Hello all! I am having problems starting Endian 2.3 Community Edition on a 3ware 9650SE-2LP Controller. The installation finishes without any problem but once the system boots the error message is:
Uncompressing Linux... Ok, booting the kernel. Mounting tmpfs on /dev mkrootdev: UUID xxxxxxxxx mount: error 2 mounting ext3 flags noatime well, retrying without the option flags mount: error 2 mounting ext3 well, retrying read-only without any flag mount: error 2 mounting ext3 ERROR opening /dev/console!!!!: 2 switchroot: mount failed: 22 Kernel panic - not syncing: Attempted to kill init! Rebooting in 10 seconds.. I tried connecting a hard drive directly to the motherboard and I managed to install and run 2.3 without a problem so the general setup of the box is no problem. What makes the issue even more interesting is the fact that when installing the 2.2 version I have no problems installing and booting. Version 2.2 runs flawlessly. Was something changed in 2.3 so the there is no more support for this controller? Thank you for any help/tips! Vassilis ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Efw-user mailing list Efw-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/efw-user
