> -----Original Message----- > From: Marcin Wojtas [mailto:m...@semihalf.com] > Sent: Friday, October 12, 2018 1:33 PM > To: Wu, Hao A > Cc: edk2-devel-01; Tian, Feng; Kinney, Michael D; Gao, Liming; Leif Lindholm; > Ard Biesheuvel; nad...@marvell.com; j...@semihalf.com; Tomasz Michalec > Subject: Re: [PATCH v2 0/4] SdMmcOverride extension > > Hi Hao, > > pt., 12 paź 2018 o 07:25 Wu, Hao A <hao.a...@intel.com> napisał(a): > > > > Hi Marcin, > > > > Please grant me some time for this series. > > > > Since I found that the extension of the SdMmc override protocol (mainly > > the 3rd and 4th patch of the series) may have something overlaps with a > > (internal) request to configure the driver strength parameter and operating > > clock frequency of the SD/EMMC devices. > > > > For the (driver strength/operating freq) customize, we already have a > > proposal on the way. So I am wondering if you could grant me some time > to > > investigate whether both the cases can be addressed together based on > your > > proposed patch. > > > > Sure. I'm only wondering if it's not best to collect all remarks and > maybe update to v3 both edk2 and edk2-platforms sides (so far the > issues have been not critical, such as typos, parameters' names, > etc.). In the meantime you would be able to validate if the solution > is sufficient for you as well. What do you think? When do you expect > to be able to look at it vs your internal requirements more deeply? > > Best regards, > Marcin
I think you can hold the new version of the patch if the feedbacks do not lead to considerable changes. At this moment, I can barely take time for the evaluation. I think I will be able to fully shift to this in about 2 weeks. Does it sound acceptable to you with regard to the urgency level for the series? I will try my best to move up the process. Sorry again for the possible delay. Best Regards, Hao Wu > > > > Thanks in advance. > > > > Best Regards, > > Hao Wu > > > > > > > -----Original Message----- > > > From: Marcin Wojtas [mailto:m...@semihalf.com] > > > Sent: Friday, October 05, 2018 9:25 PM > > > To: edk2-devel@lists.01.org > > > Cc: Tian, Feng; Kinney, Michael D; Gao, Liming; leif.lindh...@linaro.org; > Wu, > > > Hao A; ard.biesheu...@linaro.org; nad...@marvell.com; > > > m...@semihalf.com; j...@semihalf.com; t...@semihalf.com > > > Subject: [PATCH v2 0/4] SdMmcOverride extension > > > > > > Hi, > > > > > > This is the second version of the patchset. Initial one was > > > interleaved with the fixes, which after split got already merged. > > > The biggest change is - resigning from the new callbacks > > > and extending parameter lists of both NotifyPhase and Capability > > > routines. > > > > > > Patches are available in the github: > > > https://github.com/MarvellEmbeddedProcessors/edk2-open- > > > platform/commits/sdmmc-override-upstream-r20181005 > > > > > > Please note that extending SdMmcOverride protocol was impacting > > > so far the only user of it (Synquacer controller). In paralel > > > edk2-platforms patchset, a patch can be found: > > > ("Silicon/SynQuacer/PlatformDxe: adjust to updated SdMmcOverride") > > > which immunizes for above and future extensions of the protocol: > > > https://github.com/MarvellEmbeddedProcessors/edk2-open- > > > platform/commits/xenon-upstream-r20181005 > > > > > > I'm looking forward to the comments and remarks. > > > > > > Best regards, > > > Marcin > > > > > > Changelog: > > > v1 -> v2 > > > * Rebase onto newest master > > > * 1/4 [new patch] - preparation for extending NotifyPhase > > > * 2/4 - UhsSignaling as a part of NotifyPhase > > > * 3/4 - SwitchClockFreqPost as a part of NotifyPhase > > > * 4/4 - Allow updating BaseClkFreq via Capability instead of the > > > independent callback. > > > > > > Marcin Wojtas (2): > > > MdeModulePkg/SdMmcPciHcDxe: Add an optional parameter in > > > NotifyPhase > > > MdeModulePkg/SdMmcPciHcDxe: Allow overriding base clock frequency > > > > > > Tomasz Michalec (2): > > > MdeModulePkg/SdMmcPciHcDxe: Add UhsSignaling to SdMmcOverride > > > protocol > > > MdeModulePkg/SdMmcPciHcDxe: Add SwitchClockFreqPost to > > > SdMmcOverride > > > > > > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHcDxe.h | 6 + > > > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.h | 62 +++++- > > > MdeModulePkg/Include/Protocol/SdMmcOverride.h | 12 +- > > > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/EmmcDevice.c | 215 > > > ++++++++++++++------ > > > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c | 57 +++++- > > > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHcDxe.c | 18 +- > > > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.c | 108 > ++++++++- > > > - > > > 7 files changed, 383 insertions(+), 95 deletions(-) > > > > > > -- > > > 2.7.4 > > _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel