From: Vabhav <[email protected]>

Library to provide functions for NXP pcf2129 real time clock library

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Vabhav <[email protected]>
---
 Silicon/NXP/Library/Pcf2129RtcLib/Pcf2129Rtc.h     |  43 +++
 Silicon/NXP/Library/Pcf2129RtcLib/Pcf2129RtcLib.c  | 330 +++++++++++++++++++++
 .../NXP/Library/Pcf2129RtcLib/Pcf2129RtcLib.inf    |  47 +++
 3 files changed, 420 insertions(+)
 create mode 100644 Silicon/NXP/Library/Pcf2129RtcLib/Pcf2129Rtc.h
 create mode 100644 Silicon/NXP/Library/Pcf2129RtcLib/Pcf2129RtcLib.c
 create mode 100644 Silicon/NXP/Library/Pcf2129RtcLib/Pcf2129RtcLib.inf

diff --git a/Silicon/NXP/Library/Pcf2129RtcLib/Pcf2129Rtc.h 
b/Silicon/NXP/Library/Pcf2129RtcLib/Pcf2129Rtc.h
new file mode 100644
index 0000000..735f697
--- /dev/null
+++ b/Silicon/NXP/Library/Pcf2129RtcLib/Pcf2129Rtc.h
@@ -0,0 +1,43 @@
+/** Pcf2129Rtc.h
+*
+*  Copyright 2017 NXP
+*
+*  This program and the accompanying materials
+*  are licensed and made available under the terms and conditions of the BSD 
License
+*  which accompanies this distribution.  The full text of the license may be 
found at
+*  http://opensource.org/licenses/bsd-license.php
+*
+*  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+*  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR 
IMPLIED.
+*
+**/
+
+#ifndef __PCF2129RTC_H__
+#define __PCF2129RTC_H__
+
+/*
+ * RTC register addresses
+ */
+#define PCF2129_CTRL1_REG_ADDR      0x00  // Control Register 1
+#define PCF2129_CTRL2_REG_ADDR      0x01  // Control Register 2
+#define PCF2129_CTRL3_REG_ADDR      0x02  // Control Register 3
+#define PCF2129_SEC_REG_ADDR        0x03
+#define PCF2129_MIN_REG_ADDR        0x04
+#define PCF2129_HR_REG_ADDR         0x05
+#define PCF2129_DAY_REG_ADDR        0x06
+#define PCF2129_WEEKDAY_REG_ADDR    0x07
+#define PCF2129_MON_REG_ADDR        0x08
+#define PCF2129_YR_REG_ADDR         0x09
+
+#define PCF2129_CTRL3_BIT_BLF       BIT2    /* Battery Low Flag*/
+
+// Define EPOCH (1998-JANUARY-01) in the Julian Date representation
+#define EPOCH_JULIAN_DATE           2450815
+
+typedef struct {
+  UINTN                           OperationCount;
+  EFI_I2C_OPERATION               SetAddressOp;
+  EFI_I2C_OPERATION               GetSetDateTimeOp;
+} RTC_I2C_REQUEST;
+
+#endif // __PCF2129RTC_H__
diff --git a/Silicon/NXP/Library/Pcf2129RtcLib/Pcf2129RtcLib.c 
b/Silicon/NXP/Library/Pcf2129RtcLib/Pcf2129RtcLib.c
new file mode 100644
index 0000000..2e21014
--- /dev/null
+++ b/Silicon/NXP/Library/Pcf2129RtcLib/Pcf2129RtcLib.c
@@ -0,0 +1,330 @@
+/** @PCF2129RtcLib.c
+  Implement EFI RealTimeClock with runtime services via RTC Lib for PCF2129 
RTC.
+
+  Based on RTC implementation available in
+  EmbeddedPkg/Library/TemplateRealTimeClockLib/RealTimeClockLib.c
+
+  Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
+  Copyright 2017 NXP
+
+  This program and the accompanying materials
+  are licensed and made available under the terms and conditions of the BSD 
License
+  which accompanies this distribution.  The full text of the license may be 
found at
+  http://opensource.org/licenses/bsd-license.php
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <PiDxe.h>
+#include <Base.h>
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/RealTimeClockLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+#include <Protocol/I2cMaster.h>
+
+#include "Pcf2129Rtc.h"
+
+STATIC EFI_I2C_MASTER_PROTOCOL    *mI2cMaster;
+
+/**
+  returns Day of the week [0-6] 0=Sunday
+  Don't try to provide a Year that's before 1998, please !
