Hi, First, please do not top-post. Thanks!
On Tue, 27 Dec 2011 12:55:17 -0200 Érico Porto <[email protected]> wrote: > did a > > erico@050278:~/Downloads/u-boot-2011.12-rc3$ make clean > erico@050278:~/Downloads/u-boot-2011.12-rc3$ source > /opt/eldk-5.1/powerpc-softfloat/environment-setup-powerpc-nf-linux > erico@050278:~/Downloads/u-boot-2011.12-rc3$ export > CROSS_COMPILE=powerpc-linux- > erico@050278:~/Downloads/u-boot-2011.12-rc3$ make mpc832xemds_config > Configuring for MPC832XEMDS board... > erico@050278:~/Downloads/u-boot-2011.12-rc3$ make all > > still getting > > make[1]: Entering directory > `/home/erico/Downloads/u-boot-2011.12-rc3/common' > make[1]: *** No rule to make target > `/home/erico/Downloads/u-boot-2011.12-rc3/include/asm/system.h', Needed by > `cmd_bdinfo.o'. Stop. > make[1]: Leaving directory `/home/erico/Downloads/u-boot-2011.12-rc3/common' > make: ** [common/libcommon.o] Error 2 Hm, it builds without issues here, both U-Boot v2011.12-rc3 and v2011.12. Seems something is wrong with your U-Boot source. Why are you using v2011.12-rc3? Can you please try using v2011.12 which has been released last week [1]. Best regards, Anatolij [1] ftp://ftp.denx.de/pub/u-boot/u-boot-2011.12.tar.bz2 _______________________________________________ eldk mailing list [email protected] http://lists.denx.de/mailman/listinfo/eldk
