hmmmm I have run some clients on window mode, since I have to watch xrestop. And they were the ones that did not hung up, OK I'll this later.
On 10/4/07, Philipp Hanselmann <[EMAIL PROTECTED]> wrote: > jbarry schrieb: > > Hello Guys! > > > > First of all thanks the flash based webpages have sound now. > > > > I was investigating the hanging programs, but i am still at loss. > > > > I started my focus on gcompris since it seems to the most in need by > > the school preschoolers and Grades 1 - 3. (some faculty members are > > suggesting we go windows since they have an educational program at > > home that maybe used, I declined saying we have some good programs in > > linux also, and that we can't install pirated software.) > > > > I observed that only about 12 clients can run gcompris reasonably > > while the others would crawl, the server would also run so slowly. > > watching htop on the server the memory consumption would reach about > > 1600 mb (not yet eating swap) but the two processors would maintain > > 100% > > > > watching xrestop on the clients (i'm not so good at using it yet) for > > the clients that can run gcompris the pixmap memory is very low, while > > I can not observe xrestop on the hanging computers since they would > > not respond anymore to my keystrokes. > > > > as for the xsession-error I cannot get a sense it any of it, I copied > > these are hoping that they maybe of some relevance. > > > > ** (process:2320): WARNING **: config_file > > /home/guest04/.gcompris/gcompris.conf > > > > ** (process:2320): WARNING **: Binary relocation disabled > > ** Message: gc_locale_set '' > > > > > > ** (gcompris:2320): WARNING **: Requested locale '' got 'en_US.UTF-8' > > package_data_dir = /usr/share/gcompris/boards > > package_locale_dir = /usr/share/locale > > package_plugin_dir = /usr/lib/gcompris > > package_python_plugin_dir= /usr/share/gcompris/python > > X Error: BadDevice, invalid or uninitialized input device 167 > > Major opcode: 144 > > Minor opcode: 3 > > Resource id: 0x0 > > Failed to open device > > X Error: BadDevice, invalid or uninitialized input device 167 > > Major opcode: 144 > > Minor opcode: 3 > > Resource id: 0x0 > > Failed to open device > > DCOPClient::attachInternal. Attach failed Could not open network socket > > X Error: BadDevice, invalid or uninitialized input device 167 > > Major opcode: 144 > > Minor opcode: 3 > > Resource id: 0x0 > > Failed to open device > > X Error: BadDevice, invalid or uninitialized input device 167 > > Major opcode: 144 > > Minor opcode: 3 > > Resource id: 0x0 > > Failed to open device > > kbuildsycoca running... > > X Error: BadDevice, invalid or uninitialized input device 167 > > Major opcode: 144 > > Minor opcode: 3 > > Resource id: 0x0 > > Failed to open device > > X Error: BadDevice, invalid or uninitialized input device 167 > > Major opcode: 144 > > Minor opcode: 3 > > Resource id: 0x0 > > Failed to open device > > X Error: BadDevice, invalid or uninitialized input device 167 > > Major opcode: 144 > > Minor opcode: 3 > > Resource id: 0x0 > > Failed to open device > > X Error: BadDevice, invalid or uninitialized input device 167 > > Major opcode: 144 > > Minor opcode: 3 > > Resource id: 0x0 > > Failed to open device > > > > ** (process:16575): WARNING **: config_file > > /home/guest04/.gcompris/gcompris.conf > > > > ** (process:16575): WARNING **: Binary relocation disabled > > ** Message: gc_locale_set '' > > > > > > ** (gcompris:16575): WARNING **: Requested locale '' got 'en_US.UTF-8' > > package_data_dir = /usr/share/gcompris/boards > > package_locale_dir = /usr/share/locale > > package_plugin_dir = /usr/lib/gcompris > > package_python_plugin_dir= /usr/share/gcompris/python > > ICE default IO error handler doing an exit(), pid = 10085, errno = 0 > > The application 'nm-applet' lost its connection to the display > > localhost:13.0; > > most likely the X server was shut down or you killed/destroyed > > the application. > > The application 'evolution-alarm-notify' lost its connection to the > > display localhost:13.0; > > most likely the X server was shut down or you killed/destroyed > > the application. > > Xsession: X session started for guest04 at Tue Oct 2 10:18:39 PHT 2007 > > SESSION_MANAGER=local/spedhost:/tmp/.ICE-unix/28199 > > > > ** (update-notifier:28420): WARNING **: not starting because user is > > not in admin group > > > > evolution-alarm-notify-Message: Setting timeout for 78073 1191369600 > > 1191291527 > > evolution-alarm-notify-Message: Wed Oct 3 08:00:00 2007 > > > > evolution-alarm-notify-Message: Tue Oct 2 10:18:47 2007 > > > > > > > May this helps... > > I wasn't able to run gcompris at all (LDM_DIRECTX=true). > > I had always this errror messages in .xsession-errors: > The program gcompris receiving an X Window System error. > This probably reflects a bug in the program. > The error was 'XF86VidModelClientBotLocal' > > Now I have preconfigured gcompris that the window doesn't run in full > screen, since than gcompris is working. > > Have tryed to run gcompris in window mode? May the performance is better? > > Philipp > . > > -- edubuntu-users mailing list [email protected] Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/edubuntu-users
