Currently setting up a new install of Endian with a single green and dual
red. I want to direct the traffic through the reds based on port (protocol).
IE SMTP, POP, Etc via WAN1; HTTP, HTTPS, Etc via WAN2. I setup the Firewall
rule to handle the direction but the HTTP via the WAN2 will not respond. I
set the rule to use WAN1 and it works perfect? Is there more to the setup
beyond Firewall rules?
All the internal systems point to Endian as the single gateway. Both WANs
are the same ISP. Only difference is one has a static block of IPs. the
second is a standard DSL config with a dynamic ip assigned to the modem.
Any help or direction would be appreciated greatly.
------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________
Efw-user mailing list
Efw-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/efw-user
