Hi Yes, we have also issues
We using the following hardware -Server P4, 3 GHz, Ram: 2 MB, Motherboard: Intel Desktop Board D915GAV - HP Laserjet 11000 (usb connection) - 10 thin clients, Intel celeron 400 MHz, Ram: 64 MB, Networkcards Realteak (RTL 8139). Motherboard: Intel BI440ZX Else: - Distro: Feisty - XDIRECT =true If you add 3 OpenClipart pictures (.png) to an empty document (all pictures on the same page, on the upper half of the page), I observed that the printing is quite slow. Generally I saw that the the Memory from our server goes up by 700 MB for this single document. See this example: 1.) Memory usage 1.2 GByte 2.) On thin client: OpenOffice: Clicks on printing. 3.) Memory on server is increasing steady to 1.9 GByte (duration 1 - 2 minutes) 4.) As soon as the memory stays stable on 1.9 GByte, the document is showing up in the printer manager (started with administration rights) 5.) Then after 10 seconds the document is printed out. 6.) Memory usage goes back to 1.2 GByte 7.) On thin client: User can work *normally* The others thin clients works normally in this example, but in case the memory consumption goes over 2 GByte, the server starts to use the swap, then the other clients get slow. Philipp Jim Kronebusch schrieb: > The list wouldn't let my message through with the attachments, so below is at > least the > text of my reply. To reproduce yourself just create a new Writer document > and insert 5 > graphics on a single page, then print, things should get funky on you. > > Scott, I sent you an email personally with attachments to use in testing. > > Jim > > >> Can you create a document, send it to me, so I can try to reproduce here? >> >> What kind of graphics cards do you have in the client? >> >> Scott >> > > Let me know if the attachments don't go through. I have attached 2 > documents, one in > odt format and the other created in OpenOffice and saved as a .doc (student > wanted to > take home and work with in Word). Both will freeze any of our clients when > printed to a > HP4000. I did have better luck when printing to a HP4500 Color, maybe > attributable to > more printer memory. However with both the client still popped up the > graphics from > within the document all over the screen and slowed tremendously. When > printing to the > HP4500 the client didn't freeze, but left stray graphics all over the screen. > I did > print the same documents from a full independent Ubuntu Desktop without any > problems. > The document named german.doc was the original document the student created > the led me > to the problem. > > The clients are DevonIT 6020p's (we have 108 of these). Below is a snip from > the > xorg.conf generated on the client: > > Section "Device" > Identifier "VIA Technologies, Inc. VT8623 [Apollo CLE266] > integrated > CastleRock graphics" > Driver "via" > BusID "PCI:1:0:0" > EndSection > > I don't have a client in front of me to tell you the model or who made it, > but I can > verify that I have had the cover off one before and the chips matched the > info above. > > The clients have 800Mhz Cpu's and 128MB RAM. I also have NBD-Swap set to > 256MB. Hope > this all helps. > > Jim > ------- End of Forwarded Message ------- > > -- SchoolNet NA - Youth Empowerment through Information and Communication Technology SchoolNet Namibia provides sustainable, low cost technology solutions and internet access, as well as technical support, training services and rich educational content to schools, community-based educational organisations, and educational practitioners throughout Namibia. www.schoolnet.na toll free number: 0800 005793 Philipp Hanselmann [EMAIL PROTECTED] tel +264 (0)66 267134 fax +264 (0)66 267135 cell +264 (0)85 5611314 -- edubuntu-users mailing list [email protected] Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/edubuntu-users
