Hi Steve: At 11:04 PM 6/25/04, Steve Jackson wrote:
At Field Day, if you will be using your K2 with the KPA100 ... note that the radio's high-current DC port is 180 degrees reversed from the national ARES standard:
I believe you're mistaken pal. The KPA100 APP connector match IDENTICALLY the examples shown at http://www.ocraces.org/powerpole.html and http://home.comcast.net/~buck0/app.htm.
The link at http://www.westmountainradio.com/pdf/QSTrr.pdf showed nothing useful.
The illustration on page 41 of the rev. A KPA100 manual matches exactly the illustration at www.ocraces.org... and the illustrations on pages 29 & 38 of the rev. A manual match IF you recognize that you're looking at the UNDER of the PC board instead of the top... well, at least it's the bottom SIDE when it's installed INSIDE the K2 and had been turned upside down for that installation... thus making the actual TOP of the PC board the under side...
Don't go changing ANYTHING until you've DOUBLE-CHECKED yourself again. 73, Tom Hammond N0SS _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
