On Fri, Feb 01, 2019 at 09:34:29PM +0800, Ming Huang wrote:
> Add PCI_OSC_SUPPORT for remaining host bridges to remove fail
> output in kernel:
> [  103.478893] acpi PNP0A08:01: _OSC failed (AE_NOT_FOUND);
> 
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Ming Huang <ming.hu...@linaro.org>
> ---
>  Silicon/Hisilicon/Hi1620/Hi1620AcpiTables/Dsdt/Hi1620Pci.asl | 64 
> ++++++++++++++++++++
>  1 file changed, 64 insertions(+)
> 
> diff --git a/Silicon/Hisilicon/Hi1620/Hi1620AcpiTables/Dsdt/Hi1620Pci.asl 
> b/Silicon/Hisilicon/Hi1620/Hi1620AcpiTables/Dsdt/Hi1620Pci.asl
> index 4d9d9d95be68..86d8728b82f2 100644
> --- a/Silicon/Hisilicon/Hi1620/Hi1620AcpiTables/Dsdt/Hi1620Pci.asl
> +++ b/Silicon/Hisilicon/Hi1620/Hi1620AcpiTables/Dsdt/Hi1620Pci.asl
> @@ -17,6 +17,50 @@
>  **/
>  
>  //#include "ArmPlatform.h"
> +
> +/*
> +  See ACPI 6.1 Spec, 6.2.11, PCI Firmware Spec 3.0, 4.5
> +*/
> +#define PCI_OSC_SUPPORT() \

PCI0 and PCI6 already have _OSC entries.
This macro ends up being used for 1-5 and 7-B.
So calling it PCI_OSC_SUPPORT seems somewhat misleading.

Then again, there is a lot of similarities between this macro and the
existing entries. Could the same macro be used for 0 and 6? Or could
the macro be split up into multiple parts and reused?

/
    Leif

> +  Name(SUPP, Zero) /* PCI _OSC Support Field value */ \
> +  Name(CTRL, Zero) /* PCI _OSC Control Field value */ \
> +  Method(_OSC,4) { \
> +    If(LEqual(Arg0,ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766"))) { \
> +      /* Create DWord-adressable fields from the Capabilities Buffer */ \
> +      CreateDWordField(Arg3,0,CDW1) \
> +      CreateDWordField(Arg3,4,CDW2) \
> +      CreateDWordField(Arg3,8,CDW3) \
> +      /* Save Capabilities DWord2 & 3 */ \
> +      Store(CDW2,SUPP) \
> +      Store(CDW3,CTRL) \
> +      /* Only allow native hot plug control if OS supports: */ \
> +      /* ASPM */ \
> +      /* Clock PM */ \
> +      /* MSI/MSI-X */ \
> +      If(LNotEqual(And(SUPP, 0x16), 0x16)) { \
> +        And(CTRL,0x1E,CTRL) \
> +      }\
> +      \
> +      /* Do not allow native PME, AER */ \
> +      /* Never allow SHPC (no SHPC controller in this system)*/ \
> +      And(CTRL,0x10,CTRL) \
> +      If(LNotEqual(Arg1,One)) { /* Unknown revision */ \
> +        Or(CDW1,0x08,CDW1) \
> +      } \
> +      \
> +      If(LNotEqual(CDW3,CTRL)) { /* Capabilities bits were masked */ \
> +        Or(CDW1,0x10,CDW1) \
> +      } \
> +      \
> +      /* Update DWORD3 in the buffer */ \
> +      Store(CTRL,CDW3) \
> +      Return(Arg3) \
> +    } Else { \
> +      Or(CDW1,4,CDW1) /* Unrecognized UUID */ \
> +      Return(Arg3) \
> +    } \
> +  } // End _OSC
> +
>  Scope(_SB)
>  {
>    Device (PCI0)
> @@ -270,6 +314,8 @@ Device (PCI1)
>      Return (RBUF)
>    }                                         // Method(_CRS), this method 
> return RBUF!
>  
> +  PCI_OSC_SUPPORT ()
> +
>    Method (_STA, 0x0, NotSerialized)
>    {
>      Return (0xf)
> @@ -333,6 +379,8 @@ Device (PCI2)
>      Return (RBUF)
>    }                                         // Method(_CRS), this method 
> return RBUF!
>  
> +  PCI_OSC_SUPPORT ()
> +
>    Method (_STA, 0x0, NotSerialized)
>    {
>      Return (0xf)
> @@ -382,6 +430,8 @@ Device (PCI3)
>      Return (RBUF)
>    }                                         // Method(_CRS), this method 
> return RBUF!
>  
> +  PCI_OSC_SUPPORT ()
> +
>    Method (_STA, 0x0, NotSerialized)
>    {
>      Return (0xf)
> @@ -431,6 +481,8 @@ Device (PCI4)
>      Return (RBUF)
>    }                                         // Method(_CRS), this method 
> return RBUF!
>  
> +  PCI_OSC_SUPPORT ()
> +
>    Method (_STA, 0x0, NotSerialized)
>    {
>      Return (0x0F)
> @@ -505,6 +557,8 @@ Device (PCI5)
>      Return (RBUF)
>    }                                    // Method(_CRS), this method return 
> RBUF!
>  
> +  PCI_OSC_SUPPORT ()
> +
>    Method (_STA, 0x0, NotSerialized)
>    {
>      Return (0xf)
> @@ -1002,6 +1056,8 @@ Device (PCI7)
>      Return (RBUF)
>    }                                         // Method(_CRS), this method 
> return RBUF!
>  
> +  PCI_OSC_SUPPORT ()
> +
>    Method (_STA, 0x0, NotSerialized)
>    {
>      Return (0xf)
> @@ -1066,6 +1122,8 @@ Device (PCI8)
>      Return (RBUF)
>    }                                         // Method(_CRS), this method 
> return RBUF!
>  
> +  PCI_OSC_SUPPORT ()
> +
>    Method (_STA, 0x0, NotSerialized)
>    {
>      Return (0xf)
> @@ -1115,6 +1173,8 @@ Device (PCI9)
>      Return (RBUF)
>    }                                         // Method(_CRS), this method 
> return RBUF!
>  
> +  PCI_OSC_SUPPORT ()
> +
>    Method (_STA, 0x0, NotSerialized)
>    {
>      Return (0xf)
> @@ -1164,6 +1224,8 @@ Device (PCIA)
>      Return (RBUF)
>    }                                         // Method(_CRS), this method 
> return RBUF!
>  
> +  PCI_OSC_SUPPORT ()
> +
>    Method (_STA, 0x0, NotSerialized)
>    {
>      Return (0x0F)
> @@ -1238,6 +1300,8 @@ Device (PCIB)
>      Return (RBUF)
>    }                                         // Method(_CRS), this method 
> return RBUF!
>  
> +  PCI_OSC_SUPPORT ()
> +
>    Method (_STA, 0x0, NotSerialized)
>    {
>      Return (0xf)
> -- 
> 2.9.5
> 
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel

Reply via email to