On Sat, 2009-02-14 at 23:06 +1000, Bas Driessen wrote: > On Sat, 2009-02-14 at 11:38 +0100, Damien Sandras wrote: > > > Le samedi 14 février 2009 à 10:48 +1000, Bas Driessen a écrit : > > > Hello, > > > > > > I am using Ekiga 3.0.2 on Fedora 10 x86_64 (64 bit). I have a VoIP > > > account with my internet provider and I have setup Ekiga to use that > > > and that all works fine. However, within a couple of minutes, the > > > incoming calls do not work anymore. It goes straight to the voice > > > mail. If I de-register and register again, all works again for a > > > minute or 2 and then same problem. Outgoing calls are fine and stable. > > > > > > What can be a possible cause and/or what can I do to further > > > investigate. To eliminate the fact that it is not a > > > router/infrastructure etc issue, I have tested with Twinkle. This > > > package seems stable both incoming as outgoing. So the issue appears > > > to be with Ekiga. > > > > > > How can I see how I am registered in Ekiga? I want to see something > > > like this: <sip:[email protected]>;q=0.500;expires=360. As > > > outgoing calls still work, registration must perhaps get confused > > > somehow and change to something like: > > > <sip:[email protected]>;q=0.500;expires=360 (I am only > > > guessing) meaning that I am still connected to a sip server, but not > > > linked anymore to the incoming number. > > > > > > Any ideas/tips/hints/solutions are appreciated. > > > > Perhaps the NAT binding on the router is closed. > > > > We send a 'probe' every 10 seconds to keep it alive. > > > > Perhaps you could try sending a probe every 3 seconds. To change this, > > you can edit the following key : > > /apps/ekiga/protocols/sip/binding_timeout > > using gconftool or gconf-editor. > > > > Do not edit the config files manually, it won't work. > > > Thanks Damien. Tried that, but it did not work unfortunately. Fedora > release ekiga-3.0.2-2.fc10 update yesterday. Updated and also no > change. > > Is it possible that the problem is on the provider site? If so, which > value/setting should I ask them to set/use? > > Anything else in Ekiga I can set. Proxy for instance? Can I edit STUN > settings in Ekiga? Any other ideas? > > Thanks again. >
Can the following be an issue? It looks to me it is retrying something 3 times and then give up? (note, I have changed my real SIP number for a dummy number for obvious privacy reasons) 2009/02/14 23:57:15.447 10:59.032 Housekeeper:0x3ef66950 SIP Starting PUBLISH for offline retry 2009/02/14 23:57:15.447 10:59.032 Housekeeper:0x3ef66950 SIP Expiry time for PUBLISH set to 500 seconds. 2009/02/14 23:57:15.515 10:59.100 Housekeeper:0x3ef66950 SIP Transaction remote address is udp$203.2.134.1:5060 2009/02/14 23:57:15.515 10:59.100 Housekeeper:0x3ef66950 SIP Sending PDU PUBLISH sip:[email protected] (881 bytes) to: rem=udp $203.2.134.1:5060,local=udp$59.167.214.42:5060,if=192.168.1.14%br0 2009/02/14 23:57:15.516 10:59.101 Housekeeper:0x3ef66950 SIP Expiry time for PUBLISH set to 500 seconds. 2009/02/14 23:57:15.553 10:59.138 Housekeeper:0x3ef66950 SIP Transaction remote address is udp$203.2.134.1:5060 2009/02/14 23:57:15.553 10:59.138 Housekeeper:0x3ef66950 SIP Sending PDU PUBLISH sip:[email protected] (881 bytes) to: rem=udp $203.2.134.1:5060,local=udp$192.168.122.1:5060,if=192.168.122.1%virbr0 2009/02/14 23:57:15.592 10:59.177 Opal Liste...0x3ef25950 OpalUDP Binding to interface: 59.167.214.42:5060 2009/02/14 23:57:15.592 10:59.177 Opal Liste...0x3ef25950 SIP No Content-Length present from udp$203.2.134.1:5060<if=udp $59.167.214.42:5060>, reading till end of datagram/stream. 2009/02/14 23:57:15.592 10:59.177 Opal Liste...0x3ef25950 SIP PDU 405 Method Not Allowed received: rem=udp$203.2.134.1:5060,local=udp $59.167.214.42:5060,if=192.168.1.14%br0 2009/02/14 23:57:15.593 10:59.178 Opal Liste...0x3ef25950 SIP Transaction 39 PUBLISH completed. 2009/02/14 23:57:15.593 10:59.178 Opal Liste...0x3ef25950 Opal Transport clean up on termination 2009/02/14 23:57:15.947 10:59.532 Housekeeper:0x3ef66950 SIP Transaction 40 PUBLISH timeout, making retry 1 2009/02/14 23:57:15.948 10:59.533 Housekeeper:0x3ef66950 SIP Sending PDU PUBLISH sip:[email protected] (881 bytes) to: rem=udp $203.2.134.1:5060,local=udp$192.168.122.1:5060,if=192.168.122.1%virbr0 2009/02/14 23:57:16.594 11:00.179 Housekeeper:0x3ef66950 SIP Set state Terminated_Success for transaction 39 PUBLISH 2009/02/14 23:57:16.947 11:00.532 Housekeeper:0x3ef66950 SIP Transaction 40 PUBLISH timeout, making retry 2 2009/02/14 23:57:16.948 11:00.533 Housekeeper:0x3ef66950 SIP Sending PDU PUBLISH sip:[email protected] (881 bytes) to: rem=udp $203.2.134.1:5060,local=udp$192.168.122.1:5060,if=192.168.122.1%virbr0 2009/02/14 23:57:18.948 11:02.533 Housekeeper:0x3ef66950 SIP Transaction 40 PUBLISH timeout, making retry 3 2009/02/14 23:57:18.948 11:02.533 Housekeeper:0x3ef66950 SIP Sending PDU PUBLISH sip:[email protected] (881 bytes) to: rem=udp $203.2.134.1:5060,local=udp$192.168.122.1:5060,if=192.168.122.1%virbr0 2009/02/14 23:57:21.447 11:05.032 Housekeeper:0x3ef66950 SIP Set state Terminated_Timeout for transaction 40 PUBLISH Thanks, Bas.
_______________________________________________ ekiga-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/ekiga-list
