Greetings all, I have two Endian community edition firewalls and am using OpenVPN Net2Net in routed mode to connect a branch office to the main office. Here is my network...
194.0.0.0/24 -- main_fw -- Internet -- branch_fw -- 10.0.0.0/24 The IPs have been changed to protect the little bits, but the main office really does have a public class C IP range that we keep private, and the branch office really does subnet a class A private network. I've stepped through the OpenVPN Net2Net setup. The main_fw acts as the server. The branch_fw acts as the client and connects successfully. Pings are successful from a host on the main 194.0.0.0/24 network to a host on the branch 10.0.0.0/24 network, but not visa versa. Pings from a host on the branch 10.0.0.0/24 network to a host on the main 194.0.0.0/24 network fail. However, if I logon to the branch_fw via SSH and attempt the same ping it succeeds. The branch_fw is the default route for hosts at that site. The only other piece of relevant information that comes to mind is that the branch_fw had previously been configured with an IPSEC connection to a commercial firewall at the main site. Any thoughts? Lane Beneke Network Administrator Southern Piping Co. Wilson, NC, USA ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Efw-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/efw-user
