Thanks for the input Bob. I think I will order it basically as you suggested including the KAT2 so that it can be used portable without having to swap out anything. I'll also add 160m. If the receiver's as good as everyone says, I don't think I'll need the DSP... I'll also pass on the audio filter since I have an aversion to them.
Since I only have a minibeam here, am height restricted to 35', and like to work DX and play in contests, I'll probably add the external amp after I get the K2 built and running. Eventually I want to build a remote base DX station using the K2 and the solid state linear with a 4el SteppIR... but that's a ways off ;-) 73, Larry N8LP ----- Original Message ----- From: Robert C. Abell To: Larry Phipps Cc: [email protected] Sent: Sunday, September 12, 2004 2:43 PM Subject: (Elecraft) Newbie Hi Larry, May I recommend that if you add a linear amp. that you go for the Elecraft KPA100 , it's a very well engineered unit and positively works beautifully with the K2. 100 wats is all you need, believe me. Put your money into a good antenna. I use a Cushcraft A3S Tribander @ 75 ft.for 20, 15, & 10 and a G5RV for other bands (75, 40, & 17 mtrs.) I have a Drake L-4B linear but haven't used it for years, it's just not necessary. As for options I would get the KSB2, KAT100 and the KNB2 (only if you have a real noise problem). The KPA100 includes the RS-232 option. If you opt to not add the KPA100 & KAT100 be sure to include the low power antenna tuner KAT2, it's amazing what it will match. I would not get the DSP option until you build and evaluate the basic K2 first. I do not have it and doubt if it would be necessary. The basic filters in the K2 are that good. Configre the SSB filters for 2.2 kc. bandwidth. Just my two cents worth of advise. Good luck. Bob, VE3XM --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.749 / Virus Database: 501 - Release Date: 9/10/2004 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
