had the same problem. after having setup box i went to console and did for each interface
ifconfig ethX up after that, i had every interface in the configuration window. hope that helps. regards, mario Bernard038 wrote: > > Hi All, > > I am starting to configure EFW. When i check the FW itself i can see the > NIC's installed on the machine (eth0, eth1,eth2 and br0, the bridge) When > i start the webbased network wizard, in step 1 I see 3 available NIC's. > BUT when in the wizard i have to SELECT a NIC, i cannot, the fields where > i should select the NICs are empty. I cannot select a NIC and of course i > cannot link a NIC to a zone. > > During boot the NIC are recognized by efw and, as said before, on the fw > itself i can configure the NICs using ifconfig. > > I have given the NICs IP-adresses the NICs got an adress in the > 192.168.10.x range, the bridge had a adress in the 192.168.0.x range. This > also didn't help. > > Does anyone has a solution? > > Regards, > > b. > -- View this message in context: http://www.nabble.com/Problem-configuring-NICs-on-EFW-tf2812927.html#a7856606 Sent from the efw-user mailing list archive at Nabble.com. ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Efw-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/efw-user
