My K2/100 occasionally loses audio when it has been on a while with the AF GAIN turned down (K2 on butnotbeingused). My K2 is an early model in the 2200 series serial number, and the AF mod was done. It also has the KDSP2 and the 10th digit CW LED zero tuning mod. Whenever I lose the audio, I cannot get it back by turning the AF GAIN up. The RF GAIN works correctly and will display all 10 digits if turned CCW while the audio is lost. Signals show up normally on the S meter as I tune across the band. I noticed that I cannot activate the DSP when the audio is gone. All other functions are normal. The only way I can get the audio back is to cut the K2 off and then back on. The audio returns to normal status and may remain that way until I turn the K2 backoff. I have the K2 grounded, but I notice the display may momentarily change to either power setting or keyer speed as my hand approaches the K2. Is this an electrostatic condition I am going to have to live with? Has anyone else experienced this? If so, what can be done to correct this? Roy Morris W4WFB _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
