I finally got my problems with N1MM Logger sorted out, only to find that my keying adapter doesn't produce the expected results.
I have a pair of 1N4148 silicon diodes going from the Logger key line to each of the dit and dah lines to the K2. The cathode of each diode goes to the common Logger keying line. My paddles connect directly to the dit and dah lines for paddle keying. The K2 is set to InP PdLn and works fine with the paddles. If I put a closure on the keying line from Logger, though, I get a continuous di-da-di-da-di-da-di. If I set the K2 input to handkey, and connect the Logger key line directly, it works just fine. The K2 is suposed to detect simultaneous closures on the dit and dah lines, and interpret that as a hand key input. Not doing it so far. When I turn on the K2, the firmware versions displayed are 2.03d and 1.07. Anyone have any ideas on how to get this working? Should I be using Germanium diodes instead? 73, Bob N6WG _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
