On Sat, 2009-02-14 at 11:38 +0100, Damien Sandras wrote: > Le samedi 14 février 2009 à 10:48 +1000, Bas Driessen a écrit : > > Hello, > > > > I am using Ekiga 3.0.2 on Fedora 10 x86_64 (64 bit). I have a VoIP > > account with my internet provider and I have setup Ekiga to use that > > and that all works fine. However, within a couple of minutes, the > > incoming calls do not work anymore. It goes straight to the voice > > mail. If I de-register and register again, all works again for a > > minute or 2 and then same problem. Outgoing calls are fine and stable. > > > > What can be a possible cause and/or what can I do to further > > investigate. To eliminate the fact that it is not a > > router/infrastructure etc issue, I have tested with Twinkle. This > > package seems stable both incoming as outgoing. So the issue appears > > to be with Ekiga. > > > > How can I see how I am registered in Ekiga? I want to see something > > like this: <sip:[email protected]>;q=0.500;expires=360. As > > outgoing calls still work, registration must perhaps get confused > > somehow and change to something like: > > <sip:[email protected]>;q=0.500;expires=360 (I am only > > guessing) meaning that I am still connected to a sip server, but not > > linked anymore to the incoming number. > > > > Any ideas/tips/hints/solutions are appreciated. > > Perhaps the NAT binding on the router is closed. > > We send a 'probe' every 10 seconds to keep it alive. > > Perhaps you could try sending a probe every 3 seconds. To change this, > you can edit the following key : > /apps/ekiga/protocols/sip/binding_timeout > using gconftool or gconf-editor. > > Do not edit the config files manually, it won't work.
Thanks Damien. Tried that, but it did not work unfortunately. Fedora release ekiga-3.0.2-2.fc10 update yesterday. Updated and also no change. Is it possible that the problem is on the provider site? If so, which value/setting should I ask them to set/use? Anything else in Ekiga I can set. Proxy for instance? Can I edit STUN settings in Ekiga? Any other ideas? Thanks again. Bas.
_______________________________________________ ekiga-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/ekiga-list
