On Tue, Mar 20, 2018 at 04:12:10PM +0000, Girish Pathak wrote:
> From: Girish Pathak <girish.pathak at arm.com>
>
> This change adds support for the ARM Mali DP500/DP500/DP650 display
> processors using the GOP protocol. It has been tested on FVP base
> models + DP550 support. This change adds platform independant LcdHwLib
> library. A corresponding platform specific library will be submitted
> to edk-platforms/Platform/ARM/VExpressPkg.
>
> This change does not modify functionality provided by PL111 or
> HDLCD. This LcdHwLib implementation should be suitable for those
> platforms that implement ARM Mali DP500/DP550/DP650 replacing
> PL111/HDLCD.
>
> Only graphics layer of the ARM Mali DP is configured for rendering
> the RGB/BGR format frame buffer to satisfy the UEFI GOP requirements
> Other layers e.g. video layers are not configured.
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Girish Pathak <girish.pat...@arm.com>
> Signed-off-by: Evan Lloyd <evan.ll...@arm.com>
> ---
>
> Notes:
> v3:
> - Please add this library as a component to
> ArmPlatformPkg.dsc as well, so we can do build testing
> on it. [Ard]
>
> Done [Girish]
>
> - Please drop references to edk2-platforms.
> This driver should be able to be used independently
> from VExpress platform code [Ard]
>
> Done [Girish]
>
> ArmPlatformPkg/ArmPlatformPkg.dec | 4 +
> ArmPlatformPkg/ArmPlatformPkg.dsc | 4 +-
> ArmPlatformPkg/Library/ArmMaliDp/ArmMaliDp.c | 409 ++++++++++++++++++++
> ArmPlatformPkg/Library/ArmMaliDp/ArmMaliDp.h | 243 ++++++++++++
> ArmPlatformPkg/Library/ArmMaliDp/ArmMaliDp.inf | 43 ++
> 5 files changed, 702 insertions(+), 1 deletion(-)
>
> diff --git a/ArmPlatformPkg/ArmPlatformPkg.dec
> b/ArmPlatformPkg/ArmPlatformPkg.dec
> index
> 5c702718a78a78e6c67ab407e198382e0a0df4be..28cdc259849da11b172ad52045bccc0276669852
> 100644
> --- a/ArmPlatformPkg/ArmPlatformPkg.dec
> +++ b/ArmPlatformPkg/ArmPlatformPkg.dec
> @@ -98,6 +98,10 @@ [PcdsFixedAtBuild.common]
> ## If set, framebuffer memory will be reserved and mapped in the system RAM
>
> gArmPlatformTokenSpaceGuid.PcdArmLcdDdrFrameBufferBase|0x0|UINT64|0x00000044
>
> + ## ARM Mali Display Processor DP500/DP550/DP650
> + gArmPlatformTokenSpaceGuid.PcdArmMaliDpBase|0x0|UINT64|0x00000050
> +
> gArmPlatformTokenSpaceGuid.PcdArmMaliDpMemoryRegionLength|0x0|UINT32|0x00000051
> +
> ## PL180 MCI
>
> gArmPlatformTokenSpaceGuid.PcdPL180SysMciRegAddress|0x00000000|UINT32|0x00000028
>
> gArmPlatformTokenSpaceGuid.PcdPL180MciBaseAddress|0x00000000|UINT32|0x00000029
> diff --git a/ArmPlatformPkg/ArmPlatformPkg.dsc
> b/ArmPlatformPkg/ArmPlatformPkg.dsc
> index
> 82adb9ef8891b7ba1628ede2f8eb124c25c2774a..0013106b94c371f827e01c6d402faa6aa42e4bdd
> 100644
> --- a/ArmPlatformPkg/ArmPlatformPkg.dsc
> +++ b/ArmPlatformPkg/ArmPlatformPkg.dsc
> @@ -2,7 +2,7 @@
> # ARM platform package.
> #
> # Copyright (c) 2009 - 2010, Apple Inc. All rights reserved.<BR>
> -# Copyright (c) 2011 - 2015, ARM Ltd. All rights reserved.<BR>
> +# Copyright (c) 2011 - 2018, ARM Ltd. All rights reserved.<BR>
> # Copyright (c) 2016 - 2017, Linaro Ltd. All rights reserved.<BR>
> #
> # This program and the accompanying materials
> @@ -120,3 +120,5 @@ [Components.common]
>
> ArmPlatformPkg/PrePi/PeiMPCore.inf
> ArmPlatformPkg/PrePi/PeiUniCore.inf
> +
> + ArmPlatformPkg/Library/ArmMaliDp/ArmMaliDp.inf
> diff --git a/ArmPlatformPkg/Library/ArmMaliDp/ArmMaliDp.c
> b/ArmPlatformPkg/Library/ArmMaliDp/ArmMaliDp.c
> new file mode 100644
> index
> 0000000000000000000000000000000000000000..69c88416a448caa506bf8a772432144d8a138495
> --- /dev/null
> +++ b/ArmPlatformPkg/Library/ArmMaliDp/ArmMaliDp.c
> @@ -0,0 +1,409 @@
> +/** @file
> +
> + ARM Mali DP 500/550/650 display controller driver
> +
> + Copyright (c) 2017-2018, Arm Limited. All rights reserved.<BR>
> +
> + This program and the accompanying materials
> + are licensed and made available under the terms and conditions of the BSD
> License
> + which accompanies this distribution. The full text of the license may be
> found at
> + http://opensource.org/licenses/bsd-license.php
> +
> + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR
> IMPLIED.
