I'm pretty sure I've made the same mistake during my build process. Thanks for the tip!
-- "It takes brains. It's not like forward, where you can get away with scoring and not play defense... On defense you have to be thinking." ---Chris Chelios David M. Katinsky [EMAIL PROTECTED] N2RDT > From: Robert McGwier <[EMAIL PROTECTED]> > Date: Mon, 28 Jun 2004 14:02:29 +0000 > To: Elecraft Mail <Elecraft@mailman.qth.net> > Subject: [Elecraft] Field Day report > > The other gotcha for me is reading what to do with the > 4.7 pf on the back edge stuck in as a hole filler where > a three pin jumper goes. I would change the instruction > manual to read: If looking from at the RF board from > the front panel side, then left pin is 1 and right pin 3, > solder the capacitor into holes 1 and 3. I put it in the > pins near the OUTER EDGE, misinterpreting the instructions. _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com