When a USB device reports failure for a CMD and REQUEST SENSE returns
Media Changed key, UsbBootExecCmdWithRetry() stops to retry CMD and
returns EFI_MEDIA_CHANGED to caller.
For this case, the CMD should be retried until success, getting
NoMedia sense key or timeout.
The patch updates UsbBootExecCmdWithRetry() to follow the above
rule so EFI_MEDIA_CHANGED is no longer returned.
UsbBootDetectMedia() is updated accordingly.
Because UsbBootGetParams() is called for new plugged USB storage,
and some USB storage devices may report Media Changed key,
UsbBootGetParams() is updated to treat it as a Success.
This change could fix the issue that some USB storage devices
cannot be detected.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu...@intel.com>
Cc: Star Zeng <star.z...@intel.com>
---
.../Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c | 60 ++++++++++++++--------
.../Bus/Usb/UsbMassStorageDxe/UsbMassImpl.c | 10 +++-
2 files changed, 48 insertions(+), 22 deletions(-)
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c
b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c
index dd4b3a5f0a..b84bfd2d72 100644
--- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c
+++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c
@@ -234,7 +234,7 @@ UsbBootExecCmd (
@param Timeout The timeout used to transfer
@retval EFI_SUCCESS The command is executed successfully.
- @retval EFI_MEDIA_CHANGED The device media has been changed.
+ @retval EFI_NO_MEDIA The device media is removed.
@retval Others Command execution failed after retrial.
**/
@@ -284,7 +284,7 @@ UsbBootExecCmdWithRetry (
DataLen,
Timeout
);
- if (Status == EFI_SUCCESS || Status == EFI_MEDIA_CHANGED || Status ==
EFI_NO_MEDIA) {
+ if (Status == EFI_SUCCESS || Status == EFI_NO_MEDIA) {
break;
}
//
@@ -700,30 +700,42 @@ UsbBootDetectMedia (
CmdSet = ((EFI_USB_INTERFACE_DESCRIPTOR *)
(UsbMass->Context))->InterfaceSubClass;
Status = UsbBootIsUnitReady (UsbMass);
- if (EFI_ERROR (Status) && (Status != EFI_MEDIA_CHANGED)) {
- goto ON_ERROR;
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "UsbBootDetectMedia: UsbBootIsUnitReady (%r)\n",
Status));
}
- if ((UsbMass->Pdt != USB_PDT_CDROM) && (CmdSet == USB_MASS_STORE_SCSI)) {
- //
- // MODE SENSE is required for the device with PDT of 0x00/0x07/0x0E,
- // according to Section 4 of USB Mass Storage Specification for
Bootability.
- // MODE SENSE(10) is useless here, while MODE SENSE(6) defined in SCSI
- // could get the information of Write Protected.
- // Since not all device support this command, skip if fail.
- //
- UsbScsiModeSense (UsbMass);
- }
+ //
+ // Status could be:
+ // EFI_SUCCESS: all good.
+ // EFI_NO_MEDIA: media is not present.
+ // others: HW error.
+ // For either EFI_NO_MEDIA, or HW error, skip to get WriteProtected and
capacity information.
+ //
+ if (!EFI_ERROR (Status)) {
+ if ((UsbMass->Pdt != USB_PDT_CDROM) && (CmdSet == USB_MASS_STORE_SCSI)) {
+ //
+ // MODE SENSE is required for the device with PDT of 0x00/0x07/0x0E,
+ // according to Section 4 of USB Mass Storage Specification for
Bootability.
+ // MODE SENSE(10) is useless here, while MODE SENSE(6) defined in SCSI
+ // could get the information of Write Protected.
+ // Since not all device support this command, skip if fail.
+ //
+ UsbScsiModeSense (UsbMass);
+ }
- Status = UsbBootReadCapacity (UsbMass);
- if (EFI_ERROR (Status)) {
- DEBUG ((EFI_D_ERROR, "UsbBootDetectMedia: UsbBootReadCapacity (%r)\n",
Status));
- goto ON_ERROR;
+ Status = UsbBootReadCapacity (UsbMass);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "UsbBootDetectMedia: UsbBootReadCapacity (%r)\n",
Status));
+ }
}
- return EFI_SUCCESS;
+ if (EFI_ERROR (Status) && Status != EFI_NO_MEDIA) {
+ //
+ // For NoMedia, BlockIo is still needed.
+ //
+ return Status;
+ }
-ON_ERROR:
//
// Detect whether it is necessary to reinstall the Block I/O Protocol.
//
@@ -744,6 +756,10 @@ ON_ERROR:
// DriverBindingStart(), which raises to TPL_CALLBACK.
ASSERT (EfiGetCurrentTpl () == TPL_CALLBACK);
+ //
+ // When it is called from DriverBindingStart(), below reinstall fails.
+ // So ignore the return status check.
+ //
gBS->ReinstallProtocolInterface (
UsbMass->Controller,
&gEfiBlockIoProtocolGuid,
@@ -752,7 +768,7 @@ ON_ERROR:
);
//
- // Update MediaId after reinstalling Block I/O Protocol.
+ // Reset MediaId after reinstalling Block I/O Protocol.
//
if (Media->MediaPresent != OldMedia.MediaPresent) {
if (Media->MediaPresent) {
@@ -767,6 +783,8 @@ ON_ERROR:
(Media->LastBlock != OldMedia.LastBlock)) {
Media->MediaId++;
}
+
+ Status = Media->MediaPresent ? EFI_MEDIA_CHANGED : EFI_NO_MEDIA;
}
return Status;
diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.c
b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.c
index 9d1bb25fb3..bb292ed3eb 100644
--- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.c
+++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassImpl.c
@@ -1,7 +1,7 @@
/** @file
USB Mass Storage Driver that manages USB Mass Storage Device and produces
Block I/O Protocol.
-Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD
License
which accompanies this distribution. The full text of the license may be
found at
@@ -361,6 +361,14 @@ UsbMassInitMedia (
Media->MediaId = 1;
Status = UsbBootGetParams (UsbMass);
+ DEBUG ((DEBUG_INFO, "UsbMassInitMedia: UsbBootGetParams (%r)\n", Status));
+ if (Status == EFI_MEDIA_CHANGED) {
+ //
+ // Some USB storage devices may report MEDIA_CHANGED sense key when
hot-plugged.
+ // Treat it as SUCCESS
+ //
+ Status = EFI_SUCCESS;
+ }
return Status;
}
--
2.16.1.windows.1
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