> +
> +**/
> +
> +#include <Library/DebugLib.h>
> +#include <Library/IoLib.h>
> +#include <Library/LcdHwLib.h>
> +#include <Library/LcdPlatformLib.h>
> +#include <Library/MemoryAllocationLib.h>
> +
> +#include "ArmMaliDp.h"
> +
> +// CORE_ID of the MALI DP
> +STATIC UINT32 mDpDeviceId;
> +
> +/** Disable the graphics layer
> +
> + This is done by clearing the EN bit of the LG_CONTROL register.
> +**/
> +STATIC
> +VOID
> +LayerGraphicsDisable (VOID)
> +{
> + MmioAnd32 (DP_BASE + DP_DE_LG_CONTROL, ~DP_DE_LG_ENABLE);
> +}
> +
> +/** Enable the graphics layer
> +
> + This is done by setting the EN bit of the LG_CONTROL register.
> +**/
> +STATIC
> +VOID
> +LayerGraphicsEnable (VOID)
> +{
> + MmioOr32 (DP_BASE + DP_DE_LG_CONTROL, DP_DE_LG_ENABLE);
> +}
> +
> +/** Set the frame address of the graphics layer.
> +
> + @param[in] FrameBaseAddress Address of the data buffer to be used as
> + a framebuffer.
> +**/
> +STATIC
> +VOID
> +LayerGraphicsSetFrame (
> + IN CONST EFI_PHYSICAL_ADDRESS FrameBaseAddress
> + )
> +{
> + // Disable the graphics layer.
> + LayerGraphicsDisable ();
> +
> + // Set up memory address of the data buffer for graphics layer.
> + // write lower bits of the address.
> + MmioWrite32 (
> + DP_BASE + DP_DE_LG_PTR_LOW,
> + DP_DE_LG_PTR_LOW_MASK & FrameBaseAddress
> + );
> +
> + // Write higher bits of the address.
> + MmioWrite32 (
> + DP_BASE + DP_DE_LG_PTR_HIGH,
> + (UINT32)(FrameBaseAddress >> DP_DE_LG_PTR_HIGH_SHIFT)
> + );
> +
> + // Enable the graphics layer.
> + LayerGraphicsEnable ();
> +}
> +
> +/** Configures various graphics layer characteristics.
> +
> + @param[in] UefiGfxPixelFormat This must be either
> + PixelBlueGreenRedReserved8BitPerColor
> + OR
> + PixelRedGreenBlueReserved8BitPerColor
> + @param[in] HRes Horizontal resolution of the graphics layer.
> + @param[in] VRes Vertical resolution of the graphics layer.
> +**/
> +STATIC
> +VOID
> +LayerGraphicsConfig (
> + IN CONST EFI_GRAPHICS_PIXEL_FORMAT UefiGfxPixelFormat,
> + IN CONST UINT32 HRes,
> + IN CONST UINT32 VRes
> + )
> +{
> + UINT32 PixelFormat;
> +
> + // Disable the graphics layer before configuring any settings.
> + LayerGraphicsDisable ();
> +
> + // Setup graphics layer size.
> + MmioWrite32 (DP_BASE + DP_DE_LG_IN_SIZE, FRAME_IN_SIZE (HRes, VRes));
> +
> + // Setup graphics layer composition size.
> + MmioWrite32 (DP_BASE + DP_DE_LG_CMP_SIZE, FRAME_CMP_SIZE (HRes, VRes));
> +
> + // Setup memory stride (total visible pixels on a line * 4).
> + MmioWrite32 (DP_BASE + DP_DE_LG_H_STRIDE, (HRes * sizeof (UINT32)));
> +
> + // Set the format.
> +
> + // In PixelBlueGreenRedReserved8BitPerColor format, byte 0 represents blue,
> + // byte 1 represents green, byte 2 represents red, and byte 3 is reserved
> + // which is equivalent to XRGB format of the DP500/DP550/DP650. Whereas
> + // PixelRedGreenBlueReserved8BitPerColor is equivalent to XBGR of the
> + // DP500/DP550/DP650.
