Dear Rama, In message <ca+wf0efoguteczkd9pwnnvxvr3uboz6qzvbf_sdzt4zioqc...@mail.gmail.com> you wrote: > > I am using ZYNQ (ARM Cortex-A9) ZC706 Board. Actually i am installing > ELDK-5.4 based on Reference ELDK Doc But some time Error 127 coming. I > think Proper Export path not defined.
Yes. This results from the fact that you ignore the instructions how to work with ELDK v5.x > export > PATH=/opt/eldk-5.4/armv7a-hf/sysroots/i686-eldk-linux/usr/bin:/opt/eldk-5.4/armv7a-hf/sysroots/i686-eldk-linux/usr/bin/arm-xilinx-linux-gnueabi-:$PATH > export ARCH=arm > export CROSS_COMPILE=arm-xilinx-linux-gnueabi- You should not do this. > source /opt/eldk-5.4/armv7a-hf/environment-setup-* This is OK, and this is all you need to do. > echo > 'PATH=$PATH:/opt/eldk5.4/armv7a-hf/sysroots/i686-eldk-linux/usr/bin:/opt/eldk-5.4/armv7a-hf/sysroots/i686-eldk-linux/bin/ > export CROSS_COMPILE="arm-xilinx-linux-gnueabi-" > export ARCH=arm' > setup_eldk & chmod u+x setup_eldk You MUST NOT do that, as you overwrite the settings made by the environment script. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] Q: Why do PCs have a reset button on the front? A: Because they are expected to run Microsoft operating systems. _______________________________________________ eldk mailing list [email protected] http://lists.denx.de/mailman/listinfo/eldk