+ **/
+UINTN
+EfiTimeToWday (
+  IN  EFI_TIME  *Time
+  )
+{
+  UINTN MonthDiff;
+  UINTN Year;
+  UINTN Month;
+  UINTN JulianDate;  // Absolute Julian Date representation of the supplied 
Time
+  UINTN EpochDays;   // Number of days elapsed since EPOCH_JULIAN_DAY
+
+  MonthDiff = (14 - Time->Month) / 12 ;
+  Year = Time->Year + 4800 - MonthDiff;
+  Month = Time->Month + (12*MonthDiff) - 3;
+
+  JulianDate = Time->Day + ((153*Month + 2)/5) + (365*Year) + (Year/4) - 
(Year/100) + (Year/400) - 32045;
+
+  ASSERT (JulianDate >= EPOCH_JULIAN_DATE);
+  EpochDays = JulianDate - EPOCH_JULIAN_DATE;
+
+   // 4=1/1/1998 was a Thursday
+
+  return (EpochDays + 4) % 7;
+}
+
+/**
+  Write RTC register.
+
+  @param  RtcRegAddr       Register offset of RTC to write.
+  @param  Val              Value to be written
+
+**/
+
+STATIC
+VOID
+RtcWrite (
+  IN  UINT8                RtcRegAddr,
+  IN  UINT8                Val
+  )
+{
+  RTC_I2C_REQUEST          Req;
+  EFI_STATUS               Status;
+
+  Req.OperationCount = 2;
+
+  Req.SetAddressOp.Flags = 0;
+  Req.SetAddressOp.LengthInBytes = 0;
+  Req.SetAddressOp.Buffer = &RtcRegAddr;
+
+  Req.GetSetDateTimeOp.Flags = 0;
+  Req.GetSetDateTimeOp.LengthInBytes = sizeof (Val);
+  Req.GetSetDateTimeOp.Buffer = &Val;
+
+  Status = mI2cMaster->StartRequest (mI2cMaster, FixedPcdGet8 
(PcdI2cSlaveAddress),
+                                     (VOID *)&Req,
+                                     NULL,  NULL);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "RTC write error at Addr:0x%x\n", RtcRegAddr));
+  }
+
+}
+
+/**
+  Returns the current time and date information, and the time-keeping 
capabilities
+  of the hardware platform.
+
+  @param  Time                  A pointer to storage to receive a snapshot of 
the current time.
+  @param  Capabilities          An optional pointer to a buffer to receive the 
real time clock
+                                device's capabilities.
+
+  @retval EFI_SUCCESS           The operation completed successfully.
+  @retval EFI_INVALID_PARAMETER Time is NULL.
+  @retval EFI_DEVICE_ERROR      The time could not be retrieved due to 
hardware error.
+
+**/
+
+EFI_STATUS
+EFIAPI
+LibGetTime (
+  OUT EFI_TIME                *Time,
+  OUT  EFI_TIME_CAPABILITIES  *Capabilities
+  )
+{
+  EFI_STATUS      Status;
+  UINT8           Buffer[10];
+  RTC_I2C_REQUEST Req;
+  UINT8           RtcRegAddr;
+
+  Status = EFI_SUCCESS;
+  RtcRegAddr = PCF2129_CTRL1_REG_ADDR;
+  Buffer[0] = 0;
+
+  if (mI2cMaster == NULL) {
+    return EFI_DEVICE_ERROR;
+  }
+
+  RtcWrite (PCF2129_CTRL1_REG_ADDR, Buffer[0]);
+
+  if (Time == NULL) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  Req.OperationCount = 2;
+
+  Req.SetAddressOp.Flags = 0;
+  Req.SetAddressOp.LengthInBytes = 0;
+  Req.SetAddressOp.Buffer = &RtcRegAddr;
+
+  Req.GetSetDateTimeOp.Flags = I2C_FLAG_READ;
+  Req.GetSetDateTimeOp.LengthInBytes = sizeof (Buffer);
+  Req.GetSetDateTimeOp.Buffer = Buffer;
+
+  Status = mI2cMaster->StartRequest (mI2cMaster, FixedPcdGet8 
(PcdI2cSlaveAddress),
+                                     (VOID *)&Req,
+                                     NULL,  NULL);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "RTC read error at Addr:0x%x\n", RtcRegAddr));
+  }
+
+  if (Buffer[PCF2129_CTRL3_REG_ADDR] & PCF2129_CTRL3_BIT_BLF) {
+    DEBUG((DEBUG_INFO, "### Warning: RTC battery status low, check/replace RTC 
battery.\n"));
+  }
+
+  Time->Nanosecond = 0;
+  Time->Second  = BcdToDecimal8 (Buffer[PCF2129_SEC_REG_ADDR] & 0x7F);
+  Time->Minute  = BcdToDecimal8 (Buffer[PCF2129_MIN_REG_ADDR] & 0x7F);
+  Time->Hour = BcdToDecimal8 (Buffer[PCF2129_HR_REG_ADDR] & 0x3F);
+  Time->Day = BcdToDecimal8 (Buffer[PCF2129_DAY_REG_ADDR] & 0x3F);
+  Time->Month  = BcdToDecimal8 (Buffer[PCF2129_MON_REG_ADDR] & 0x1F);
+  Time->Year = BcdToDecimal8 (Buffer[PCF2129_YR_REG_ADDR]) + ( BcdToDecimal8 
(Buffer[PCF2129_YR_REG_ADDR]) >= 98 ? 1900 : 2000);
+
+  return Status;
+}
+
+/**
+  Sets the current local time and date information.
