Pardon the earlier malformed subject... Hi all -
I'm working on K2 #4607. I'm to the point of Alignment and Test, Part II. A couple of problems have come up. 1) The K2 is failing the PLL range test with a range of 9.47kHz. L31 is currently 10uH. I've emailed elecraft regarding this. Grepping the archives indicate that replacing L31 with 12uH may solve this problem. What's the consensus on this? 2) I completed the remainder of the alignment for Part II. I'm able to receive signals on 40m. However, any change in frequency results in a chirp occuring about 1/10 of a second after any frequency change is made. This chirp occurs on all 40m frequencies, on all step increments and all filter settings. I suspect this is the PLL taking an excessive amount of time to lock up. Once locked, the receiver is very stable. All voltages on U4 are within a reasonable value. Any ideas? Is this related to 1)? Thanks! ~Don -------- _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
