Don,
I plan to do exactly as you suggest. It was fun getting the Edgeport
working, but I don't think it's good for running the Rigblaster. I posed
the question to a friend at work who is much more computer literate than I
and got the following suggestion: "Looks like you have to edit the registry
to stop Plug and play from constantly enumerating the serial ports.
http://support.microsoft.com/default.aspx?scid=kb;en-us;283063 has the gory
details." I checked the website and read some pretty scary stuff for
someone with my level of expertise. Thanks for emailing.
Parker WD8JOL
----- Original Message -----
From: "W3FPR - Don Wilhelm" <[EMAIL PROTECTED]>
To: "Parker Buckley" <[EMAIL PROTECTED]>
Sent: Tuesday, January 18, 2005 9:27 AM
Subject: Re: [Elecraft] Runaway Serial Port
Parker,
I can't offer a cure, but I would suggest you do 2 things - first put the
rigblaster on a non-USB converter Serial port and make certain the
rigblaster is not active during computer boot cycles. Secondly, you
should ba able to use the Edgeport/4 for connection to the transceivers
(logging apps and software rig control only) since these programs - if
properly written - should 'ride through' any such 'cycling' that WinDoze
may do at the USB/serial ports.
73,
Don W3FPR
----- Original Message -----
From: "Parker Buckley" <[EMAIL PROTECTED]>
To: <Elecraft@mailman.qth.net>
Sent: Tuesday, January 18, 2005 7:09 AM
Subject: [Elecraft] Runaway Serial Port
Used to be, when I started my Win98 computer, my Rigblaster would cycle
once for a couple of seconds, requiring that I be careful not to transmit
inadvertantly. When I upgraded to XP, I noticed the Rigblaster cycles 5
or 6 times in rapid succession during boot-up. Yesterday, I installed an
Edgeport 4 so I can run the Rigblaster and my KIO2 from a common USB port.
Now it's gotten worse. The Rigblaster will sometimes cycle 5 or 6 times
during normal Windows operation, like clicking on a feature in Powerpoint,
clicking to enlarge a view in Explorer, etc. It seems to be a random
event, in that it is not repeatable. Tonight, I'll put the Rigblaster
back on the serial port to see if that calms things down. Longer term,
I'd like to solve this as I have at least one more serial port application
I'd like to set up. Any ideas?
Parker K2 #2636
WD8JOL
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
