Hi Shiva,
Could you tell a bit more about 'But, UEFI is not even checking zImage
presented in the partition.' ?
One common mistake is a misspell error in the device path. One way to check
it is to start EBL and type the command 'devicepath'. It will print all the
EFI Device Paths expose by your UEFI firmware.
Regards,
Olivier
From: Shivamurthy Shastri [mailto:shiva.linuxwo...@gmail.com]
Sent: 31 July 2012 06:33
To: edk2-devel@lists.sourceforge.net
Subject: [edk2] booting linux kernel using EBL
Hi,
I am working on some samsung board, I am new to this UEFI. I got the FD of
the image and I am trying run UEFI on the board.
UEFI is getting started without any problem. I am getting directly EBL shell
prompt. Now, I need to boot linux kernel on that.
Meanwhile, I created FAT partition on SD card and UEFI is detecting that. I
have added below line in dsc file.
gArmPlatformTokenSpaceGuid.PcdDefaultBootDevicePath|L"VenHw(3A02E7FE-0649-4F
B4-BE4F-A862CA1872A9)/HD(1,MBR,0x13883578,0x2800,0x1DAA400)/zImage"
But, UEFI is not even checking zImage presented in the partition.
Please any one tell me how to go ahead after this.
--
Thanks and Regards,
Shiva.
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/edk2-devel