> + if (UefiGfxPixelFormat == PixelBlueGreenRedReserved8BitPerColor) {
> + PixelFormat = (mDpDeviceId == MALIDP_500) ?
> DP_PIXEL_FORMAT_DP500_XRGB_8888
> + : DP_PIXEL_FORMAT_XRGB_8888;
> + } else {
> + PixelFormat = (mDpDeviceId == MALIDP_500) ?
> DP_PIXEL_FORMAT_DP500_XBGR_8888
> + : DP_PIXEL_FORMAT_XBGR_8888;
> + }
> +
> + MmioWrite32 (DP_BASE + DP_DE_LG_FORMAT, PixelFormat);
> +
> + // Enable graphics layer.
> + LayerGraphicsEnable ();
> +}
> +
> +/** Configure timing information of the display.
> +
> + @param[in] Horizontal Pointer to horizontal timing parameters.
> + (Resolution, Sync, Back porch, Front porch)
> + @param[in] Vertical Pointer to vertical timing parameters.
> + (Resolution, Sync, Back porch, Front porch)
> +**/
> +STATIC
> +VOID
> +SetDisplayEngineTiming (
> + IN CONST SCAN_TIMINGS * CONST Horizontal,
> + IN CONST SCAN_TIMINGS * CONST Vertical
> + )
> +{
> + UINTN RegHIntervals;
> + UINTN RegVIntervals;
> + UINTN RegSyncControl;
> + UINTN RegHVActiveSize;
> +
> + if (mDpDeviceId == MALIDP_500) {
> + // MALI DP500 timing registers.
> + RegHIntervals = DP_BASE + DP_DE_DP500_H_INTERVALS;
> + RegVIntervals = DP_BASE + DP_DE_DP500_V_INTERVALS;
> + RegSyncControl = DP_BASE + DP_DE_DP500_SYNC_CONTROL;
> + RegHVActiveSize = DP_BASE + DP_DE_DP500_HV_ACTIVESIZE;
> + } else {
> + // MALI DP550/DP650 timing registers.
> + RegHIntervals = DP_BASE + DP_DE_H_INTERVALS;
> + RegVIntervals = DP_BASE + DP_DE_V_INTERVALS;
> + RegSyncControl = DP_BASE + DP_DE_SYNC_CONTROL;
> + RegHVActiveSize = DP_BASE + DP_DE_HV_ACTIVESIZE;
> + }
> +
> + // Horizontal back porch and front porch.
> + MmioWrite32 (
> + RegHIntervals,
> + H_INTERVALS (Horizontal->FrontPorch, Horizontal->BackPorch)
> + );
> +
> + // Vertical back porch and front porch.
> + MmioWrite32 (
> + RegVIntervals,
> + V_INTERVALS (Vertical->FrontPorch, Vertical->BackPorch)
> + );
> +
> + // Sync control, Horizontal and Vertical sync.
> + MmioWrite32 (
> + RegSyncControl,
> + SYNC_WIDTH (Horizontal->Sync, Vertical->Sync)
> + );
> +
> + // Set up Horizontal and Vertical area size.
> + MmioWrite32 (
> + RegHVActiveSize,
> + HV_ACTIVE (Horizontal->Resolution, Vertical->Resolution)
> + );
> +}
> +
> +/** Return CORE_ID of the ARM Mali DP.
> +
> + @retval 0xFFF No Mali DP found.
> + @retval 0x500 Mali DP core id for DP500.
> + @retval 0x550 Mali DP core id for DP550.
> + @retval 0x650 Mali DP core id for DP650.
> +**/
> +STATIC
> +UINT32
> +ArmMaliDpGetCoreId (
> + )
> +{
> + UINT32 DpCoreId;
> +
> + // First check for DP500 as register offset for DP550/DP650 CORE_ID
> + // is beyond 3K/4K register space of the DP500.
> + DpCoreId = MmioRead32 (DP_BASE + DP_DE_DP500_CORE_ID);
> + DpCoreId >>= DP_DE_DP500_CORE_ID_SHIFT;
> +
> + if (DpCoreId == MALIDP_500) {
> + return DpCoreId;
> + }
> +
> + // Check for DP550 or DP650.
> + DpCoreId = MmioRead32 (DP_BASE + DP_DC_CORE_ID);
> + DpCoreId >>= DP_DC_CORE_ID_SHIFT;
> +
> + if ((DpCoreId == MALIDP_550) || (DpCoreId == MALIDP_650)) {
> + return DpCoreId;
> + }
> +
> + return MALIDP_NOT_PRESENT;
> +}
> +
> +/** Check for presence of MALI.
> +
> + This function returns success if the platform implements
> + DP500/DP550/DP650 ARM Mali display processor.
> +
> + @retval EFI_SUCCESS DP500/DP550/DP650 display processor found
> + on the platform.
