Hi, I'm testing the latest Community build for Endian, specifically its ability to do WAN Failover.
I am testing it in my office environment by connecting two different NICs to my modem as I have 5 static IPs and configuring each NIC with one of my static IPs. I have configured an additional uplink in the "interfaces" section and specified the "main uplink" to failover to the secondary link and they are both managed. Its not working, I've tried the main and the secondary doesn't take over immediately. Is there a write-up somewhere on how to do this as I can't find anything anywhere and can't figure out if I just have to have two different WAN connections and somehow the Endian sees that I am on the same WAN subnet when trying to failover and so it doesn't work but I don't know!? Any clues? Thanks. Jon ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ Efw-user mailing list Efw-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/efw-user
