Howard Fleming wrote: > I have the Endian 2 release running on a 500 mhz PIII, 256 megs of ram, > and a 18 gig scsi-2 hd running on a Flashpoint scsi controller. > > The install went fairly well (once I installed a scsi cdrom in them > machine, it refused to boot off of the ide cdrom that was in it). > > Problem that I am running into is once I start to define rules to allow > traffic out from my internal network to the internet, I loose the gui > web i/f to configure the system. Sometimes I can get in to look at > it/make changes, but most of the time I can not. > > The proxy is also not reliable at all, most of the time the browser (IE, > Firefox and Opera) comes back and tells me the proxy is refusing > connections (no passwords or restrictions set on proxy use). > >
Have ssh'd into the Box while you are doing this? I'm just wondering if you are somehow losing the connection of the internal internal nic. This is really the best thing to do since you can check and see if the nic is up and best of all you can tcpdump to see if traffic is moving around. Unrelated to you problem but I noticed a problem when the external nic was down or not set to something valid and you tried to reconfigure from the GUI then no NIC's appeared in the selection box of the GUI, and if you go ahead with the Network configuration like this you end up messing up all the network settings. [That is the bridge devices have no idea what eth to attach to and then nothing works.] -Mike ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Efw-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/efw-user