> + @retval EFI_NOT_FOUND DP500/DP550/DP650 display processor not found
> + on the platform.
> +**/
> +EFI_STATUS
> +LcdIdentify (VOID)
> +{
> + DEBUG ((DEBUG_WARN,
> + "Probing ARM Mali DP500/DP550/DP650 at base address 0x%p\n",
> + DP_BASE
> + ));
> +
> + if (mDpDeviceId == 0) {
> + mDpDeviceId = ArmMaliDpGetCoreId ();
> + }
> +
> + if (mDpDeviceId == MALIDP_NOT_PRESENT) {
> + DEBUG ((DEBUG_WARN, "ARM Mali DP not found...\n"));
> + return EFI_NOT_FOUND;
> + }
> +
> + DEBUG ((DEBUG_WARN, "Found ARM Mali DP %x\n", mDpDeviceId));
> + return EFI_SUCCESS;
> +}
> +
> +/** Initialize platform display.
> +
> + @param[in] FrameBaseAddress Address of the frame buffer.
> +
> + @retval EFI_SUCCESS Display initialization successful.
> + @retval !(EFI_SUCCESS) Display initialization failure.
> +**/
> +EFI_STATUS
> +LcdInitialize (
> + IN CONST EFI_PHYSICAL_ADDRESS FrameBaseAddress
> + )
> +{
> + DEBUG ((DEBUG_WARN, "Framebuffer base address = %p\n", FrameBaseAddress));
> +
> + if (mDpDeviceId == 0) {
> + mDpDeviceId = ArmMaliDpGetCoreId ();
> + }
> +
> + if (mDpDeviceId == MALIDP_NOT_PRESENT) {
> + DEBUG ((DEBUG_ERROR, "ARM Mali DP initialization failed,"
> + "no ARM Mali DP present\n"));
> + return EFI_NOT_FOUND;
> + }
> +
> + // We are using graphics layer of the Mali DP as a main framebuffer.
> + LayerGraphicsSetFrame (FrameBaseAddress);
> +
> + return EFI_SUCCESS;
> +}
> +
> +/** Set ARM Mali DP in cofiguration mode.
> +
> + The ARM Mali DP must be in the configuration mode for
> + configuration of the H_INTERVALS, V_INTERVALS, SYNC_CONTROL
> + and HV_ACTIVESIZE.
> +**/
> +STATIC
> +VOID
> +SetConfigurationMode (VOID)
> +{
> + // Request configuration Mode.
Incorrect indentation (I'll fix up before pushing).
> + if (mDpDeviceId == MALIDP_500) {
> + MmioOr32 (DP_BASE + DP_DE_DP500_CONTROL, DP_DE_DP500_CONTROL_CONFIG_REQ);
> + } else {
> + MmioOr32 (DP_BASE + DP_DC_CONTROL, DP_DC_CONTROL_CM_ACTIVE);
> + }
> +}
> +
> +/** Set ARM Mali DP in normal mode.
> +
> + Normal mode is the main operating mode of the display processor
> + in which display layer data is fetched from framebuffer and
> + displayed.
> +**/
> +STATIC
> +VOID
> +SetNormalMode (VOID)
> +{
> + // Disable configuration Mode.
Incorrect indentation (I'll fix up before pushing).
/
Leif
> + if (mDpDeviceId == MALIDP_500) {
> + MmioAnd32 (DP_BASE + DP_DE_DP500_CONTROL,
> ~DP_DE_DP500_CONTROL_CONFIG_REQ);
> + } else {
> + MmioAnd32 (DP_BASE + DP_DC_CONTROL, ~DP_DC_CONTROL_CM_ACTIVE);
> + }
> +}
> +
> +/** Set the global configuration valid flag.
> +
> + Any new configuration parameters written to the display engine are not
> + activated until the global configuration valid flag is set in the
> + CONFIG_VALID register.
> +**/
> +STATIC
> +VOID
> +SetConfigValid (VOID)
> +{
> + if (mDpDeviceId == MALIDP_500) {
> + MmioOr32 (DP_BASE + DP_DP500_CONFIG_VALID, DP_DC_CONFIG_VALID);
> + } else {
> + MmioOr32 (DP_BASE + DP_DC_CONFIG_VALID, DP_DC_CONFIG_VALID);
> + }
> +}
> +
> +/** Set requested mode of the display.
> +
> + @param[in] ModeNumber Display mode number.
> +
> + @retval EFI_SUCCESS Display mode set successful.
> + @retval EFI_DEVICE_ERROR Display mode not found/supported.
