Hi Sajeesh,
I need more information to understand your question. As you said you are
implementing EFI_VLAN_CONIFG_PROTOCOL in your UNDI driver, do you use your own
network modules for PXE boot, or you use UEFI network stack? If you use UEFI
network stack, MnpDxe driver already supplies EFI_VLAN_CONIFG_PROTOCOL and
VlanConfigDxe provides UI configuration.
Best Regards,
Ye Ting
From: Sajeesh Kk [mailto:sajee...@gmail.com]
Sent: Saturday, March 14, 2015 2:00 AM
To: edk2-devel@lists.sourceforge.net
Subject: [edk2] Vlan config protocol Query
Hello,
I am supporting vlan config protocol in undi driver four our network adapter. I
am creating vlan device path on to the same handle on which NII protocol is
installed. I could see that i get a set call when
VLAN is configured and the device path created looks ok. when tried to perform
PXE boot, i could see Undi_Shutdown and Undi_stop calls comming in. Can someone
explain whether i am proceeding in the right direction and there after no Undi
calls are comming. Not able to figiure out
why this is happening. Any help in this regard greatly appreciated.
Thanks,
Sajeesh.
------------------------------------------------------------------------------
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the
conversation now. http://goparallel.sourceforge.net/
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/edk2-devel
