by now, SwitchBSP() always return UNSUPPORTED
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen Fan <[email protected]>
---
UefiCpuPkg/CpuDxe/CpuMp.c | 47 ++++++++++++++++++++++++++++++++++++++++++++++-
UefiCpuPkg/CpuDxe/CpuMp.h | 43 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 89 insertions(+), 1 deletion(-)
diff --git a/UefiCpuPkg/CpuDxe/CpuMp.c b/UefiCpuPkg/CpuDxe/CpuMp.c
index ead7b1e..b756535 100644
--- a/UefiCpuPkg/CpuDxe/CpuMp.c
+++ b/UefiCpuPkg/CpuDxe/CpuMp.c
@@ -37,7 +37,7 @@ EFI_MP_SERVICES_PROTOCOL mMpServicesTemplate = {
GetProcessorInfo,
StartupAllAPs,
StartupThisAP,
- NULL, // SwitchBSP,
+ SwitchBSP,
EnableDisableAP,
WhoAmI
};
@@ -788,6 +788,51 @@ Done:
return EFI_SUCCESS;
}
+/**
+ This service switches the requested AP to be the BSP from that point onward.
+ This service changes the BSP for all purposes. This call can only be
performed
+ by the current BSP.
+
+ This service switches the requested AP to be the BSP from that point onward.
+ This service changes the BSP for all purposes. The new BSP can take over the
+ execution of the old BSP and continue seamlessly from where the old one left
+ off. This service may not be supported after the UEFI Event
EFI_EVENT_GROUP_READY_TO_BOOT
+ is signaled.
+
+ If the BSP cannot be switched prior to the return from this service, then
+ EFI_UNSUPPORTED must be returned.
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL
instance.
+ @param[in] ProcessorNumber The handle number of AP that is to become the
new
+ BSP. The range is from 0 to the total number of
+ logical processors minus 1. The total number of
+ logical processors can be retrieved by
+
EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().
+ @param[in] EnableOldBSP If TRUE, then the old BSP will be listed as an
+ enabled AP. Otherwise, it will be disabled.
+
+ @retval EFI_SUCCESS BSP successfully switched.
+ @retval EFI_UNSUPPORTED Switching the BSP cannot be completed prior
to
+ this service returning.
+ @retval EFI_UNSUPPORTED Switching the BSP is not supported.
+ @retval EFI_SUCCESS The calling processor is an AP.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the current BSP or
+ a disabled AP.
+ @retval EFI_NOT_READY The specified AP is busy.
+
+**/
+EFI_STATUS
+EFIAPI
+SwitchBSP (
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ IN UINTN ProcessorNumber,
+ IN BOOLEAN EnableOldBSP
+ )
+{
+ return EFI_UNSUPPORTED;
+}
/**
This service lets the caller enable or disable an AP from this point onward.
diff --git a/UefiCpuPkg/CpuDxe/CpuMp.h b/UefiCpuPkg/CpuDxe/CpuMp.h
index 52bda7e..d1a5a22 100644
--- a/UefiCpuPkg/CpuDxe/CpuMp.h
+++ b/UefiCpuPkg/CpuDxe/CpuMp.h
@@ -503,6 +503,49 @@ StartupAllAPs (
OUT UINTN **FailedCpuList OPTIONAL
);
+/**
+ This service switches the requested AP to be the BSP from that point onward.
+ This service changes the BSP for all purposes. This call can only be
performed
+ by the current BSP.
+
+ This service switches the requested AP to be the BSP from that point onward.
+ This service changes the BSP for all purposes. The new BSP can take over the
+ execution of the old BSP and continue seamlessly from where the old one left
+ off. This service may not be supported after the UEFI Event
EFI_EVENT_GROUP_READY_TO_BOOT
+ is signaled.
+
+ If the BSP cannot be switched prior to the return from this service, then
+ EFI_UNSUPPORTED must be returned.
+
+ @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL
instance.
+ @param[in] ProcessorNumber The handle number of AP that is to become the
new
+ BSP. The range is from 0 to the total number of
+ logical processors minus 1. The total number of
+ logical processors can be retrieved by
+
EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().
+ @param[in] EnableOldBSP If TRUE, then the old BSP will be listed as an
+ enabled AP. Otherwise, it will be disabled.
+
+ @retval EFI_SUCCESS BSP successfully switched.
+ @retval EFI_UNSUPPORTED Switching the BSP cannot be completed prior
to
+ this service returning.
+ @retval EFI_UNSUPPORTED Switching the BSP is not supported.
+ @retval EFI_SUCCESS The calling processor is an AP.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the current BSP or
+ a disabled AP.
+ @retval EFI_NOT_READY The specified AP is busy.
+
+**/
+EFI_STATUS
+EFIAPI
+SwitchBSP (
+ IN EFI_MP_SERVICES_PROTOCOL *This,
+ IN UINTN ProcessorNumber,
+ IN BOOLEAN EnableOldBSP
+ );
+
/**
This service lets the caller enable or disable an AP from this point onward.
--
1.9.3
------------------------------------------------------------------------------
Want excitement?
Manually upgrade your production database.
When you want reliability, choose Perforce
Perforce version control. Predictably reliable.
http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk
_______________________________________________
edk2-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/edk2-devel