> +**/
> +EFI_STATUS
> +LcdSetMode (
> + IN CONST UINT32 ModeNumber
> + )
> +{
> + EFI_STATUS Status;
> + SCAN_TIMINGS *Horizontal;
> + SCAN_TIMINGS *Vertical;
> +
> + EFI_GRAPHICS_OUTPUT_MODE_INFORMATION ModeInfo;
> +
> + // Get the display mode timings and other relevant information.
> + Status = LcdPlatformGetTimings (
> + ModeNumber,
> + &Horizontal,
> + &Vertical
> + );
> + if (EFI_ERROR (Status)) {
> + ASSERT_EFI_ERROR (Status);
> + return Status;
> + }
> +
> + ASSERT (Horizontal != NULL);
> + ASSERT (Vertical != NULL);
> +
> + // Get the pixel format information.
> + Status = LcdPlatformQueryMode (ModeNumber, &ModeInfo);
> + if (EFI_ERROR (Status)) {
> + ASSERT_EFI_ERROR (Status);
> + return Status;
> + }
> +
> + // Request configuration mode.
> + SetConfigurationMode ();
> +
> + // Configure the graphics layer.
> + LayerGraphicsConfig (
> + ModeInfo.PixelFormat,
> + Horizontal->Resolution,
> + Vertical->Resolution
> + );
> +
> + // Set the display engine timings.
> + SetDisplayEngineTiming (Horizontal, Vertical);
> +
> + // After configuration, set Mali DP in normal mode.
> + SetNormalMode ();
> +
> + // Any parameters written to the display engine are not activated until
> + // CONFIG_VALID is set.
> + SetConfigValid ();
> +
> + return EFI_SUCCESS;
> +}
> +
> +/** This function de-initializes the display.
> +
> +**/
> +VOID
> +LcdShutdown (VOID)
> +{
> + // Disable graphics layer.
> + LayerGraphicsDisable ();
> +}
> diff --git a/ArmPlatformPkg/Library/ArmMaliDp/ArmMaliDp.h
> b/ArmPlatformPkg/Library/ArmMaliDp/ArmMaliDp.h
> new file mode 100644
> index
> 0000000000000000000000000000000000000000..4504c6965bf58b1ac19cf717360c7a603ff2cd61
> --- /dev/null
> +++ b/ArmPlatformPkg/Library/ArmMaliDp/ArmMaliDp.h
> @@ -0,0 +1,243 @@
> +/** @file
> +
> + This header file contains the platform independent parts of ARM Mali DP
> +
> + Copyright (c) 2017-2018, Arm Limited. All rights reserved.<BR>
> + This program and the accompanying materials
> + are licensed and made available under the terms and conditions of the BSD
> License
> + which accompanies this distribution. The full text of the license may be
> found at
> + http://opensource.org/licenses/bsd-license.php
> +
> + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR
> IMPLIED.
> +
> +**/
> +#ifndef ARMMALIDP_H_
> +#define ARMMALIDP_H_
> +
> +#define DP_BASE (FixedPcdGet64 (PcdArmMaliDpBase))
> +
> +// MALI DP Ids
> +#define MALIDP_NOT_PRESENT 0xFFF
> +#define MALIDP_500 0x500
> +#define MALIDP_550 0x550
> +#define MALIDP_650 0x650
> +
> +// DP500 Peripheral Ids
> +#define DP500_ID_PART_0 0x00
> +#define DP500_ID_DES_0 0xB
> +#define DP500_ID_PART_1 0x5
> +
> +#define DP500_ID_REVISION 0x1
> +#define DP500_ID_JEDEC 0x1
> +#define DP500_ID_DES_1 0x3
> +
> +#define DP500_PERIPHERAL_ID0_VAL (DP500_ID_PART_0)
> +#define DP500_PERIPHERAL_ID1_VAL ((DP500_ID_DES_0 << 4) \
> + | DP500_ID_PART_1)
> +#define DP500_PERIPHERAL_ID2_VAL ((DP500_ID_REVISION << 4) \
> + | (DP500_ID_JEDEC << 3) \
> + | (DP500_ID_DES_1))
> +
> +// DP550 Peripheral Ids
> +#define DP550_ID_PART_0 0x50
> +#define DP550_ID_DES_0 0xB
> +#define DP550_ID_PART_1 0x5
> +
> +#define DP550_ID_REVISION 0x0
