Ken: It is kind of tricky to get it right. The actions you describe indicate that you have the underline under the InP. The underline can not be under the InP to get this extra feature.
Follow these steps: Tap Menu Then Select (that is, rotate the VFO as needed) - InP PdLn - (or it may read PdLr or HAnd), Depress (HOLD) MENU so that PdLn (or it may read PdLr or HAnd) is underlined (or if you use reverse paddle that PdLr is underlined. Don't leave it in Hand as this is pure Straight Key. If it reads HAnd rotate the VFO to PdLn or PdLr.) The underline can not be under the InP!!!! Now tap DISPLAY. You should briefly see " AdEt " and either OFF or On. Tap DISPLAY again if you need to so that the last display you saw is AdEt On. (It toggles each time you tap DISPLAY.) Then exit the menu (tap Menu key). I have found that sometimes I need to shut off "auto-detect" as I squeeze the two paddles together at exactly the same time and thus get a long dah rather than di dah di dah di dah. Rich, KE0X -----Original Message----- From: KEN N4SO [mailto:[EMAIL PROTECTED] Sent: Sunday, August 29, 2004 9:47 PM To: [EMAIL PROTECTED] Subject: Re: [Elecraft] External Keying Auto-Detect problem Rich, Mine says Pdln DISPLAY response is SEC Port OFF One problem I have noticed is no keying on insertion of the Bencher paddle key line cable. I have to play around with it before I get any keying. Is this related? Ken N4SO Mobile, AL K2 #3394 ________________________________________________________________ The best thing to hit the Internet in years - Juno SpeedBand! Surf the Web up to FIVE TIMES FASTER! Only $14.95/ month - visit www.juno.com to sign up today! _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
