); > + Packet.DateTime.Minutes = DecimalToBcd8 (Time->Minute); > + Packet.DateTime.Hours = DecimalToBcd8 (Time->Hour); > + Packet.DateTime.Days = DecimalToBcd8 (Time->Day); > + Packet.DateTime.Weekdays = 0; > + Packet.DateTime.Century_months = DecimalToBcd8 (Time->Month); > + Packet.DateTime.Years = DecimalToBcd8 (Time->Year % 100); > + if (Time->Year >= EPOCH_BASE + 100) { > + if (Time->Year >= EPOCH_BASE + 200) { > + return EFI_DEVICE_ERROR; > + } > + Packet.DateTime.Century_months |= PCF8563_CENTURY_MASK; > + } > + > + Packet.Reg = PCF8563_DATA_REG_OFFSET; > + > + Op.OperationCount = 1; > + Op.Operation[0].Flags = 0; > + Op.Operation[0].LengthInBytes = sizeof (RTC_SET_DATETIME_PACKET); > + Op.Operation[0].Buffer = (VOID *)&Packet; > + > + Status = mI2cMaster->StartRequest (mI2cMaster, SLAVE_ADDRESS, > + (VOID *)&Op, NULL, NULL); > + if (EFI_ERROR (Status)) { > + return EFI_DEVICE_ERROR; > + } > + return EFI_SUCCESS; > +} > + > + > +/** > + Returns the current wakeup alarm clock setting. > + > + @param Enabled Indicates if the alarm is currently enabled > or > + disabled. > + @param Pending Indicates if the alarm signal is pending and > + requires acknowledgement. > + @param Time The current alarm setting. > + > + @retval EFI_SUCCESS The alarm settings were returned. > + @retval EFI_INVALID_PARAMETER Any parameter is NULL. > + @retval EFI_DEVICE_ERROR The wakeup time could not be retrieved due > to a > + hardware error. > + @retval EFI_UNSUPPORTED A wakeup timer is not supported on this > + platform. > + > +**/ > +EFI_STATUS > +EFIAPI > +LibGetWakeupTime ( > + OUT BOOLEAN *Enabled, > + OUT BOOLEAN *Pending, > + OUT EFI_TIME *Time > + ) > +{ > + // > + // Currently unimplemented. The PCF8563 does not support setting the alarm > + // for an arbitrary date/time, but only for a minute/hour/day/weekday > + // combination. It should also depend on a platform specific setting that > + // indicates whether the PCF8563's interrupt line is connected in a way > that > + // allows it to power up the system in the first place. > + // > + return EFI_UNSUPPORTED; > +} > + > + > +/** > + Sets the system wakeup alarm clock time. > + > + @param Enabled Enable or disable the wakeup alarm. > + @param Time If Enable is TRUE, the time to set the wakeup > + alarm for. > + > + @retval EFI_SUCCESS If Enable is TRUE, then the wakeup alarm was > + enabled. If Enable is FALSE, then the wakeup > + alarm was disabled. > + @retval EFI_INVALID_PARAMETER A time field is out of range. > + @retval EFI_DEVICE_ERROR The wakeup time could not be set due to a > + hardware error. > + @retval EFI_UNSUPPORTED A wakeup timer is not supported on this > + platform. > + > +**/ > +EFI_STATUS > +EFIAPI > +LibSetWakeupTime ( > + IN BOOLEAN Enabled, > + OUT EFI_TIME *Time > + ) > +{ > + // see comment above > + return EFI_UNSUPPORTED; > +} > + > +STATIC > +VOID > +DriverRegistrationEvent ( > + IN EFI_EVENT Event, > + IN VOID *Context > + ) > +{ > + EFI_HANDLE Handle[2]; > + UINTN BufferSize; > + EFI_STATUS Status; > + EFI_I2C_MASTER_PROTOCOL *I2cMaster; > + UINTN BusFrequency; > + > + // > + // Try to connect the newly registered driver to our handle. > + // > + do { > + BufferSize = sizeof (EFI_HANDLE); > + Status = gBS->LocateHandle (ByRegisterNotify, > + &gEfiDriverBindingProtocolGuid, > + mDriverEventRegistration, > + &BufferSize, > + Handle); > + if (EFI_ERROR (Status)) { > + if (Status != EFI_NOT_FOUND) { > + DEBUG ((DEBUG_WARN, "%a: gBS->LocateHandle () returned %r\n", > + __FUNCTION__, Status)); > + } > + break; > + } > + > + // > + // Check if we can connect our handle to this driver. > + // > + Handle[1] = NULL; > + Status = gBS->ConnectController (mI2cMasterHandle, Handle, NULL, FALSE); > + if (EFI_ERROR (Status)) { > + continue; > + } > + > + DEBUG ((DEBUG_INFO, "%a: found I2C master!\n", __FUNCTION__)); > + > + gBS->CloseEvent (Event); > + > + Status = gBS->OpenProtocol (mI2cMasterHandle, &gEfiI2cMasterProtocolGuid, > + (VOID **)&I2cMaster, gImageHandle, NULL, > + EFI_OPEN_PROTOCOL_EXCLUSIVE); > + ASSERT_EFI_ERROR (Status); > + > + Status = I2cMaster->Reset (I2cMaster); > + if (EFI_ERROR (Status)) { > + DEBUG ((DEBUG_ERROR, "%a: I2CMaster->Reset () failed - %r\n", > + __FUNCTION__, Status)); > + break; > + } > + > + BusFrequency = FixedPcdGet16 (PcdI2cBusFrequency); > + Status = I2cMaster->SetBusFrequency (I2cMaster, &BusFrequency); > + if (EFI_ERROR (Status)) { > + DEBUG ((DEBUG_ERROR, "%a: I2CMaster->SetBusFrequency () failed - %r\n", > + __FUNCTION__, Status)); > + break; > + } > + > + mI2cMaster = I2cMaster; > + break; > + } while (TRUE); > +} > + > +/** > + Fixup internal data so that EFI can be call in virtual mode. > + Call the passed in Child Notify event and convert any pointers in > + lib to virtual mode. > + > + @param[in] Event The Event that is being processed > + @param[in] Context Event Context > +**/ > +VOID > +EFIAPI > +LibRtcVirtualNotifyEvent ( > + IN EFI_EVENT Event, > + IN VOID *Context > + ) > +{ > + EfiConvertPointer (0x0, (VOID **)&mI2cMaster); > +} > + > +/** > + Library entry point > + > + @param ImageHandle Handle that identifies the loaded image. > + @param SystemTable System Table for this image. > + > + @retval EFI_SUCCESS The operation completed successfully. > + > +**/ > +EFI_STATUS > +EFIAPI > +LibRtcInitialize ( > + IN EFI_HANDLE ImageHandle, > + IN EFI_SYSTEM_TABLE *SystemTable > + ) > +{ > + EFI_STATUS Status; > + UINTN BufferSize; > + > + // > + // Find the handle that marks the controller > + // that will provide the I2C master protocol. > + // > + BufferSize = sizeof (EFI_HANDLE); > + Status = gBS->LocateHandle (ByProtocol, > + &gPcf8563RealTimeClockLibI2cMasterProtolGuid, NULL, > + &BufferSize, &mI2cMasterHandle); > + ASSERT_EFI_ERROR (Status); > + > + // > + // Register a protocol registration notification callback on the driver > + // binding protocol so we can attempt to connect our I2C master to it > + // as soon as it appears. > + // > + EfiCreateProtocolNotifyEvent ( > + &gEfiDriverBindingProtocolGuid, > + TPL_CALLBACK, > + DriverRegistrationEvent, > + NULL, > + &mDriverEventRegistration); > + > + // > + // Register for the virtual address change event > + // > + Status = gBS->CreateEventEx (EVT_NOTIFY_SIGNAL, TPL_NOTIFY, > + LibRtcVirtualNotifyEvent, NULL, > + &gEfiEventVirtualAddressChangeGuid, > + &mRtcVirtualAddrChangeEvent); > + ASSERT_EFI_ERROR (Status); > + > + return EFI_SUCCESS; > +} > diff --git > a/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.dec > b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.dec > new file mode 100644 > index 000000000000..3fefa64eefdf > --- /dev/null > +++ b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.dec > @@ -0,0 +1,29 @@ > +#/** @file > +# > +# Copyright (c) 2017, Linaro, Ltd. All rights reserved.