I'm sure it's the standard as I would think EF Johnson Radios got it right and most of their LMR radios use the connector and it's wired identical. I know because I wanted an extra harness for each of my cars for the K2 and just took 2 power cable kits from Johnson off the shelf and let her rip...
Gregg R. Lengling, W9DHI, Retired Administrator http://www.milwaukeehdtv.org K2/100 S#3075 KX1 S# 57 Member: ARRL, RSGB, RCA, WERA and ORC -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of wayne burdick Sent: Saturday, June 26, 2004 1:26 AM To: Elecraft Reflector Cc: Steve Jackson Subject: [Elecraft] KPA100 DC connectors do match the standard We were very careful to ensure that the KPA100's APP connectors matched the emerging standard orientation. I believe it is correct, but I'll review it again just to be certain. (We've been selling the KPA100 for quite a while now with noone raising this issue, which is a good sign!) Thanks, Wayne N6KR --- http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
