Mike Tremaine wrote: > G M wrote: >> I've started a fresh new install of 2.1, applied Peter's solution and >> finally Mike's updates. >> All have been installed and seems to work, except this.... line on clamav >> log: >> Clamd was NOT notified: Can't connect to clamd through /tmp/clamd >> >> Sure !! /tmp/clamd does not exists... socket no longer exists. >> >> any help ? >> > > Restart clamd. Use "/usr/local/bin/restartclamav" Or try to start clamd > by hand "/usr/sbin/clamd" to see if it kicks out an error. > > -Mike > >
PS - If you've been trying to reach my updates today and failed try again. Covad [my ISP] had some savage 6 hours outage [not real happy about that :/].. For the person wondering how to update go here http://www.stellarcore.net/projects/endian/ Read the short blurb on using "rpm -Uvh http://...."; Good luck. [Search the mail list archive also it has all been covered in detail.] -Mike ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Efw-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/efw-user
