Thanks Jaben, that got the shell to load. We should have such dependencies
listed somewhere.
It now halts at:
1. UiString Shell
2. add-symbol-file
/work/workspace/workspace/ap-uefi-bin/EDK2_ARCH/ARM/EDK2_BINARY/ShellPkg/label/sas-sw/Build/Shell/RELEASE_RVCTLINUX/ARM/ShellPkg/Application/Shell/Shell/DEBUG/Shell.dll
0xBAAC2240
3. Loading driver at 0x000BAAC2000 EntryPoint=0x000BAB09C4D Shell.efi
4. UEFI Interactive Shell v2.0
5. EDK II
6. UEFI v2.40 (BeagleBoneBlack EFI Aug 7 2014 17:39:13, 0x00000000)
7. Mapping table
8. Error. No mapping found
9. Error. Error. No SimpleTextInputEx was found. CTRL based features
are not usable.
10. Error. Error. No SimpleTextInputEx was found. CTRL based features
are not usable.
11. Press ESC in 5 seconds to skip startup.nsh or any other key to
continue.
I'll figure it out.
Thank you,
Varad.
On Thu, Aug 7, 2014 at 11:26 PM, Carsey, Jaben <[email protected]>
wrote:
> Do you have UnicodeCollation2Protocol ?
>
>
>
> *From:* Varad Gautam [mailto:[email protected]]
> *Sent:* Thursday, August 07, 2014 10:43 AM
> *To:* [email protected]
> *Subject:* Re: [edk2] UEFI Version for ShellBinPkg
>
>
>
> Hi Olivier,
>
> Uncommenting GraphicsConsoleDxe did not help. This is what I'm building
> now: [1]
>
> Building with ShellPkg instead of ShellBinPkg also presents the same
> message on
>
> Status = ShellCommandLibConstructor (ImageHandle, SystemTable);
> ASSERT_EFI_ERROR (Status);
>
>
>
> lines in ShellPkg:AutoGen.c
>
>
> [1]
> https://github.com/varadgautam/TexasInstrumentsPkg/tree/master/BeagleBoneBlackPkg
>
> Thanks,
> Varad
>
>
>
> On Thu, Aug 7, 2014 at 8:40 PM, Olivier Martin <[email protected]>
> wrote:
>
> Try to restore ‘INF
> MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf’
>
> I can see is commented out into your FDF file.
>
>
>
> *From:* Varad Gautam [mailto:[email protected]]
> *Sent:* 07 August 2014 14:43
> *To:* [email protected]
> *Subject:* [edk2] UEFI Version for ShellBinPkg
>
>
>
> Hi,
>
> I am loading Shell.efi from BDS, and it hangs with the following message:
>
> add-symbol-file
> /work/workspace/workspace/ap-uefi-bin/EDK2_ARCH/ARM/EDK2_BINARY/ShellPkg/label/sas-sw/Build/Shell/RELEASE_RVCTLINUX/ARM/ShellPkg/Application/Shell/Shell/DEBUG/Shell.dll
> 0xBAAC2240
> Loading driver at 0x000BAAC2000 EntryPoint=0x000BAB09C4D Shell.efi
>
> ASSERT_EFI_ERROR (Status = Device Error)
> ASSERT
> /work/workspace/workspace/ap-uefi-bin/EDK2_ARCH/ARM/EDK2_BINARY/ShellPkg/label/sas-sw/Build/Shell/RELEASE_RVCTLINUX/ARM/ShellPkg/Application/Shell/Shell/DEBUG/AutoGen.c(454):
> !EFI_ERROR (Status)
>
> According to the thread at [1] I tried adding DevicePathDxe and
> HiiDatabaseDxe to the FDF, but it didn't help. Can I check what Hii version
> am I running, and what version is required?
>
>
> [1]
> http://feishare.com/efimail/messages/20120120-0035-Re__edk2__Inclusion_of_UEFI_shell_in_Linux_distro_iso-Keshav_P_R.html
>
> Thanks,
> Varad
>
>
>
> ------------------------------------------------------------------------------
> Infragistics Professional
> Build stunning WinForms apps today!
> Reboot your WinForms applications with our WinForms controls.
> Build a bridge from your legacy apps to the future.
>
> http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
> _______________________________________________
> edk2-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/edk2-devel
>
>
>
>
> ------------------------------------------------------------------------------
> Infragistics Professional
> Build stunning WinForms apps today!
> Reboot your WinForms applications with our WinForms controls.
> Build a bridge from your legacy apps to the future.
>
> http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
> _______________________________________________
> edk2-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/edk2-devel
>
>
------------------------------------------------------------------------------
Infragistics Professional
Build stunning WinForms apps today!
Reboot your WinForms applications with our WinForms controls.
Build a bridge from your legacy apps to the future.
http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
_______________________________________________
edk2-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/edk2-devel