+
+  @param  Time                  A pointer to the current time.
+
+  @retval EFI_SUCCESS           The operation completed successfully.
+  @retval EFI_INVALID_PARAMETER A time field is out of range.
+  @retval EFI_DEVICE_ERROR      The time could not be set due due to hardware 
error.
+
+**/
+
+EFI_STATUS
+EFIAPI
+LibSetTime (
+  IN EFI_TIME                *Time
+  )
+{
+  UINT8           Buffer[8];
+  UINT8           Index;
+  EFI_STATUS      Status;
+  RTC_I2C_REQUEST Req;
+  UINT8           RtcRegAddr;
+
+  Index = 0;
+  Status = EFI_SUCCESS;
+  RtcRegAddr = PCF2129_CTRL1_REG_ADDR;
+
+  if (mI2cMaster == NULL) {
+    return EFI_DEVICE_ERROR;
+  }
+
+  // start register address
+  Buffer[Index++] = PCF2129_SEC_REG_ADDR;
+
+  // hours, minutes and seconds
+  Buffer[Index++] = DecimalToBcd8 (Time->Second);
+  Buffer[Index++] = DecimalToBcd8 (Time->Minute);
+  Buffer[Index++] = DecimalToBcd8 (Time->Hour);
+  Buffer[Index++] = DecimalToBcd8 (Time->Day);
+  Buffer[Index++] = EfiTimeToWday (Time) & 0x07;
+  Buffer[Index++] = DecimalToBcd8 (Time->Month);
+  Buffer[Index++] = DecimalToBcd8 (Time->Year % 100);
+
+  Req.OperationCount = 2;
+  Req.SetAddressOp.Flags = 0;
+  Req.SetAddressOp.LengthInBytes = 0;
+  Req.SetAddressOp.Buffer = &RtcRegAddr;
+
+  Req.GetSetDateTimeOp.Flags = 0;
+  Req.GetSetDateTimeOp.LengthInBytes = sizeof (Buffer);
+  Req.GetSetDateTimeOp.Buffer = Buffer;
+
+  Status = mI2cMaster->StartRequest (mI2cMaster, FixedPcdGet8 
(PcdI2cSlaveAddress),
+                                     (VOID *)&Req,
+                                     NULL,  NULL);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "RTC write error at Addr:0x%x\n", RtcRegAddr));
+    return Status;
+  }
+
+  return Status;
+}
+
+
+/**
+  Returns the current wakeup alarm clock setting.
+
+  @param  Enabled               Indicates if the alarm is currently enabled or 
disabled.
+  @param  Pending               Indicates if the alarm signal is pending and 
requires acknowledgement.
+  @param  Time                  The current alarm setting.
+
+  @retval EFI_SUCCESS           The alarm settings were returned.
+  @retval EFI_INVALID_PARAMETER Any parameter is NULL.
+  @retval EFI_DEVICE_ERROR      The wakeup time could not be retrieved due to 
a hardware error.
+  @retval EFI_UNSUPPORTED       A wakeup timer is not supported on this 
platform.
+
+**/
+EFI_STATUS
+EFIAPI
+LibGetWakeupTime (
+  OUT BOOLEAN     *Enabled,
+  OUT BOOLEAN     *Pending,
+  OUT EFI_TIME    *Time
+  )
+{
+  // Not a required feature
+  return EFI_UNSUPPORTED;
+}
+
+
+/**
+  Sets the system wakeup alarm clock time.
+
+  @param  Enabled               Enable or disable the wakeup alarm.
+  @param  Time                  If Enable is TRUE, the time to set the wakeup 
alarm for.
+
+  @retval EFI_SUCCESS           If Enable is TRUE, then the wakeup alarm was 
enabled. If
+                                Enable is FALSE, then the wakeup alarm was 
disabled.
