Or as some have done, put a thick rubber band from the produce department of your local supermarket (as used on broccoli or asparagus) over the stock knob.
73, Bob N7XY On Wed, Mar 02, 2005 at 08:10:02AM -0500, W3FPR - Don Wilhelm wrote: > Dave, > > If you are referring to the Yaesu FT-900 knob, you can find details on my > website www.qsl.net/w3fpr. The smaller F-100 knob (with finger depression) > is preferred by some folks, but the FT-900 knob is heavier and my > preference. I have also seen the Yaesu rubber tire for the FT-900 knob > installed over the stock K2 knob - it takes a small amount of stretching, > but it works FB if you just want to get rid on the sharp outer edge of the > stock knob. > > 73, > Don W3FPR > > > -----Original Message----- > > > > I would like information on obtaining the knob I have > > seen on some > > K2's. It apprears to be heavy plastic with a rubber > > outter edge. Anyone > > having information such as part number and source > > please let me know . > > > > Thanks in advance, > > > > Dave K4SV... > > _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com