Le mardi 26 septembre 2006 à 13:20 +0300, [EMAIL PROTECTED] a écrit : > Hi, > > I'm having a problem integrating Ekiga to a Cisco Call Manager Environment. I > have the following setup: Cisco Call Manager 5.0(4) as the SIP proxy, Suse > 10.1 > in a workstation and Ekiga 2.0.2 as the Softphone. > > I'm able to register Ekiga to CCM5 and receive calls from other registered > phones (Cisco SCCP phones and other SIP softphones, such as Xlite). The > problem > is, that i'm not able to make calls with Ekiga through CCM5. I've analyzed the > SIP traffic between Ekiga and CCM5 with Wireshark, and tried to compare the > traces from Ekiga to the traces from X-lite (X-lite and some other SIP > softphones seem to work correctly against CCM5). > > I've found out that the working SIP softphones do the following: > 1. send an INVITE-message with SDP to CCM5 > 2. receive a status:401 UNAUTHORIZED message from CCM5 > 3. send another INVITE-message with digest authentication information to CCM5 > 4. the call goes through > > With Ekiga: > 1. send an INVITE-message with SDP to CCM5 > 2. Receive an status:500 Internal Server Error -message from CCM5 (there's the > following field in SIP message, warning:routing failed ccbid=502 > socket=10.0.103.129:5089) > > This a messy explanation, but i'm desperate to find out what's the problem or > at > least narrow it a little bit. Has anyone here experience with integrating > Ekiga > to a Cisco Call Manager environment? Or, can you advise me what could the > problem be related with (Codecs, other Ekiga settings etc.), and what should i > further investigate to find a solution? >
Can you post a -d 4 output somewhere? -- _ Damien Sandras (o- //\ Ekiga Softphone: http://www.ekiga.org/ v_/_ FOSDEM 2006 : http://www.fosdem.org/ SIP Phone : sip:[EMAIL PROTECTED] sip:[EMAIL PROTECTED] _______________________________________________ ekiga-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/ekiga-list