> +#define DP550_ID_JEDEC 0x1
> +#define DP550_ID_DES_1 0x3
> +
> +#define DP550_PERIPHERAL_ID0_VAL (DP550_ID_PART_0)
> +#define DP550_PERIPHERAL_ID1_VAL ((DP550_ID_DES_0 << 4) \
> + | DP550_ID_PART_1)
> +#define DP550_PERIPHERAL_ID2_VAL ((DP550_ID_REVISION << 4) \
> + | (DP550_ID_JEDEC << 3) \
> + | (DP550_ID_DES_1))
> +
> +// DP650 Peripheral Ids
> +#define DP650_ID_PART_0 0x50
> +#define DP650_ID_DES_0 0xB
> +#define DP650_ID_PART_1 0x6
> +
> +#define DP650_ID_REVISION 0x0
> +#define DP650_ID_JEDEC 0x1
> +#define DP650_ID_DES_1 0x3
> +
> +#define DP650_PERIPHERAL_ID0_VAL (DP650_ID_PART_0)
> +#define DP650_PERIPHERAL_ID1_VAL ((DP650_ID_DES_0 << 4) \
> + | DP650_ID_PART_1)
> +#define DP650_PERIPHERAL_ID2_VAL ((DP650_ID_REVISION << 4) \
> + | (DP650_ID_JEDEC << 3) \
> + | (DP650_ID_DES_1))
> +
> +// Display Engine (DE) control register offsets for DP550/DP650
> +#define DP_DE_STATUS 0x00000
> +#define DP_DE_IRQ_SET 0x00004
> +#define DP_DE_IRQ_MASK 0x00008
> +#define DP_DE_IRQ_CLEAR 0x0000C
> +#define DP_DE_CONTROL 0x00010
> +#define DP_DE_PROG_LINE 0x00014
> +#define DP_DE_AXI_CONTROL 0x00018
> +#define DP_DE_AXI_QOS 0x0001C
> +#define DP_DE_DISPLAY_FUNCTION 0x00020
> +
> +#define DP_DE_H_INTERVALS 0x00030
> +#define DP_DE_V_INTERVALS 0x00034
> +#define DP_DE_SYNC_CONTROL 0x00038
> +#define DP_DE_HV_ACTIVESIZE 0x0003C
> +#define DP_DE_DISPLAY_SIDEBAND 0x00040
> +#define DP_DE_BACKGROUND_COLOR 0x00044
> +#define DP_DE_DISPLAY_SPLIT 0x00048
> +#define DP_DE_OUTPUT_DEPTH 0x0004C
> +
> +// Display Engine (DE) control register offsets for DP500
> +#define DP_DE_DP500_CORE_ID 0x00018
> +#define DP_DE_DP500_CONTROL 0x0000C
> +#define DP_DE_DP500_PROG_LINE 0x00010
> +#define DP_DE_DP500_H_INTERVALS 0x00028
> +#define DP_DE_DP500_V_INTERVALS 0x0002C
> +#define DP_DE_DP500_SYNC_CONTROL 0x00030
> +#define DP_DE_DP500_HV_ACTIVESIZE 0x00034
> +#define DP_DE_DP500_BG_COLOR_RG 0x0003C
> +#define DP_DE_DP500_BG_COLOR_B 0x00040
> +
> +/* Display Engine (DE) graphics layer (LG) register offsets
> + * NOTE: For DP500 it will be LG2.
> + */
> +#define DE_LG_OFFSET 0x00300
> +#define DP_DE_LG_FORMAT (DE_LG_OFFSET)
> +#define DP_DE_LG_CONTROL (DE_LG_OFFSET + 0x04)
> +#define DP_DE_LG_COMPOSE (DE_LG_OFFSET + 0x08)
> +#define DP_DE_LG_IN_SIZE (DE_LG_OFFSET + 0x0C)
> +#define DP_DE_LG_CMP_SIZE (DE_LG_OFFSET + 0x10)
> +#define DP_DE_LG_OFFSET (DE_LG_OFFSET + 0x14)
> +#define DP_DE_LG_H_STRIDE (DE_LG_OFFSET + 0x18)
> +#define DP_DE_LG_PTR_LOW (DE_LG_OFFSET + 0x1C)
> +#define DP_DE_LG_PTR_HIGH (DE_LG_OFFSET + 0x20)
> +#define DP_DE_LG_CHROMA_KEY (DE_LG_OFFSET + 0x2C)
> +#define DP_DE_LG_AD_CONTROL (DE_LG_OFFSET + 0x30)
> +#define DP_DE_LG_MMU_CONTROL (DE_LG_OFFSET + 0x48)
> +
> +// Display core (DC) control register offsets.
> +#define DP_DC_OFFSET 0x0C000
> +#define DP_DC_STATUS (DP_DC_OFFSET + 0x00)
> +#define DP_DC_IRQ_SET (DP_DC_OFFSET + 0x04)
> +#define DP_DC_IRQ_MASK (DP_DC_OFFSET + 0x08)
> +#define DP_DC_IRQ_CLEAR (DP_DC_OFFSET + 0x0C)
> +#define DP_DC_CONTROL (DP_DC_OFFSET + 0x10)
> +#define DP_DC_CONFIG_VALID (DP_DC_OFFSET + 0x14)
> +#define DP_DC_CORE_ID (DP_DC_OFFSET + 0x18)
> +
> +// DP500 has a global configuration register.
