Hi There are several parts to the KI6WX SSB mods. The 2.5 KHz mod only requires changing some capacitors on the SSB board in the crystal filter area. The mod that is affecting the ALC is a separate mod for increasing the gain for low output mics and involves adding a transistor and rewiring the toroids. You do not need to do the changes below if you have not added the transistor for increased gain.
Don Brown ----- Original Message ----- From: John Huffman<mailto:[EMAIL PROTECTED]> To: [email protected]<mailto:[email protected]> Sent: Tuesday, August 31, 2004 6:12 PM Subject: Re: [Elecraft] K2 ALC Anomaly Using PTT I'm planning to do the KI6WX mod for 2.5khz SSB bandwidth. - I'm wondering where is a good source for the capacitors. - I assume my January 2003 K2 (3194) doesn't need new crystals. - Since my K2 is a K2/100 is there a mod, as listed below, that is needed? > I have installed the two resistors in the mod that Gary told me about, and > the K2/100 ALC now works as it should. I am now going to do Gary's mod to my > other K2/100 since it also has the KI6WX mods installed on the KSB2 board. 73 de NA8M John _______________________________________________ Elecraft mailing list Post to: [email protected]<mailto:[email protected]> You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft<http://mailman.qth.net/mailman/listinfo/elecraft> Help: http://mailman.qth.net/subscribers.htm<http://mailman.qth.net/subscribershtm> Elecraft web page: http://www.elecraft.com<http://www.elecraft.com/> _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
