There are the same problems under XEN.
I configured the firewall manually within the config files.
See an example in my wiki
http://www.neobiker.de/wiki/index.php?title=Endian_Firewall_in_DomU
Hope that helps
neobiker
the-net wrote:
>
> had the same problem.
>
> after having setup box i went to console and did for each interface
>
> ifconfig ethX up
>
> after that, i had every interface in the configuration window.
>
> hope that helps.
>
> regards,
> mario
>
>
>
> Bernard038 wrote:
>>
>> Hi All,
>>
>> I am starting to configure EFW. When i check the FW itself i can see the
>> NIC's installed on the machine (eth0, eth1,eth2 and br0, the bridge) When
>> i start the webbased network wizard, in step 1 I see 3 available NIC's.
>> BUT when in the wizard i have to SELECT a NIC, i cannot, the fields where
>> i should select the NICs are empty. I cannot select a NIC and of course i
>> cannot link a NIC to a zone.
>>
>> During boot the NIC are recognized by efw and, as said before, on the fw
>> itself i can configure the NICs using ifconfig.
>>
>> I have given the NICs IP-adresses the NICs got an adress in the
>> 192.168.10.x range, the bridge had a adress in the 192.168.0.x range.
>> This also didn't help.
>>
>> Does anyone has a solution?
>>
>> Regards,
>>
>> b.
>>
>
>
--
View this message in context:
http://www.nabble.com/Problem-configuring-NICs-on-EFW-tf2812927.html#a7861488
Sent from the efw-user mailing list archive at Nabble.com.
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Efw-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/efw-user