> +#define DP_DP500_CONFIG_VALID (0xF00)
> +
> +// Display core ID register offsets.
> +#define DP_DC_ID_OFFSET 0x0FF00
> +#define DP_DC_ID_PERIPHERAL_ID4 (DP_DC_ID_OFFSET + 0xD0)
> +#define DP_DC_CONFIGURATION_ID (DP_DC_ID_OFFSET + 0xD4)
> +#define DP_DC_PERIPHERAL_ID0 (DP_DC_ID_OFFSET + 0xE0)
> +#define DP_DC_PERIPHERAL_ID1 (DP_DC_ID_OFFSET + 0xE4)
> +#define DP_DC_PERIPHERAL_ID2 (DP_DC_ID_OFFSET + 0xE8)
> +#define DP_DC_COMPONENT_ID0 (DP_DC_ID_OFFSET + 0xF0)
> +#define DP_DC_COMPONENT_ID1 (DP_DC_ID_OFFSET + 0xF4)
> +#define DP_DC_COMPONENT_ID2 (DP_DC_ID_OFFSET + 0xF8)
> +#define DP_DC_COMPONENT_ID3 (DP_DC_ID_OFFSET + 0xFC)
> +
> +#define DP_DP500_ID_OFFSET 0x0F00
> +#define DP_DP500_ID_PERIPHERAL_ID4 (DP_DP500_ID_OFFSET + 0xD0)
> +#define DP_DP500_CONFIGURATION_ID (DP_DP500_ID_OFFSET + 0xD4)
> +#define DP_DP500_PERIPHERAL_ID0 (DP_DP500_ID_OFFSET + 0xE0)
> +#define DP_DP500_PERIPHERAL_ID1 (DP_DP500_ID_OFFSET + 0xE4)
> +#define DP_DP500_PERIPHERAL_ID2 (DP_DP500_ID_OFFSET + 0xE8)
> +#define DP_DP500_COMPONENT_ID0 (DP_DP500_ID_OFFSET + 0xF0)
> +#define DP_DP500_COMPONENT_ID1 (DP_DP500_ID_OFFSET + 0xF4)
> +#define DP_DP500_COMPONENT_ID2 (DP_DP500_ID_OFFSET + 0xF8)
> +#define DP_DP500_COMPONENT_ID3 (DP_DP500_ID_OFFSET + 0xFC)
> +
> +// Display status configuration mode activation flag
> +#define DP_DC_STATUS_CM_ACTIVE_FLAG (0x1U << 16)
> +
> +// Display core control configuration mode
> +#define DP_DC_CONTROL_SRST_ACTIVE (0x1U << 18)
> +#define DP_DC_CONTROL_CRST_ACTIVE (0x1U << 17)
> +#define DP_DC_CONTROL_CM_ACTIVE (0x1U << 16)
> +
> +#define DP_DE_DP500_CONTROL_SOFTRESET_REQ (0x1U << 16)
> +#define DP_DE_DP500_CONTROL_CONFIG_REQ (0x1U << 17)
> +
> +// Display core configuration valid register
> +#define DP_DC_CONFIG_VALID_CVAL (0x1U)
> +
> +// DC_CORE_ID
> +// Display core version register PRODUCT_ID
> +#define DP_DC_CORE_ID_SHIFT 16
> +#define DP_DE_DP500_CORE_ID_SHIFT DP_DC_CORE_ID_SHIFT
> +
> +// Timing settings
> +#define DP_DE_HBACKPORCH_SHIFT 16
> +#define DP_DE_VBACKPORCH_SHIFT 16
> +#define DP_DE_VSP_SHIFT 28
> +#define DP_DE_VSYNCWIDTH_SHIFT 16
> +#define DP_DE_HSP_SHIFT 13
> +#define DP_DE_V_ACTIVE_SHIFT 16
> +
> +// BACKGROUND_COLOR
> +#define DP_DE_BG_R_PIXEL_SHIFT 16
> +#define DP_DE_BG_G_PIXEL_SHIFT 8
> +
> +//Graphics layer LG_FORMAT Pixel Format
> +#define DP_PIXEL_FORMAT_ARGB_8888 0x8
> +#define DP_PIXEL_FORMAT_ABGR_8888 0x9
> +#define DP_PIXEL_FORMAT_RGBA_8888 0xA
> +#define DP_PIXEL_FORMAT_BGRA_8888 0xB
> +#define DP_PIXEL_FORMAT_XRGB_8888 0x10
> +#define DP_PIXEL_FORMAT_XBGR_8888 0x11
> +#define DP_PIXEL_FORMAT_RGBX_8888 0x12
> +#define DP_PIXEL_FORMAT_BGRX_8888 0x13
> +#define DP_PIXEL_FORMAT_RGB_888 0x18
> +#define DP_PIXEL_FORMAT_BGR_888 0x19
> +
> +// DP500 format code are different than DP550/DP650
> +#define DP_PIXEL_FORMAT_DP500_ARGB_8888 0x2
> +#define DP_PIXEL_FORMAT_DP500_ABGR_8888 0x3
