Ard, Both FixedAtBuild and PatchableInModule are safe at runtime. Should not limit to only FixedAtBuild.
It is also possible to use Dynamic and DynamicEx from a runtime driver as long as the PCD values are retrieved before ExitBootServices(). Mike > -----Original Message----- > From: edk2-devel [mailto:edk2-devel- > boun...@lists.01.org] On Behalf Of Ard Biesheuvel > Sent: Tuesday, February 20, 2018 3:05 AM > To: edk2-devel@lists.01.org > Cc: Ni, Ruiyu <ruiyu...@intel.com>; Ard Biesheuvel > <ard.biesheu...@linaro.org>; af...@apple.com; > leif.lindh...@linaro.org; Gao, Liming > <liming....@intel.com>; Kinney, Michael D > <michael.d.kin...@intel.com>; ler...@redhat.com; Zeng, > Star <star.z...@intel.com> > Subject: [edk2] [PATCH 1/3] MdePkg: introduce > DxeRuntimeDebugLibSerialPort > > Introduce a variant of BaseDebugLibSerialPort that > behaves correctly wrt > to use of the serial port after ExitBootServices(). > Also, it uses fixed > PCDs for all the parameterized values so that no calls > into PcdLib are > made at runtime. > > Contributed-under: TianoCore Contribution Agreement 1.1 > Signed-off-by: Ard Biesheuvel > <ard.biesheu...@linaro.org> > --- > MdePkg/Library/DxeRuntimeDebugLibSerialPort/DebugLib.c > | 342 ++++++++++++++++++++ > > MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDe > bugLibSerialPort.inf | 46 +++ > > MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDe > bugLibSerialPort.uni | 21 ++ > 3 files changed, 409 insertions(+) > > diff --git > a/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DebugLib.c > b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DebugLib.c > new file mode 100644 > index 000000000000..d18267d91322 > --- /dev/null > +++ > b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DebugLib.c > @@ -0,0 +1,342 @@ > +/** @file > + DXE runtime Debug library instance based on Serial > Port library. > + It uses PrintLib to send debug messages to serial > port device. > + > + NOTE: If the Serial Port library enables hardware > flow control, then a call > + to DebugPrint() or DebugAssert() may hang if writes > to the serial port are > + being blocked. This may occur if a key(s) are > pressed in a terminal emulator > + used to monitor the DEBUG() and ASSERT() messages. > + > + Copyright (c) 2006 - 2011, Intel Corporation. All > rights reserved.<BR> > + Copyright (c) 2018, Linaro, Ltd. All rights > reserved.<BR> > + > + This program and the accompanying materials > + are licensed and made available under the terms and > conditions of the BSD License > + which accompanies this distribution. The full text > of the license may be found at > + http://opensource.org/licenses/bsd-license.php. > + > + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON > AN "AS IS" BASIS, > + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, > EITHER EXPRESS OR IMPLIED. > + > +**/ > + > +#include <Base.h> > +#include <Library/DebugLib.h> > +#include <Library/DebugPrintErrorLevelLib.h> > +#include <Library/BaseLib.h> > +#include <Library/PrintLib.h> > +#include <Library/PcdLib.h> > +#include <Library/BaseMemoryLib.h> > +#include <Library/SerialPortLib.h> > + > +STATIC EFI_EVENT mEfiExitBootServicesEvent; > +STATIC BOOLEAN mEfiAtRuntime; > + > +// > +// Define the maximum debug and assert message length > that this library supports > +// > +#define MAX_DEBUG_MESSAGE_LENGTH 0x100 > + > +/** > + Set AtRuntime flag as TRUE after ExitBootServices. > + > + @param[in] Event The Event that is being > processed. > + @param[in] Context The Event Context. > + > +**/ > +STATIC > +VOID > +EFIAPI > +RuntimeLibExitBootServicesEvent ( > + IN EFI_EVENT Event, > + IN VOID *Context > + ) > +{ > + mEfiAtRuntime = TRUE; > +} > + > +/** > + The constructor function initialize the Serial Port > Library > + > + @retval EFI_SUCCESS The constructor always returns > RETURN_SUCCESS. > + > +**/ > +EFI_STATUS > +EFIAPI > +DxeRuntimeDebugLibSerialPortConstructor ( > + IN EFI_HANDLE ImageHandle, > + IN EFI_SYSTEM_TABLE *SystemTable > + ) > +{ > + EFI_STATUS Status; > + > + Status = SerialPortInitialize (); > + if (EFI_ERROR (Status)) { > + return Status; > + } > + > + return SystemTable->BootServices->CreateEventEx ( > + > EVT_NOTIFY_SIGNAL, > + TPL_NOTIFY, > + > RuntimeLibExitBootServicesEvent, > + NULL, > + > &gEfiEventExitBootServicesGuid, > + > &mEfiExitBootServicesEvent); > +} > + > +/** > + Prints a debug message to the debug output device if > the specified error level > + is enabled. > + > + If any bit in ErrorLevel is also set in > DebugPrintErrorLevelLib function > + GetDebugPrintErrorLevel (), then print the message > specified by Format and the > + associated variable argument list to the debug output > device. > + > + If Format is NULL, then ASSERT(). > + > + @param ErrorLevel The error level of the debug > message. > + @param Format Format string for the debug > message to print. > + @param ... Variable argument list whose > contents are accessed > + based on the format string > specified by Format. > + > +**/ > +VOID > +EFIAPI > +DebugPrint ( > + IN UINTN ErrorLevel, > + IN CONST CHAR8 *Format, > + ... > + ) > +{ > + CHAR8 Buffer[MAX_DEBUG_MESSAGE_LENGTH]; > + VA_LIST Marker; > + > + if (mEfiAtRuntime) { > + return; > + } > + > + // > + // Check driver debug mask value and global mask > + // > + if ((ErrorLevel & GetDebugPrintErrorLevel ()) == 0) { > + return; > + } > + > + // > + // Convert the DEBUG() message to an ASCII String > + // > + VA_START (Marker, Format); > + AsciiVSPrint (Buffer, sizeof (Buffer), Format, > Marker); > + VA_END (Marker); > + > + // > + // Send the print string to a Serial Port > + // > + SerialPortWrite ((UINT8 *)Buffer, AsciiStrLen > (Buffer)); > +} > + > + > +/** > + Prints an assert message containing a filename, line > number, and description. > + This may be followed by a breakpoint or a dead loop. > + > + Print a message of the form "ASSERT > <FileName>(<LineNumber>): <Description>\n" > + to the debug output device. If > DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED bit > + of PcdDebugProperyMask is set then CpuBreakpoint() is > called. Otherwise, if > + DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of > PcdDebugProperyMask is set then > + CpuDeadLoop() is called. If neither of these bits > are set, then this function > + returns immediately after the message is printed to > the debug output device. > + DebugAssert() must actively prevent recursion. If > DebugAssert() is called > + while processing another DebugAssert(), then > DebugAssert() must return > + immediately. > + > + If FileName is NULL, then a <FileName> string of > "(NULL) Filename" is printed. > + If Description is NULL, then a <Description> string > of "(NULL) Description" is > + printed. > + > + @param FileName The pointer to the name of the > source file that generated > + the assert condition. > + @param LineNumber The line number in the source > file that generated the > + assert condition > + @param Description The pointer to the description > of the assert condition. > + > +**/ > +VOID > +EFIAPI > +DebugAssert ( > + IN CONST CHAR8 *FileName, > + IN UINTN LineNumber, > + IN CONST CHAR8 *Description > + ) > +{ > + CHAR8 Buffer[MAX_DEBUG_MESSAGE_LENGTH]; > + > + if (!mEfiAtRuntime) { > + // > + // Generate the ASSERT() message in Ascii format > + // > + AsciiSPrint (Buffer, sizeof (Buffer), "ASSERT [%a] > %a(%d): %a\n", > + gEfiCallerBaseName, FileName, LineNumber, > Description); > + > + // > + // Send the print string to the Console Output > device > + // > + SerialPortWrite ((UINT8 *)Buffer, AsciiStrLen > (Buffer)); > + } > + > + // > + // Generate a Breakpoint, DeadLoop, or NOP based on > PCD settings > + // > + if ((FixedPcdGet8 (PcdDebugPropertyMask) & > + DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED) != 0) > { > + CpuBreakpoint (); > + } else if ((FixedPcdGet8 (PcdDebugPropertyMask) & > + DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED) > != 0) { > + CpuDeadLoop (); > + } > +} > + > + > +/** > + Fills a target buffer with PcdDebugClearMemoryValue, > and returns the target > + buffer. > + > + This function fills Length bytes of Buffer with the > value specified by > + PcdDebugClearMemoryValue, and returns Buffer. > + > + If Buffer is NULL, then ASSERT(). > + If Length is greater than (MAX_ADDRESS - Buffer + 1), > then ASSERT(). > + > + @param Buffer The pointer to the target buffer to > be filled with > + PcdDebugClearMemoryValue. > + @param Length The number of bytes in Buffer to > fill with > + PcdDebugClearMemoryValue. > + > + @return Buffer The pointer to the target buffer > filled with > + PcdDebugClearMemoryValue. > + > +**/ > +VOID * > +EFIAPI > +DebugClearMemory ( > + OUT VOID *Buffer, > + IN UINTN Length > + ) > +{ > + // > + // SetMem() checks for the the ASSERT() condition on > Length and returns Buffer > + // > + return SetMem (Buffer, Length, FixedPcdGet8 > (PcdDebugClearMemoryValue)); > +} > + > + > +/** > + Returns TRUE if ASSERT() macros are enabled. > + > + This function returns TRUE if the > DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of > + PcdDebugProperyMask is set. Otherwise FALSE is > returned. > + > + @retval TRUE The > DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of > + PcdDebugProperyMask is set. > + @retval FALSE The > DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of > + PcdDebugProperyMask is clear. > + > +**/ > +BOOLEAN > +EFIAPI > +DebugAssertEnabled ( > + VOID > + ) > +{ > + return (FixedPcdGet8 (PcdDebugPropertyMask) & > + DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED) != 0; > +} > + > + > +/** > + Returns TRUE if DEBUG() macros are enabled. > + > + This function returns TRUE if the > DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of > + PcdDebugProperyMask is set. Otherwise FALSE is > returned. > + > + @retval TRUE The > DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of > + PcdDebugProperyMask is set. > + @retval FALSE The > DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of > + PcdDebugProperyMask is clear. > + > +**/ > +BOOLEAN > +EFIAPI > +DebugPrintEnabled ( > + VOID > + ) > +{ > + return (FixedPcdGet8 (PcdDebugPropertyMask) & > + DEBUG_PROPERTY_DEBUG_PRINT_ENABLED) != 0; > +} > + > + > +/** > + Returns TRUE if DEBUG_CODE() macros are enabled. > + > + This function returns TRUE if the > DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of > + PcdDebugProperyMask is set. Otherwise FALSE is > returned. > + > + @retval TRUE The > DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of > + PcdDebugProperyMask is set. > + @retval FALSE The > DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of > + PcdDebugProperyMask is clear. > + > +**/ > +BOOLEAN > +EFIAPI > +DebugCodeEnabled ( > + VOID > + ) > +{ > + return (FixedPcdGet8 (PcdDebugPropertyMask) & > + DEBUG_PROPERTY_DEBUG_CODE_ENABLED) != 0; > +} > + > + > +/** > + Returns TRUE if DEBUG_CLEAR_MEMORY() macro is > enabled. > + > + This function returns TRUE if the > DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of > + PcdDebugProperyMask is set. Otherwise FALSE is > returned. > + > + @retval TRUE The > DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of > + PcdDebugProperyMask is set. > + @retval FALSE The > DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of > + PcdDebugProperyMask is clear. > + > +**/ > +BOOLEAN > +EFIAPI > +DebugClearMemoryEnabled ( > + VOID > + ) > +{ > + return (FixedPcdGet8 (PcdDebugPropertyMask) & > + DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED) != 0; > +} > + > +/** > + Returns TRUE if any one of the bit is set both in > ErrorLevel and > + PcdFixedDebugPrintErrorLevel. > + > + This function compares the bit mask of ErrorLevel and > + PcdFixedDebugPrintErrorLevel. > + > + @retval TRUE Current ErrorLevel is supported. > + @retval FALSE Current ErrorLevel is not supported. > + > +**/ > +BOOLEAN > +EFIAPI > +DebugPrintLevelEnabled ( > + IN CONST UINTN ErrorLevel > + ) > +{ > + return (ErrorLevel & FixedPcdGet32 > (PcdFixedDebugPrintErrorLevel)) != 0; > +} > diff --git > a/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntime > DebugLibSerialPort.inf > b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntime > DebugLibSerialPort.inf > new file mode 100644 > index 000000000000..9f300f4f1b12 > --- /dev/null > +++ > b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntime > DebugLibSerialPort.inf > @@ -0,0 +1,46 @@ > +## @file > +# > +# Copyright (c) 2006 - 2015, Intel Corporation. All > rights reserved.<BR> > +# Copyright (c) 2018, Linaro, Ltd. All rights > reserved.<BR> > +# > +# This program and the accompanying materials > +# are licensed and made available under the terms and > conditions of the BSD License > +# which accompanies this distribution. The full text > of the license may be found at > +# http://opensource.org/licenses/bsd-license.php. > +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON > AN "AS IS" BASIS, > +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, > EITHER EXPRESS OR IMPLIED. > +# > +# > +## > + > +[Defines] > + INF_VERSION = 0x00010005 > + BASE_NAME = > DxeRuntimeDebugLibSerialPort > + MODULE_UNI_FILE = > DxeRuntimeDebugLibSerialPort.uni > + FILE_GUID = 9D914E2F-7CCB-41DB- > 8E74-9AFF8F3BBFBF > + MODULE_TYPE = DXE_RUNTIME_DRIVER > + VERSION_STRING = 1.0 > + LIBRARY_CLASS = DebugLib > + CONSTRUCTOR = > DxeRuntimeDebugLibSerialPortConstructor > + > +[Sources] > + DebugLib.c > + > +[Packages] > + MdePkg/MdePkg.dec > + > +[LibraryClasses] > + BaseLib > + BaseMemoryLib > + DebugPrintErrorLevelLib > + PcdLib > + PrintLib > + SerialPortLib > + > +[Guids] > + gEfiEventExitBootServicesGuid > + > +[FixedPcd] > + gEfiMdePkgTokenSpaceGuid.PcdDebugClearMemoryValue > ## SOMETIMES_CONSUMES > + gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask > ## CONSUMES > + gEfiMdePkgTokenSpaceGuid.PcdFixedDebugPrintErrorLevel > ## CONSUMES > diff --git > a/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntime > DebugLibSerialPort.uni > b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntime > DebugLibSerialPort.uni > new file mode 100644 > index 000000000000..cd65515c4177 > --- /dev/null > +++ > b/MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntime > DebugLibSerialPort.uni > @@ -0,0 +1,21 @@ > +// /** @file > +// Instance of Debug Library based on Serial Port > Library. > +// > +// It uses Print Library to produce formatted output > strings to seiral port device. > +// > +// Copyright (c) 2006 - 2014, Intel Corporation. All > rights reserved.<BR> > +// > +// This program and the accompanying materials > +// are licensed and made available under the terms and > conditions of the BSD License > +// which accompanies this distribution. The full text > of the license may be found at > +// http://opensource.org/licenses/bsd-license.php. > +// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON > AN "AS IS" BASIS, > +// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, > EITHER EXPRESS OR IMPLIED. > +// > +// **/ > + > + > +#string STR_MODULE_ABSTRACT #language en-US > "Instance of Debug Library based on Serial Port Library" > + > +#string STR_MODULE_DESCRIPTION #language en-US > "It uses Print Library to produce formatted output > strings to a serial port device." > + > -- > 2.11.0 > > _______________________________________________ > edk2-devel mailing list > edk2-devel@lists.01.org > https://lists.01.org/mailman/listinfo/edk2-devel _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel