Scott, The most common failure point is a solder joint. So first check soldering, then re-check the soldering, and finally check all soldering.
We will need more details of what works and what doesn't (what do you see on the display, what do you hear in the headphones, and under what conditions, etc.) to give further informative advice (at this point we can only guess based on the limited information available). 73, Don W3FPR ----- Original Message ----- From: "Scott Cashel" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, July 29, 2004 12:55 PM Subject: [Elecraft] K2 Troubleshooting Good Day, I have completed the assembly of the control board, front panel, and initial rf board and assembled same. On power up the background illuminates and some clicking occurs but nothing else. I have disassembled and rechecked component locations and retouched the solder connections several times. Although I can find nothing wrong I obviously have made errors somewhere. I am not an engineer and I appear to be in over my head. Please Help! Scott Cashel KJ5ME Arlington, TX _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
