Hi, I'm having a problem integrating Ekiga to a Cisco Call Manager Environment. I have the following setup: Cisco Call Manager 5.0(4) as the SIP proxy, Suse 10.1 in a workstation and Ekiga 2.0.2 as the Softphone.
I'm able to register Ekiga to CCM5 and receive calls from other registered phones (Cisco SCCP phones and other SIP softphones, such as Xlite). The problem is, that i'm not able to make calls with Ekiga through CCM5. I've analyzed the SIP traffic between Ekiga and CCM5 with Wireshark, and tried to compare the traces from Ekiga to the traces from X-lite (X-lite and some other SIP softphones seem to work correctly against CCM5). I've found out that the working SIP softphones do the following: 1. send an INVITE-message with SDP to CCM5 2. receive a status:401 UNAUTHORIZED message from CCM5 3. send another INVITE-message with digest authentication information to CCM5 4. the call goes through With Ekiga: 1. send an INVITE-message with SDP to CCM5 2. Receive an status:500 Internal Server Error -message from CCM5 (there's the following field in SIP message, warning:routing failed ccbid=502 socket=10.0.103.129:5089) This a messy explanation, but i'm desperate to find out what's the problem or at least narrow it a little bit. Has anyone here experience with integrating Ekiga to a Cisco Call Manager environment? Or, can you advise me what could the problem be related with (Codecs, other Ekiga settings etc.), and what should i further investigate to find a solution? Best Regards, Antti _______________________________________________ ekiga-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/ekiga-list
