Hi all, I wonder if anyone has come up with a similar happening on the first alignment (Panel, control board and partial main board) I had intermitant problems when I first put it together, so I dismantled it and checked for bad joints, component values, etc. I found I had not soldered a switch. That put right I put it all back together again. And it almost worked. DISPLAY did not bring up the voltage/current values. Tapping menu several times brings up a menu but its behavior is must odd. Tapping menu again returns to the band and tuning is OK for a few seconds, rate also works.....then up comes menu all on its own. Lots of garbled numbers on the display looks like its switching between menu and
band very rapidly. I have no messages, Elecraft comes up OK then this happens. I've had it apart several times looking for problems, but I'm darned if I can see any. could a component failure cause this wierd behavior? Any help would be most appreciated, 73, Pete/N9PT _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
