Scott, If you aren't seeing anything on LCD display, go back and check the soldering on the display. The pins are not really long enough and just barely protrude through the board. I had a problem with part of my LCD and that was the problem. You may want to solder from the top of the board to ensure you have contact with the circuit board.
Bob WB6KWT ----- Original Message ----- From: "Scott Cashel" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, July 29, 2004 9:55 AM Subject: [Elecraft] K2 Troubleshooting Good Day, I have completed the assembly of the control board, front panel, and initial rf board and assembled same. On power up the background illuminates and some clicking occurs but nothing else. I have disassembled and rechecked component locations and retouched the solder connections several times. Although I can find nothing wrong I obviously have made errors somewhere. I am not an engineer and I appear to be in over my head. Please Help! Scott Cashel KJ5ME Arlington, TX _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