+  @retval EFI_INVALID_PARAMETER A time field is out of range.
+  @retval EFI_DEVICE_ERROR      The wakeup time could not be set due to a 
hardware error.
+  @retval EFI_UNSUPPORTED       A wakeup timer is not supported on this 
platform.
+
+**/
+EFI_STATUS
+EFIAPI
+LibSetWakeupTime (
+  IN BOOLEAN      Enabled,
+  OUT EFI_TIME    *Time
+  )
+{
+  // Not a required feature
+  return EFI_UNSUPPORTED;
+}
+
+/**
+  This is the declaration of an EFI image entry point. This can be the entry 
point to an application
+  written to this specification, an EFI boot service driver, or an EFI runtime 
driver.
+
+  @param  ImageHandle           Handle that identifies the loaded image.
+  @param  SystemTable           System Table for this image.
+
+  @retval EFI_SUCCESS           The operation completed successfully.
+  @retval EFI_DEVICE_ERROR      The operation could not be started.
+
+**/
+EFI_STATUS
+EFIAPI
+LibRtcInitialize (
+  IN EFI_HANDLE                            ImageHandle,
+  IN EFI_SYSTEM_TABLE                      *SystemTable
+  )
+{
+
+  EFI_STATUS                    Status;
+  EFI_I2C_MASTER_PROTOCOL       *I2cMaster;
+  UINTN                         BusFrequency;
+
+  Status = gBS->LocateProtocol (&gEfiI2cMasterProtocolGuid, NULL, (VOID 
**)&I2cMaster);
+
+  ASSERT_EFI_ERROR (Status);
+
+  Status = I2cMaster->Reset (I2cMaster);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "%a: I2CMaster->Reset () failed - %r\n",
+      __FUNCTION__, Status));
+    return Status;
+  }
+
+  BusFrequency = FixedPcdGet32 (PcdI2cSpeed);
+  Status = I2cMaster->SetBusFrequency (I2cMaster, &BusFrequency);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "%a: I2CMaster->SetBusFrequency () failed - %r\n",
+      __FUNCTION__, Status));
+    return Status;
+  }
+
+  mI2cMaster = I2cMaster;
+
+  return EFI_SUCCESS;
+}
diff --git a/Silicon/NXP/Library/Pcf2129RtcLib/Pcf2129RtcLib.inf 
b/Silicon/NXP/Library/Pcf2129RtcLib/Pcf2129RtcLib.inf
new file mode 100644
index 0000000..873bcea
--- /dev/null
+++ b/Silicon/NXP/Library/Pcf2129RtcLib/Pcf2129RtcLib.inf
@@ -0,0 +1,47 @@
+#/** @Pcf2129RtcLib.inf
+#
+#  Copyright 2017 NXP
+#
+#  This program and the accompanying materials
+#  are licensed and made available under the terms and conditions of the BSD 
License
+#  which accompanies this distribution. The full text of the license may be 
found at
+#  http://opensource.org/licenses/bsd-license.php
+#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR 
IMPLIED.
+#
+#
+#**/
+
+[Defines]
+  INF_VERSION                    = 0x0001001A
+  BASE_NAME                      = Pcf2129RtcLib
+  FILE_GUID                      = B661E02D-A90B-42AB-A5F9-CF841AAA43D9
+  MODULE_TYPE                    = BASE
+  VERSION_STRING                 = 1.0
+  LIBRARY_CLASS                  = RealTimeClockLib
+
+
+[Sources.common]
+  Pcf2129RtcLib.c
+
+[Packages]
+  EmbeddedPkg/EmbeddedPkg.dec
+  MdePkg/MdePkg.dec
+  Silicon/NXP/NxpQoriqLs.dec
+
+[LibraryClasses]
+  DebugLib
+  UefiBootServicesTableLib
+  UefiLib
+
+[Protocols]
+  gEfiDriverBindingProtocolGuid        ## CONSUMES
+  gEfiI2cMasterProtocolGuid            ## CONSUMES
+
+[Pcd]
+  gNxpQoriqLsTokenSpaceGuid.PcdI2cBus
+  gNxpQoriqLsTokenSpaceGuid.PcdI2cSpeed
+  gNxpQoriqLsTokenSpaceGuid.PcdI2cSlaveAddress
+
+[Depex]
+  gEfiI2cMasterProtocolGuid
-- 
1.9.1

_______________________________________________
edk2-devel mailing list
[email protected]
https://lists.01.org/mailman/listinfo/edk2-devel

Reply via email to