<BR> > +# > +# This program and the accompanying materials > +# are licensed and made available under the terms and conditions of the BSD > License > +# which accompanies this distribution. The full text of the license may be > found at > +# http://opensource.org/licenses/bsd-license.php > +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR > IMPLIED. > +# > +# > +#**/ > + > +[Defines] > + DEC_SPECIFICATION = 0x0001001A > + PACKAGE_NAME = Pcf8563RealTimeClockLib > + PACKAGE_GUID = 44d63668-c86b-446a-b303-f3a5176702aa > + PACKAGE_VERSION = 0.1 > + > +[Guids] > + gPcf8563RealTimeClockLibTokenSpaceGuid = { 0xaaf5b169, 0x93a0, 0x4d60, { > 0xba, 0xe4, 0x06, 0x07, 0x92, 0x8e, 0x63, 0xdd }} > + > +[Protocols] > + gPcf8563RealTimeClockLibI2cMasterProtolGuid = { 0xa6af18ae, 0x3bd5, > 0x4af9, { 0xbb, 0x6a, 0xdb, 0x85, 0x07, 0x62, 0x81, 0x38 }} > + > +[PcdsFixedAtBuild] > + > gPcf8563RealTimeClockLibTokenSpaceGuid.PcdI2cSlaveAddress|0x51|UINT8|0x00000001 > + > gPcf8563RealTimeClockLibTokenSpaceGuid.PcdI2cBusFrequency|400000|UINT32|0x00000002 Could we have a unit comment for the frequency here? > diff --git > a/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.inf > b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.inf > new file mode 100644 > index 000000000000..e1e001162144 > --- /dev/null > +++ b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.inf > @@ -0,0 +1,52 @@ > +#/** @file > +# > +# Copyright (c) 2017, Linaro, Ltd. All rights reserved.<BR> > +# > +# This program and the accompanying materials > +# are licensed and made available under the terms and conditions of the BSD > License > +# which accompanies this distribution. The full text of the license may be > found at > +# http://opensource.org/licenses/bsd-license.php > +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR > IMPLIED. > +# > +# > +#**/ > + > +[Defines] > + INF_VERSION = 0x0001001A > + BASE_NAME = Pcf8563RealTimeClockLib > + FILE_GUID = 1e3d33f3-a671-4116-bd81-6b435296c1e0 > + MODULE_TYPE = DXE_DRIVER > + VERSION_STRING = 1.0 > + LIBRARY_CLASS = RealTimeClockLib > + > +[Sources.common] > + Pcf8563RealTimeClockLib.c > + > +[Packages] > + MdePkg/MdePkg.dec > + EmbeddedPkg/EmbeddedPkg.dec Flip above two lines? If you can fold in the three minor comments above: Reviewed-by: Leif Lindholm <leif.lindh...@linaro.org> > + Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.dec > + > +[LibraryClasses] > + BaseMemoryLib > + DebugLib > + IoLib > + UefiBootServicesTableLib > + UefiLib > + UefiRuntimeLib > + > +[Guids] > + gEfiEventVirtualAddressChangeGuid > + > +[Protocols] > + gEfiDriverBindingProtocolGuid ## CONSUMES > + gEfiI2cMasterProtocolGuid ## CONSUMES > + gPcf8563RealTimeClockLibI2cMasterProtolGuid ## CONSUMES > + > +[FixedPcd] > + gPcf8563RealTimeClockLibTokenSpaceGuid.PcdI2cSlaveAddress > + gPcf8563RealTimeClockLibTokenSpaceGuid.PcdI2cBusFrequency > + > +[Depex] > + gPcf8563RealTimeClockLibI2cMasterProtolGuid > -- > 2.11.0 > _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel