Hi, I have not yet installed ELDK5.0, but used ELDK42 extensively. In ELDK42, the compiler is "ppc_85xx-gcc". In ELDK5.0, is it "ppc85xx-gcc"? Please recheck once.
Anyhow, I have started downloading eldk5.0 On Tue, Oct 25, 2011 at 1:12 AM, Johan Moraal <[email protected]>wrote: > Hi > > I need some help using the ELDK. > > I downloaded the following files from your FTP server: > /pub/eldk/5.0/targets/powerpc/ > poky-image-sato-sdk-powerpc.tar.gz > > /pub/eldk/5.0/targets/powerpc/eldk-eglibc-i686-powerpc-toolchain-gmae-5.0.tar.bz2 > /pub/eldk/5.0/targets/powerpc/target.conf > /pub/eldk/5.0/install.sh > > I did not modify install.sh or target.conf > > My host system is Ubuntu 11.10 i686 (32bit). It is running as a > virtual machine with Windows 7 as host. I use Virtual Box 4.1.4 for > virtualisation. > My target processor is the Freescale P1022 with two PPC e500v2 cores. > However, for this excersice compiling for the MPC85xx (e500v1 core) > will suffice > > I used the following commands install ELDK: > > johan@Ubuntu2:~/vmshare/eldk$ sudo ./install.sh powerpc > -------------------------------------------------------------------- > NOTICE: superuser priviledges will be needed to install the > root file system; make sure you have sufficient permissions. > -------------------------------------------------------------------- > *** Installing ./targets/powerpc/poky-image-sato-sdk-powerpc.tar.gz > *** Installing > ./targets/powerpc/eldk-eglibc-i686-powerpc-toolchain-gmae-5.0.tar.bz2 > johan@Ubuntu2:~/vmshare/eldk$ > > The installation completed without any errors. A folder /opt/eldk-5.0 > was created in my filesystem > > After installation I did the following: > > johan@Ubuntu2:~/vmshare$ CROSS_COMPILE=ppc85xx- > johan@Ubuntu2:~/vmshare$ export CROSS_COMPILE > johan@Ubuntu2:~/vmshare$ > > PATH=$PATH:/opt/eldk-5.0/powerpc/rootfs/usr/bin:/opt/eldk-5.0/powerpc/rootfs/bin > johan@Ubuntu2:~/vmshare$ printenv PATH > > /usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/opt/eldk-5.0/powerpc/rootfs/usr/bin:/opt/eldk-5.0/powerpc/rootfs/bin > johan@Ubuntu2:~/vmshare$ > > As I understand it, ELDK should now be properly installed. To test it, > I have a small test file I wish to compile: test.c > > I used the following command to compile (Note that I use the -S option > because I want an .s assembly output file instead of an object file.) > > johan@Ubuntu2:~/vmshare$ ${CROSS_COMPILE}gcc -S test.c > ppc85xx-gcc: command not found > > Alternatively I tried: > > johan@Ubuntu2:~/vmshare$ /opt/eldk-5.0/powerpc/rootfs/usr/bin/gcc -S > test.c > bash: /opt/eldk-5.0/powerpc/rootfs/usr/bin/gcc: cannot execute binary file > > Keep in mind that I have very little Linux experience. > > As you can see I am unable to cross compile > > Can you please assist? > > -- > Johan > _______________________________________________ > eldk mailing list > [email protected] > http://lists.denx.de/mailman/listinfo/eldk > -- Regards, Radha Krishna "Find out what makes you happy and go behind it"
_______________________________________________ eldk mailing list [email protected] http://lists.denx.de/mailman/listinfo/eldk
