You are right! It works flawless now using the real v2011.12 ! Thanks!
Érico V. Porto On Tue, Dec 27, 2011 at 1:14 PM, Anatolij Gustschin <[email protected]> wrote: > Hi, > > First, please do not top-post. Thanks! > > On Tue, 27 Dec 2011 12:55:17 -0200 > Érico Porto <[email protected]> wrote: > > > did a > > > > erico@050278:~/Downloads/u-boot-2011.12-rc3$ make clean > > erico@050278:~/Downloads/u-boot-2011.12-rc3$ source > > /opt/eldk-5.1/powerpc-softfloat/environment-setup-powerpc-nf-linux > > erico@050278:~/Downloads/u-boot-2011.12-rc3$ export > > CROSS_COMPILE=powerpc-linux- > > erico@050278:~/Downloads/u-boot-2011.12-rc3$ make mpc832xemds_config > > Configuring for MPC832XEMDS board... > > erico@050278:~/Downloads/u-boot-2011.12-rc3$ make all > > > > still getting > > > > make[1]: Entering directory > > `/home/erico/Downloads/u-boot-2011.12-rc3/common' > > make[1]: *** No rule to make target > > `/home/erico/Downloads/u-boot-2011.12-rc3/include/asm/system.h', Needed > by > > `cmd_bdinfo.o'. Stop. > > make[1]: Leaving directory > `/home/erico/Downloads/u-boot-2011.12-rc3/common' > > make: ** [common/libcommon.o] Error 2 > > Hm, it builds without issues here, both U-Boot v2011.12-rc3 and > v2011.12. Seems something is wrong with your U-Boot source. Why are > you using v2011.12-rc3? Can you please try using v2011.12 which has > been released last week [1]. > > Best regards, > Anatolij > > [1] ftp://ftp.denx.de/pub/u-boot/u-boot-2011.12.tar.bz2 >
_______________________________________________ eldk mailing list [email protected] http://lists.denx.de/mailman/listinfo/eldk