> +#define DP_PIXEL_FORMAT_DP500_XRGB_8888 0x4
> +#define DP_PIXEL_FORMAT_DP500_XBGR_8888 0x5
> +
> +// Graphics layer LG_PTR_LOW and LG_PTR_HIGH
> +#define DP_DE_LG_PTR_LOW_MASK 0xFFFFFFFFU
> +#define DP_DE_LG_PTR_HIGH_SHIFT 32
> +
> +// Graphics layer LG_CONTROL register characteristics
> +#define DP_DE_LG_L_ALPHA_SHIFT 16
> +#define DP_DE_LG_CHK_SHIFT 15
> +#define DP_DE_LG_PMUL_SHIFT 14
> +#define DP_DE_LG_COM_SHIFT 12
> +#define DP_DE_LG_VFP_SHIFT 11
> +#define DP_DE_LG_HFP_SHIFT 10
> +#define DP_DE_LG_ROTATION_SHIFT 8
> +
> +#define DP_DE_LG_LAYER_BLEND_NO_BG 0x0U
> +#define DP_DE_LG_PIXEL_BLEND_NO_BG 0x1U
> +#define DP_DE_LG_LAYER_BLEND_BG 0x2U
> +#define DP_DE_LG_PIXEL_BLEND_BG 0x3U
> +#define DP_DE_LG_ENABLE 0x1U
> +
> +// Graphics layer LG_IN_SIZE register characteristics
> +#define DP_DE_LG_V_IN_SIZE_SHIFT 16
> +
> +// Graphics layer LG_CMP_SIZE register characteristics
> +#define DP_DE_LG_V_CMP_SIZE_SHIFT 16
> +#define DP_DE_LG_V_OFFSET_SHIFT 16
> +
> +// Helper display timing macro functions.
> +#define H_INTERVALS(Hfp, Hbp) ((Hbp << DP_DE_HBACKPORCH_SHIFT) | Hfp)
> +#define V_INTERVALS(Vfp, Vbp) ((Vbp << DP_DE_VBACKPORCH_SHIFT) | Vfp)
> +#define SYNC_WIDTH(Hsw, Vsw) ((Vsw << DP_DE_VSYNCWIDTH_SHIFT) | Hsw)
> +#define HV_ACTIVE(Hor, Ver) ((Ver << DP_DE_V_ACTIVE_SHIFT) | Hor)
> +
> +// Helper layer graphics macros.
> +#define FRAME_IN_SIZE(Hor, Ver) ((Ver << DP_DE_LG_V_IN_SIZE_SHIFT) |
> Hor)
> +#define FRAME_CMP_SIZE(Hor, Ver) ((Ver << DP_DE_LG_V_CMP_SIZE_SHIFT) |
> Hor)
> +
> +#endif /* ARMMALIDP_H_ */
> diff --git a/ArmPlatformPkg/Library/ArmMaliDp/ArmMaliDp.inf
> b/ArmPlatformPkg/Library/ArmMaliDp/ArmMaliDp.inf
> new file mode 100644
> index
> 0000000000000000000000000000000000000000..4cf020e4c314b17f7944336512ca8688911cf1be
> --- /dev/null
> +++ b/ArmPlatformPkg/Library/ArmMaliDp/ArmMaliDp.inf
> @@ -0,0 +1,43 @@
> +#/** @file
> +#
> +# Component description file for ArmMaliDp module
> +#
> +# Copyright (c) 2017-2018, Arm Limited. All rights reserved.<BR>
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be
> found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR
> IMPLIED.
> +#
> +#**/
> +
> +[Defines]
> + INF_VERSION = 0x00010019
> + BASE_NAME = ArmMaliDp
> + FILE_GUID = E724AAF7-19E2-40A3-BAE1-D82A7C8B7A76
> + MODULE_TYPE = BASE
> + VERSION_STRING = 1.0
> + LIBRARY_CLASS = LcdHwLib
> +
> +[Sources.common]
> + ArmMaliDp.c
> +
> +[Packages]
> + ArmPkg/ArmPkg.dec
> + ArmPlatformPkg/ArmPlatformPkg.dec
> + MdeModulePkg/MdeModulePkg.dec
> + MdePkg/MdePkg.dec
> +
> +[LibraryClasses]
> + BaseLib
> + BaseMemoryLib
> + DebugLib
> + IoLib
> + LcdPlatformLib
> + UefiLib
> +
> +[FixedPcd]
> + gArmPlatformTokenSpaceGuid.PcdArmMaliDpBase
> +
> --
> 'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
>
>
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
