Fix various typos in ArmVirtPkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Coeur <co...@gmx.fr>
---
ArmVirtPkg/ArmVirt.dsc.inc | 2 +-
ArmVirtPkg/Library/ArmVirtDxeHobLib/HobLib.c | 2 +-
ArmVirtPkg/Library/BaseCachingPciExpressLib/PciExpressLib.c | 4 ++--
.../FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c | 6 +++---
.../Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c | 6 +++---
ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBm.c | 4 ++--
6 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/ArmVirtPkg/ArmVirt.dsc.inc b/ArmVirtPkg/ArmVirt.dsc.inc
index c47955be94..304a4b4d21 100644
--- a/ArmVirtPkg/ArmVirt.dsc.inc
+++ b/ArmVirtPkg/ArmVirt.dsc.inc
@@ -333,7 +333,7 @@
# Values are in EFI Pages (4K). DXE Core will make sure that
# at least this much of each type of memory can be allocated
# from a single memory range. This way you only end up with
- # maximum of two fragements for each type in the memory map
+ # maximum of two fragments for each type in the memory map
# (the memory used, and the free memory that was prereserved
# but not used).
#
diff --git a/ArmVirtPkg/Library/ArmVirtDxeHobLib/HobLib.c
b/ArmVirtPkg/Library/ArmVirtDxeHobLib/HobLib.c
index 73a0fbd8a4..758bc91ab1 100644
--- a/ArmVirtPkg/Library/ArmVirtDxeHobLib/HobLib.c
+++ b/ArmVirtPkg/Library/ArmVirtDxeHobLib/HobLib.c
@@ -1,5 +1,5 @@
/** @file
- HOB Library implemenation for Dxe Phase with DebugLib dependency removed
+ HOB Library implementation for Dxe Phase with DebugLib dependency removed
Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2014, Linaro Ltd. All rights reserved.<BR>
diff --git a/ArmVirtPkg/Library/BaseCachingPciExpressLib/PciExpressLib.c
b/ArmVirtPkg/Library/BaseCachingPciExpressLib/PciExpressLib.c
index 6479f53b37..a083826bab 100644
--- a/ArmVirtPkg/Library/BaseCachingPciExpressLib/PciExpressLib.c
+++ b/ArmVirtPkg/Library/BaseCachingPciExpressLib/PciExpressLib.c
@@ -1238,7 +1238,7 @@ PciExpressBitFieldAndThenOr32 (
Size into the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be read. Size is
returned. When possible 32-bit PCI configuration read cycles are used to read
- from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit
+ from StartAddress to StartAddress + Size. Due to alignment restrictions,
8-bit
and 16-bit PCI configuration read cycles may be used at the beginning and the
end of the range.
@@ -1338,7 +1338,7 @@ PciExpressReadBuffer (
Size from the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be written. Size is
returned. When possible 32-bit PCI configuration write cycles are used to
- write from StartAdress to StartAddress + Size. Due to alignment restrictions,
+ write from StartAddress to StartAddress + Size. Due to alignment
restrictions,
8-bit and 16-bit PCI configuration write cycles may be used at the beginning
and the end of the range.
diff --git
a/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c
b/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c
index f0924dacbc..16c0e61816 100644
--- a/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c
+++ b/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c
@@ -234,13 +234,13 @@ SerialPortGetControl (
}
/**
- Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
+ Sets the baud rate, receive FIFO depth, transmit/receive time out, parity,
data bits, and stop bits on a serial device.
@param BaudRate The requested baud rate. A BaudRate value of 0
will use the
device's default interface speed.
On output, the value actually set.
- @param ReveiveFifoDepth The requested depth of the FIFO on the receive
side of the
+ @param ReceiveFifoDepth The requested depth of the FIFO on the receive
side of the
serial interface. A ReceiveFifoDepth value of 0
will use
the device's default FIFO depth.
On output, the value actually set.
@@ -253,7 +253,7 @@ SerialPortGetControl (
DefaultParity will use the device's default parity
value.
On output, the value actually set.
@param DataBits The number of data bits to use on the serial
device. A DataBits
- vaule of 0 will use the device's default data bit
setting.
+ value of 0 will use the device's default data bit
setting.
On output, the value actually set.
@param StopBits The number of stop bits to use on this serial
device. A StopBits
value of DefaultStopBits will use the device's
default number of
diff --git a/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c
b/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c
index 8b736fd11f..2f10fb7b91 100644
--- a/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c
+++ b/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c
@@ -156,13 +156,13 @@ SerialPortPoll (
}
/**
- Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
+ Sets the baud rate, receive FIFO depth, transmit/receive time out, parity,
data bits, and stop bits on a serial device.
@param BaudRate The requested baud rate. A BaudRate value of 0
will use the
device's default interface speed.
On output, the value actually set.
- @param ReveiveFifoDepth The requested depth of the FIFO on the receive
side of the
+ @param ReceiveFifoDepth The requested depth of the FIFO on the receive
side of the
serial interface. A ReceiveFifoDepth value of 0
will use
the device's default FIFO depth.
On output, the value actually set.
@@ -175,7 +175,7 @@ SerialPortPoll (
DefaultParity will use the device's default parity
value.
On output, the value actually set.
@param DataBits The number of data bits to use on the serial
device. A DataBits
- vaule of 0 will use the device's default data bit
setting.
+ value of 0 will use the device's default data bit
setting.
On output, the value actually set.
@param StopBits The number of stop bits to use on this serial
device. A StopBits
value of DefaultStopBits will use the device's
default number of
diff --git a/ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBm.c
b/ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBm.c
index bb07f5e22b..534357eff4 100644
--- a/ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBm.c
+++ b/ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBm.c
@@ -779,11 +779,11 @@ PlatformBootManagerBeforeConsole (
Do the platform specific action after the console is ready
Possible things that can be done in PlatformBootManagerAfterConsole:
> Console post action:
- > Dynamically switch output mode from 100x31 to 80x25 for certain senarino
+ > Dynamically switch output mode from 100x31 to 80x25 for certain scenario
> Signal console ready platform customized event
> Run diagnostics like memory testing
> Connect certain devices
- > Dispatch aditional option roms
+ > Dispatch additional option roms
> Special boot: e.g.: USB boot, enter UI
**/
VOID
--
2.17.2 (Apple Git-113)
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
