Dear Rama Chandra, In message <ca+wf0ehi_b9yp-lqmduaandq4jqkwgeorzyzsmquvezm+o8...@mail.gmail.com> you wrote: > > I am using ELDK-5.4 for ZYNQ ZC706 Board. Presently i am installed ELDK-5.4 > and now some problems are coming in u-boot running time. other persons > given some suggestions but same failures are coming could you give any > other solutions. > ram@caravel:~/Desktop/ZYNQ/uboot-xilinx-v14.5$ eldk-switch.sh -l > ,+--- Installed ELDK versions: > eldk 4.2: /opt/eldk ppc_4xx > eldk 4.2: /opt/eldk42 ppc_4xxFP > eldk 5.4: /opt/eldk-5.4 armv7a-hf > ram@caravel:~/Desktop/ZYNQ/uboot-xilinx-v14.5$ eldk-switch.sh -m armv7a-hf > eldk-switch.sh: ELDK 5.2 for armv7a-hf is not installed! > ram@caravel:~/Desktop/ZYNQ/uboot-xilinx-v14.5$ eldk-switch -m armv7a-hf > eldk-switch.sh: ELDK 5.2 for armv7a-hf is not installed!
You should really learn to read documentation - in this case [1] Actually you are SUPPOSED to read the documentation BEFORE posting. You make at least to errors here: 1) You are not supposed to run "eldk-switch.sh". You should define a shell function "eldk-switch" as described and use that. 2) "eldk-switch -h" will give you usage information; if you do not want to use the default ELDK version, you MUST provide the "-r <release>". But really, all of this is explained in detail in the documentation. Please RTFM ! [1] http://www.denx.de/wiki/view/ELDK-5/WebHome#Section_1.8.3. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] A stone was placed at a ford in a river with the inscription: "When this stone is covered it is dangerous to ford here." _______________________________________________ eldk mailing list [email protected] http://lists.denx.de/mailman/listinfo/eldk
