Debugging NT32 emulator does not need Intel UDK Debugger and
SourceLevelDebugPkg.
Attach SecMain.exe and put one CpuBreakpoint () in your code and use Visual
Studio to do source debugging.
From: partha sarathi swain [mailto:[email protected]]
Sent: Wednesday, September 24, 2014 4:21 PM
To: [email protected]
Subject: [edk2] Debugging a application running on NT32 Emulator using Intel
EDK debugger tool
Hi all,
I have developed an application using UDK2014 and tested it on NT32 emulator.
Now i put a software interrupt so that i can attach the process (SecMain.exe)
to a debugger.
I started Intel EDk Debugger tool and kept the channel as "PIPE" like one below
[Debug Port]
Channel = PIPE
Port = PipeName
But i am not able to debug the source. Pipename is not listed in the process
handles.
Note: i have included the "SourcelevelDebugPkg" in Nt32Pkg.dsc.
Could you please suggested me a way to debug the application running in NT32
emulator.
Thanks & Regards
Partha Sarathi Swain
------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
edk2-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/edk2-devel
