So it could allow platform module to change the serial clock rate per different
hardware.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu...@intel.com>
Cc: Feng Tian <feng.t...@intel.com>
---
MdeModulePkg/MdeModulePkg.dec | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index 39793b8..15d351d 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -890,10 +890,6 @@
# @Prompt Memory profile memory type.
gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042
- ## UART clock frequency is for the baud rate configuration.
- # @Prompt Serial Port Clock Rate.
- gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066
-
## PCI Serial Device Info. It is an array of Device, Function, and Power
Management
# information that describes the path that contains zero or more PCI to PCI
briges
# followed by a PCI serial device. Each array entry is 4-bytes in length.
The
@@ -968,6 +964,10 @@
gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e
[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
+ ## UART clock frequency is for the baud rate configuration.
+ # @Prompt Serial Port Clock Rate.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066
+
## This PCD points to the front page formset GUID
# Compare the FormsetGuid or ClassGuid with this PCD value can detect
whether in front page
gEfiMdeModulePkgTokenSpaceGuid.PcdFrontPageFormSetGuid|{ 0xbc, 0x30, 0x0c,
0x9e,0x06, 0x3f, 0xa6, 0x4b, 0x82, 0x88, 0x9, 0x17, 0x9b, 0x85, 0x5d, 0xbe
}|VOID*|0x0001006e
--
1.9.5.msysgit.1
------------------------------------------------------------------------------
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/edk2-devel
