On 2/6/19 4:46 PM, Antoine Coeur wrote:
> Fix various typos in ArmPlatformPkg.
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Coeur <co...@gmx.fr>
> ---
> ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.c | 4 ++--
> ArmPlatformPkg/Include/Library/ArmPlatformLib.h | 2 +-
> ArmPlatformPkg/Include/Library/PL011UartLib.h | 2 +-
> ArmPlatformPkg/Library/PL011UartLib/PL011UartLib.c | 2 +-
> ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.c | 2 +-
> ArmPlatformPkg/PlatformPei/PlatformPeim.c | 2 +-
> ArmPlatformPkg/PrePeiCore/PrePeiCore.c | 2 +-
> ArmPlatformPkg/PrePi/PrePi.c | 2 +-
> 8 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.c
> b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.c
> index af40a4c884..73d389c811 100644
> --- a/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.c
> +++ b/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.c
> @@ -1115,7 +1115,7 @@ NorFlashWriteSingleBlock (
> @retval EFI_SUCCESS The data was read correctly from the device.
> @retval EFI_DEVICE_ERROR The device reported an error while
> performing the read.
> @retval EFI_NO_MEDIA There is no media in the device.
> - @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current
> device.
> + @retval EFI_MEDIA_CHANGED The MediaId does not match the current
> device.
We could argue if this one is strictly a *typo* ;)
> @retval EFI_INVALID_PARAMETER The read request contains device addresses
> that are not
> valid for the device.
>
> @@ -1160,7 +1160,7 @@ NorFlashDiskIoReadDisk (
> @retval EFI_WRITE_PROTECTED The device can not be written to.
> @retval EFI_DEVICE_ERROR The device reported an error while
> performing the write.
> @retval EFI_NO_MEDIA There is no media in the device.
> - @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current
> device.
> + @retval EFI_MEDIA_CHANGED The MediaId does not match the current
> device.
> @retval EFI_INVALID_PARAMETER The write request contains device addresses
> that are not
> valid for the device.
>
> diff --git a/ArmPlatformPkg/Include/Library/ArmPlatformLib.h
> b/ArmPlatformPkg/Include/Library/ArmPlatformLib.h
> index 3ad4c16066..fd264b31f7 100644
> --- a/ArmPlatformPkg/Include/Library/ArmPlatformLib.h
> +++ b/ArmPlatformPkg/Include/Library/ArmPlatformLib.h
> @@ -20,7 +20,7 @@
> //
> #include <PiPei.h>
> //
> -// The protocols, PPI and GUID defintions for this module
> +// The protocols, PPI and GUID definitions for this module
> //
> #include <Ppi/MasterBootMode.h>
> #include <Ppi/BootInRecoveryMode.h>
> diff --git a/ArmPlatformPkg/Include/Library/PL011UartLib.h
> b/ArmPlatformPkg/Include/Library/PL011UartLib.h
> index 8cfc3d118a..495def8d7d 100644
> --- a/ArmPlatformPkg/Include/Library/PL011UartLib.h
> +++ b/ArmPlatformPkg/Include/Library/PL011UartLib.h
> @@ -118,7 +118,7 @@ PL011UartSetControl (
> . EFI_SERIAL_OUTPUT_BUFFER_EMPTY : equal to one if
> the
> transmit buffer is empty, 0 otherwise.
> . EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE : equal to
> one if
> - the hardware loopback is enabled (the ouput feeds
> the
> + the hardware loopback is enabled (the output
> feeds the
> receive buffer), 0 otherwise.
> . EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE : equal to
> one if
> a loopback is accomplished by software, 0
> otherwise.
> diff --git a/ArmPlatformPkg/Library/PL011UartLib/PL011UartLib.c
> b/ArmPlatformPkg/Library/PL011UartLib/PL011UartLib.c
> index 61a34fda0b..60c06a63a4 100644
> --- a/ArmPlatformPkg/Library/PL011UartLib/PL011UartLib.c
> +++ b/ArmPlatformPkg/Library/PL011UartLib/PL011UartLib.c
> @@ -327,7 +327,7 @@ PL011UartSetControl (
> . EFI_SERIAL_OUTPUT_BUFFER_EMPTY : equal to one if
> the
> transmit buffer is empty, 0 otherwise.
> . EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE : equal to
> one if
> - the hardware loopback is enabled (the ouput feeds
> the
> + the hardware loopback is enabled (the output
> feeds the
> receive buffer), 0 otherwise.
> . EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE : equal to
> one if
> a loopback is accomplished by software, 0
> otherwise.
Which makes me wonder what is the benefit of copying the same doc twice,
in the header and the source?
> diff --git a/ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.c
> b/ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.c
> index 010f93add7..6f2a357b96 100644
> --- a/ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.c
> +++ b/ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.c
> @@ -15,7 +15,7 @@
> #include <PiPei.h>
>
> //
> -// The protocols, PPI and GUID defintions for this module
> +// The protocols, PPI and GUID definitions for this module
> //
> #include <Ppi/MasterBootMode.h>
> #include <Ppi/BootInRecoveryMode.h>
> diff --git a/ArmPlatformPkg/PlatformPei/PlatformPeim.c
> b/ArmPlatformPkg/PlatformPei/PlatformPeim.c
> index 14f301e947..4d9f3c2d54 100644
> --- a/ArmPlatformPkg/PlatformPei/PlatformPeim.c
> +++ b/ArmPlatformPkg/PlatformPei/PlatformPeim.c
> @@ -15,7 +15,7 @@
> #include <PiPei.h>
>
> //
> -// The protocols, PPI and GUID defintions for this module
> +// The protocols, PPI and GUID definitions for this module
> //
> #include <Ppi/MasterBootMode.h>
> #include <Ppi/BootInRecoveryMode.h>
> diff --git a/ArmPlatformPkg/PrePeiCore/PrePeiCore.c
> b/ArmPlatformPkg/PrePeiCore/PrePeiCore.c
> index 3a81e2e23f..be1d28a4d6 100644
> --- a/ArmPlatformPkg/PrePeiCore/PrePeiCore.c
> +++ b/ArmPlatformPkg/PrePeiCore/PrePeiCore.c
> @@ -44,7 +44,7 @@ CreatePpiList (
> PlatformPpiListSize = 0;
> ArmPlatformGetPlatformPpiList (&PlatformPpiListSize, &PlatformPpiList);
>
> - // Copy the Common and Platform PPis in Temporrary Memory
> + // Copy the Common and Platform PPis in Temporary Memory
> ListBase = PcdGet64 (PcdCPUCoresStackBase);
> CopyMem ((VOID*)ListBase, gCommonPpiTable, sizeof(gCommonPpiTable));
> CopyMem ((VOID*)(ListBase + sizeof(gCommonPpiTable)), PlatformPpiList,
> PlatformPpiListSize);
> diff --git a/ArmPlatformPkg/PrePi/PrePi.c b/ArmPlatformPkg/PrePi/PrePi.c
> index 245bdded1e..a9cd8b8f9d 100644
> --- a/ArmPlatformPkg/PrePi/PrePi.c
> +++ b/ArmPlatformPkg/PrePi/PrePi.c
> @@ -199,7 +199,7 @@ CEntryPoint (
> ArmCallSEV ();
> }
> } else {
> - // Wait the Primay core has defined the address of the Global Variable
> region (event: ARM_CPU_EVENT_DEFAULT)
> + // Wait the Primary core has defined the address of the Global
> Variable region (event: ARM_CPU_EVENT_DEFAULT)
> ArmCallWFE ();
> }
> }
>
Reviewed-by: Philippe Mathieu-Daude <phi...@redhat.com>
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
